E-Cell System version 4 API reference

E-Cell System is a software platform for modeling, simulation and analysis of complex, heterogeneous and multi-scale systems like the cell.

E-Cell4 is a free and open-source software licensed under the GNU General Public License version 2. The source code is available on GitHub.

Please refer to https://github.com/ecell/ecell4 for information about installation instructions.

Tutorials

1. Brief Tour of E-Cell4 Simulations

First of all, you have to load the E-Cell4 library:

%matplotlib inline
from ecell4 import *

1.1. Quick Demo

There are three fundamental components consisting of E-Cell System version 4, which are Model, World, and Simulator. These components describe concepts in simulation.

• Model describes a problem to simulate as its name suggests.

• World describes a state, e.g. an initial state and a state at a time-point.

• Simulator describes a solver.

Model is independent from solvers. Every solver can share a single Model instance. Each solver alogrithm has a corresponding pair of World and Simulator (these pairs are capsulized into Factory class). World is not necessarily needed to be bound to Model and Simulator, but Simulator needs both Model and World.

Before running a simulation, you have to make a Model. E-Cell4 supports multiple ways to buld a Model (See 2. How to Build a Model local ipynb readthedocs). Here, we explain the simplest way using the with statement with reaction_rules:

with reaction_rules():
    A + B > C | 0.01  # equivalent to create_binding_reaction_rule
    C > A + B | 0.3   # equivalent to create_unbinding_reaction_rule

m1 = get_model()
print(m1)

<ecell4.core.NetworkModel object at 0x000002C0F32444B0>

Please remember to write parentheses () after reaction_rules. Here, a Model with two ReactionRules named m1 was built. Lines in the with block describe ReactionRules, a binding and unbinding reaction respectively. A kinetic rate for the mass action reaction is defined after a separator |, i.e. 0.01 or 0.3. In the form of ordinary differential equations, this model can be described as:

\[[\mathrm{A}]'=[\mathrm{B}]'=-[\mathrm{C}]=-0.01[\mathrm{A}][\mathrm{B}]+0.3[\mathrm{C}]\]

For more compact description, A + B == C | (0.01, 0.3) is also acceptable.

E-Cell4 has a simple interface for running simulation on a given model, called run_simulation. This enables for you to run simulations without instanciate World and Simulator by yourself. To solve this model, you have to give a volume, an initial value for each Species and duration of time:

run_simulation(10.0, model=m1, y0={'A': 60, 'B': 60}, volume=1.0)

To switch simulation algorithm, you only need to give the type of solver (ode is used as a default) as follows:

run_simulation(10.0, model=m1, y0={'A': 60, 'B': 60}, solver='gillespie')

1.2. Spatial Simulation and Visualization

E-Cell4 now supports multiple spatial simulation algorithms, egfrd, spatiocyte and meso. In addition to the model used in non-spatial solvers (ode and gillespie), these spatial solvers need extra information about each Species, i.e. a diffusion coefficient and radius.

The with statement with species_attributes is available to describe these properties:

with species_attributes():
    A | B | C | {'radius': '0.005', 'D': '1'}  # 'D' is for the diffusion coefficient

with reaction_rules():
    A + B == C | (0.01, 0.3)

m2 = get_model()

Even though the properties indicate a floating number, each attribute must be given as a string.

Now you can run a spatial simulation in the same way as above (in the case of egfrd, the time it takes to finish the simulation will be longer):

run_simulation(10.0, model=m2, y0={'A': 60, 'B': 60}, solver='meso')

Structure (e.g. membrane, cytoplasm and nucleus) is only supported by spatiocyte and meso for now. For the simulation, location that each species belongs to must be specified in its attribute.

with species_attributes():
    A | {'D': '1', 'location': 'S'}  # 'S' is a name of the structure

m3 = get_model()  # with no reactions

E-Cell4 supports primitive shapes as a structure like Sphere:

sphere = Sphere(Real3(0.5, 0.5, 0.5), 0.48)  # a center position and radius

E-Cell4 provides various kinds of Observers which log the state during a simulation. In the following two observers are declared to record the position of the molecule. FixedIntervalTrajectoryObserver logs a trajectory of a molecule, and FixedIntervalHDF5Observer saves World to a HDF5 file at the given time interval:

obs1 = FixedIntervalTrajectoryObserver(1e-3)
obs2 = FixedIntervalHDF5Observer(0.1, 'test%02d.h5')

run_simulation can accept structures and observers as arguments structure and observers (see also help(run_simulation)):

run_simulation(1.0, model=m3, y0={'A': 60}, structures={'S': sphere},
               solver='spatiocyte', observers=(obs1, obs2), return_type=None)

E-Cell4 has a function to visualize the world which is also capable of interactive visualization named viz.plot_world. viz.plot_world plots positions of molecules in 3D. In addition, by using load_world, you can easily restore the state of World from a HDF5 file:

# viz.plot_world(load_world('test00.h5'), species_list=['A'])
viz.plot_world(load_world('test00.h5'), species_list=['A'], interactive=True)

Also, for FixedIntervalTrajectoryObserver,viz.plot_trajectory generates a plot of the trajectory. (Again, it is possible to generate interactive plots.):

# viz.plot_trajectory(obs1)
viz.plot_trajectory(obs1, interactive=True)

For more details, see 5. How to Log and Visualize Simulations local ipynb readthedocs.

2. How to Build a Model

Model is composed of a set of Species and ReactionRules.

• Species describes a molecule entitie (e.g. a type or state of a protein) in the model. Species also has its attributes like the size.

• ReactionRule describes the interactions between Species (e.g. binding and unbinding).

%matplotlib inline
from ecell4 import *

2.1. Species

Species can be generated by giving its name:

sp1 = Species("A")
print(sp1.serial())

A

There are some naming conventions for the name of Species. This naming convention requires careful use of special symbols (e.g. parenthesis (), dot ., underbar _), numbers and blank.

Species has a set of APIs for handling its attributes:

sp1.set_attribute("radius", "0.005")
sp1.set_attribute("D", "1")
sp1.set_attribute("location", "cytoplasm")
print(sp1.get_attribute("radius"))
sp1.remove_attribute("radius")
print(sp1.has_attribute("radius"))

0.005
False

The arguments in set_attribute is the name of attribute and its value. Both of them have to be string. There is a shortcut to set the attributes above at once because radius, D (a diffusion coefficient) and location are frequently used.

sp1 = Species("A", "0.005", "1", "cytoplasm")  # serial, radius, D, location

The equality between Species is just evaluated based on their serial:

print(Species("A") == Species("B"), Species("A") == Species("A"))

False True

A Species consists of one or more UnitSpecies:

sp1 = Species()
usp1 = UnitSpecies("C")
print(usp1.serial())
sp1.add_unit(usp1)
sp1.add_unit(UnitSpecies("A"))
sp1.add_unit(UnitSpecies("B"))
print(sp1.serial(), len(sp1.units()))

C
C.A.B 3

A Species can be reproduced from a serial. In a serial, all UnitSpecies are joined with the separator, dot .. The order of UnitSpecies affects the Species comparison.

sp1 = Species("C.A.B")
print(sp1.serial())
print(Species("A.B.C") == Species("C.A.B"))
print(Species("A.B.C") == Species("A.B.C"))

C.A.B
False
True

UnitSpecies can have sites. Sites consists of a name, state and bond, and are sorted automatically in UnitSpecies. name must be unique in a UnitSpecies. All the value have to be string. Do not include parenthesis, dot and blank, and not start from numbers except for bond.

usp1 = UnitSpecies("A")
usp1.add_site("us", "u", "")
usp1.add_site("ps", "p", "_")
usp1.add_site("bs", "", "_")
print(usp1.serial())

A(bs^_,ps=p^_,us=u)

UnitSpecies can be also reproduced from its serial. Please be careful with the order of sites where a site with a state must be placed after sites with no state specification:

usp1 = UnitSpecies()
usp1.deserialize("A(bs^_, us=u, ps=p^_)")
print(usp1.serial())

A(bs^_,ps=p^_,us=u)

Of course, a site of UnitSpecies is available even in Species’ serial.

sp1 = Species("A(bs^1, ps=u).A(bs, ps=p^1)")
print(sp1.serial())
print(len(sp1.units()))

A(bs^1,ps=u).A(bs,ps=p^1)
2

The information (UnitSpecies and its site) is used for rule-based modeling. The way of rule-based modeling in E-Cell4 will be explained in 7. Introduction of Rule-based Modeling local ipynb readthedocs.

2.2. ReactionRule

ReactionRule consists of reactants, products and k. reactants and products are a list of Species, and k is a kinetic rate given as a floating number.

rr1 = ReactionRule()
rr1.add_reactant(Species("A"))
rr1.add_reactant(Species("B"))
rr1.add_product(Species("C"))
rr1.set_k(1.0)

Here is a binding reaction from A and B to C. In this reaction definition, you don’t need to set attributes to Species. The above series of operations can be written in one line using create_binding_reaction_rule(Species("A"), Species("B"), Species("C"), 1.0).

You can use as_string function to check ReactionRule:

rr1 = create_binding_reaction_rule(Species("A"), Species("B"), Species("C"), 1.0)
print(rr1.as_string())

A+B>C|1

You can also provide components to the constructor:

rr1 = ReactionRule([Species("A"), Species("B")], [Species("C")], 1.0)
print(rr1.as_string())

A+B>C|1

Basically ReactionRule represents a mass action reaction with the rate k. ode solver also supports rate laws thought it’s under development yet. ode.ODERatelaw is explained in 6. How to Solve ODEs with Rate Law Functions local ipynb readthedocs.

2.3. NetworkModel

You have learned how to create some Model components. Next let’s put the components in a Model.

sp1 = Species("A", "0.005", "1")
sp2 = Species("B", "0.005", "1")
sp3 = Species("C", "0.01", "0.5")

rr1 = create_binding_reaction_rule(Species("A"), Species("B"), Species("C"), 0.01)
rr2 = create_unbinding_reaction_rule(Species("C"), Species("A"), Species("B"), 0.3)

You can put the Species and ReactionRule with add_species_attribute and add_reaction_rule.

m1 = NetworkModel()
m1.add_species_attribute(sp1)
m1.add_species_attribute(sp2)
m1.add_species_attribute(sp3)
m1.add_reaction_rule(rr1)
m1.add_reaction_rule(rr2)

Now we have a simple model with the binding and unbinding reactions. You can use species_attributes and reaction_rules to check the Model.

print([sp.serial() for sp in m1.species_attributes()])
print([rr.as_string() for rr in m1.reaction_rules()])

['A', 'B', 'C']
['A+B>C|0.01', 'C>A+B|0.3']

The Species attributes are required for the spatial Model, but not required for the nonspatial Model (i.e. gillespie or ode). The attribute pushed first has higher priority than one pushed later. You can also attribute a Species based on the attributes in a Model.

sp1 = Species("A")
print(sp1.has_attribute("radius"))
sp2 = m1.apply_species_attributes(sp1)
print(sp2.has_attribute("radius"))
print(sp2.get_attribute("radius"))

False
True
0.005

For your information, all functions related to Species, ReactionRule and NetworkModel above are also available on C++ in the same way.

Finally, you can solve this model with run_simulation as explained in 1. Brief Tour of E-Cell4 Simulations local ipynb readthedocs :

run_simulation(10.0, model=m1, y0={'C': 60})

2.4. Python Utilities to Build a Model

As shown in 1. Brief Tour of E-Cell4 Simulations local ipynb readthedocs, E-Cell4 also provides the easier way to build a model using with statement:

with species_attributes():
    A | B | {'radius': '0.005', 'D': '1'}
    C | {'radius': '0.01', 'D': '0.5'}

with reaction_rules():
    A + B == C | (0.01, 0.3)

m1 = get_model()

For reversible reactions, <> is also available instead of == on Python 2, but deprecated on Python3. In the with statement, undeclared variables are automaticaly assumed to be a Species. Any Python variables, functions and statement are available even in the with block.

from math import log

ka, kd, kf = 0.01, 0.3, 0.1
tau = 10.0

with reaction_rules():
    E0 + S == ES | (ka, kd)

    if tau > 0:
        ES > E1 + P | kf
        E1 > E0 | log(2) / tau
    else:
        ES > E0 + P | kf

m1 = get_model()
del ka, kd, kf, tau

Meanwhile, once some variable is declared even outside the block, you can not use its name as a Species as follows:

A = 10

try:
    with reaction_rules():
        A + B == C | (0.01, 0.3)
except Exception as e:
    print(repr(e))

del A

RuntimeError('invalid expression; "10" given',)

where A + B == C exactly means 10 + B == C.

In the absence of left or right hand side of ReactionRule like synthesis or degradation, you may want to describe like:

with reaction_rules():
    A > | 1.0  # XXX: will raise SyntaxError
    > A | 1.0  # XXX: will raise SyntaxError

However, this is not accepted because of SyntaxError on Python. To describe this case, a special operator, tilde ~, is available. ~ sets a stoichiometric coefficient of the following Species as zero, which means the Species is just ignored in the ReactionRule.

with reaction_rules():
    ~A > A | 2.0  # equivalent to `create_synthesis_reaction_rule`
    A > ~A | 1.0  # equivalent to `create_degradation_reaction_rule`

m1 = get_model()
print([rr.as_string() for rr in m1.reaction_rules()])

['>A|2', 'A>|1']

The following Species’ name is not necessarily needed to be the same as others. The model above describes \([A]'=2-[A]\):

from math import exp
run_simulation(10.0, model=m1, opt_args=['-', lambda t: 2.0 * (1 - exp(-t)), '--'])

A chain of reactions can be described in one line. To split a line into two or more physical lines, wrap lines in a parenthesis:

with reaction_rules():
    (E + S == ES | (0.5, 1.0)
         > E + P | 1.5)

m1 = get_model()
print([rr.as_string() for rr in m1.reaction_rules()])

['E+S>ES|0.5', 'ES>E+S|1', 'ES>E+P|1.5']

The method uses global variables in ecell4.util.decorator (e.g. REACTION_RULES) to cache objects created in the with statement:

import ecell4.util.decorator

with reaction_rules():
    A + B == C | (0.01, 0.3)

print(ecell4.util.decorator.REACTION_RULES)  #XXX: Only for debugging
get_model()
print(ecell4.util.decorator.REACTION_RULES)  #XXX: Only for debugging

[<ecell4.core.ReactionRule object at 0x000001A123D02BA0>, <ecell4.core.ReactionRule object at 0x000001A123D02CD8>]
[]

Python decorator functions are also available. Decorator functions improve the modularity of the Model.

@species_attributes
def attrgen1(radius, D):
    A | B | {'radius': str(radius), 'D': str(D)}
    C | {'radius': str(radius * 2), 'D': str(D * 0.5)}

@reaction_rules
def rrgen1(kon, koff):
    A + B == C | (kon, koff)

attrs1 = attrgen1(0.005, 1)
rrs1 = rrgen1(0.01, 0.3)
print(attrs1)
print(rrs1)

[<ecell4.core.Species object at 0x000001A123D02CD8>, <ecell4.core.Species object at 0x000001A123D02BA0>, <ecell4.core.Species object at 0x000001A123D02DC8>]
[<ecell4.core.ReactionRule object at 0x000001A123D02D20>, <ecell4.core.ReactionRule object at 0x000001A123D02DE0>]

In contrast to the with statement, do not add parentheses after the decorator here. The functions decorated by reaction_rules and species_attributes return a list of ReactionRules and Species respectively. The list can be registered to Model at once by using add_reaction_rules and add_species_attributes.

m1 = NetworkModel()
m1.add_species_attributes(attrs1)
m1.add_reaction_rules(rrs1)
print(m1.num_reaction_rules())

2

This method is modular and reusable relative to the way using with statement.

3. How to Setup the Initial Condition

Here, we explain the basics of World classes. In E-Cell4, six types of World classes are supported now: spatiocyte.SpatiocyteWorld, egfrd.EGFRDWorld, bd.BDWorld, meso.MesoscopicWorld, gillespie.GillespieWorld, and ode.ODEWorld.

In the most of softwares, the initial condition is supposed to be a part of Model. But, in E-Cell4, the initial condition must be set up as World separately from Model. World stores an information about the state at a time point, such as a current time, the number of molecules, coordinate of molecules, structures, and random number generator. Meanwhile, Model contains the type of interactions between molecules and the common properties of molecules.

import ecell4

3.1. Common APIs of World

Even though World describes the spatial representation specific to the corresponding algorithm, it has compatible APIs. In this section, we introduce the common interfaces of the six World classes.

from ecell4.core import *
from ecell4.gillespie import GillespieWorld
from ecell4.ode import ODEWorld
from ecell4.spatiocyte import SpatiocyteWorld
from ecell4.bd import BDWorld
from ecell4.meso import MesoscopicWorld
from ecell4.egfrd import EGFRDWorld

World classes accept different sets of arguments in the constructor, which determine the parameters specific to the algorithm. However, at least, all World classes can be instantiated only with their size, named edge_lengths. The type of edge_lengths is Real3, which represents a triplet of Reals. In E-Cell4, all 3-dimensional positions are treated as a Real3. See also 8. More about 1. Brief Tour of E-Cell4 Simulations.

edge_lengths = Real3(1, 2, 3)
w1 = GillespieWorld(edge_lengths)
w2 = ODEWorld(edge_lengths)
w3 = SpatiocyteWorld(edge_lengths)
w4 = BDWorld(edge_lengths)
w5 = MesoscopicWorld(edge_lengths)
w6 = EGFRDWorld(edge_lengths)

World has getter methods for the size and volume.

print(tuple(w1.edge_lengths()), w1.volume())
print(tuple(w2.edge_lengths()), w2.volume())
print(tuple(w3.edge_lengths()), w3.volume())
print(tuple(w4.edge_lengths()), w4.volume())
print(tuple(w5.edge_lengths()), w5.volume())
print(tuple(w6.edge_lengths()), w6.volume())

((1.0, 2.0, 3.0), 6.0)
((1.0, 2.0, 3.0), 6.0)
((1.0, 2.0, 3.0), 6.0)
((1.0, 2.0, 3.0), 6.0)
((1.0, 2.0, 3.0), 6.0)
((1.0, 2.0, 3.0), 6.0)

Next, let’s add molecules into the World. Here, you must give Species attributed with radius and D to tell the shape of molecules. In the example below 0.0025 corresponds to radius and 1 to D. Positions of the molecules are randomly determined in the World if needed. 10 in add_molecules function represents the number of molecules to be added.

sp1 = Species("A", "0.0025", "1")
w1.add_molecules(sp1, 10)
w2.add_molecules(sp1, 10)
w3.add_molecules(sp1, 10)
w4.add_molecules(sp1, 10)
w5.add_molecules(sp1, 10)
w6.add_molecules(sp1, 10)

After model is bound to world, you do not need to rewrite the radius and D once set in Species (unless you want to change it).

m = NetworkModel()
m.add_species_attribute(Species("A", "0.0025", "1"))
m.add_species_attribute(Species("B", "0.0025", "1"))

w1.bind_to(m)
w2.bind_to(m)
w3.bind_to(m)
w4.bind_to(m)
w5.bind_to(m)
w6.bind_to(m)
w1.add_molecules(Species("B"), 20)
w2.add_molecules(Species("B"), 20)
w3.add_molecules(Species("B"), 20)
w4.add_molecules(Species("B"), 20)
w5.add_molecules(Species("B"), 20)
w6.add_molecules(Species("B"), 20)

Similarly, remove_molecules and num_molecules_exact are also available.

w1.remove_molecules(Species("B"), 5)
w2.remove_molecules(Species("B"), 5)
w3.remove_molecules(Species("B"), 5)
w4.remove_molecules(Species("B"), 5)
w5.remove_molecules(Species("B"), 5)
w6.remove_molecules(Species("B"), 5)

print(w1.num_molecules_exact(Species("A")), w2.num_molecules_exact(Species("A")), w3.num_molecules_exact(Species("A")), w4.num_molecules_exact(Species("A")), w5.num_molecules_exact(Species("A")), w6.num_molecules_exact(Species("A")))
print(w1.num_molecules_exact(Species("B")), w2.num_molecules_exact(Species("B")), w3.num_molecules_exact(Species("B")), w4.num_molecules_exact(Species("B")), w5.num_molecules_exact(Species("B")), w6.num_molecules_exact(Species("B")))

(10, 10, 10, 10, 10, 10)
(15, 15, 15, 15, 15, 15)

Unlike num_molecules_exact, num_molecules returns the numbers that match a given Species in rule-based fashion. When all Species in the World has no molecular interaction, num_molecules is same with num_molecules_exact.

print(w1.num_molecules(Species("A")), w2.num_molecules(Species("A")), w3.num_molecules(Species("A")), w4.num_molecules(Species("A")), w5.num_molecules(Species("A")), w6.num_molecules(Species("A")))
print(w1.num_molecules(Species("B")), w2.num_molecules(Species("B")), w3.num_molecules(Species("B")), w4.num_molecules(Species("B")), w5.num_molecules(Species("B")), w6.num_molecules(Species("B")))

(10, 10, 10, 10, 10, 10)
(15, 15, 15, 15, 15, 15)

World holds its simulation time.

print(w1.t(), w2.t(), w3.t(), w4.t(), w5.t(), w6.t())
w1.set_t(1.0)
w2.set_t(1.0)
w3.set_t(1.0)
w4.set_t(1.0)
w5.set_t(1.0)
w6.set_t(1.0)
print(w1.t(), w2.t(), w3.t(), w4.t(), w5.t(), w6.t())

(0.0, 0.0, 0.0, 0.0, 0.0, 0.0)
(1.0, 1.0, 1.0, 1.0, 1.0, 1.0)

Finally, you can save and load the state of a World into/from a HDF5 file.

w1.save("gillespie.h5")
w2.save("ode.h5")
w3.save("spatiocyte.h5")
w4.save("bd.h5")
w5.save("meso.h5")
w6.save("egfrd.h5")
del w1, w2, w3, w4, w5, w6

w1 = GillespieWorld()
w2 = ODEWorld()
w3 = SpatiocyteWorld()
w4 = BDWorld()
w5 = MesoscopicWorld()
w6 = EGFRDWorld()
print(w1.t(), tuple(w1.edge_lengths()), w1.volume(), w1.num_molecules(Species("A")), w1.num_molecules(Species("B")))
print(w2.t(), tuple(w2.edge_lengths()), w2.volume(), w2.num_molecules(Species("A")), w2.num_molecules(Species("B")))
print(w3.t(), tuple(w3.edge_lengths()), w3.volume(), w3.num_molecules(Species("A")), w3.num_molecules(Species("B")))
print(w4.t(), tuple(w4.edge_lengths()), w4.volume(), w4.num_molecules(Species("A")), w4.num_molecules(Species("B")))
print(w5.t(), tuple(w5.edge_lengths()), w5.volume(), w5.num_molecules(Species("A")), w5.num_molecules(Species("B")))
print(w6.t(), tuple(w6.edge_lengths()), w6.volume(), w6.num_molecules(Species("A")), w6.num_molecules(Species("B")))

(0.0, (1.0, 1.0, 1.0), 1.0, 0, 0)
(0.0, (1.0, 1.0, 1.0), 1.0, 0, 0)
(0.0, (1.0, 1.0, 1.0), 1.0, 0, 0)
(0.0, (1.0, 1.0, 1.0), 1.0, 0, 0)
(0.0, (1.0, 1.0, 1.0), 1.0, 0, 0)
(0.0, (1.0, 1.0, 1.0), 1.0, 0, 0)

w1.load("gillespie.h5")
w2.load("ode.h5")
w3.load("spatiocyte.h5")
w4.load("bd.h5")
w5.load("meso.h5")
w6.load("egfrd.h5")
print(w1.t(), tuple(w1.edge_lengths()), w1.volume(), w1.num_molecules(Species("A")), w1.num_molecules(Species("B")))
print(w2.t(), tuple(w2.edge_lengths()), w2.volume(), w2.num_molecules(Species("A")), w2.num_molecules(Species("B")))
print(w3.t(), tuple(w3.edge_lengths()), w3.volume(), w3.num_molecules(Species("A")), w3.num_molecules(Species("B")))
print(w4.t(), tuple(w4.edge_lengths()), w4.volume(), w4.num_molecules(Species("A")), w4.num_molecules(Species("B")))
print(w5.t(), tuple(w5.edge_lengths()), w5.volume(), w5.num_molecules(Species("A")), w5.num_molecules(Species("B")))
print(w6.t(), tuple(w6.edge_lengths()), w6.volume(), w6.num_molecules(Species("A")), w6.num_molecules(Species("B")))
del w1, w2, w3, w4, w5, w6

(1.0, (1.0, 2.0, 3.0), 6.0, 10, 15)
(1.0, (1.0, 2.0, 3.0), 6.0, 10, 15)
(1.0, (1.0, 2.0, 3.0), 6.0, 10, 15)
(1.0, (1.0, 2.0, 3.0), 6.0, 10, 15)
(1.0, (1.0, 2.0, 3.0), 6.0, 10, 15)
(1.0, (1.0, 2.0, 3.0), 6.0, 10, 15)

All the World classes also accept a HDF5 file path as an unique argument of the constructor.

print(GillespieWorld("gillespie.h5").t())
print(ODEWorld("ode.h5").t())
print(SpatiocyteWorld("spatiocyte.h5").t())
print(BDWorld("bd.h5").t())
print(MesoscopicWorld("meso.h5").t())
print(EGFRDWorld("egfrd.h5").t())

1.0
1.0
1.0
1.0
1.0
1.0

3.2. How to Get Positions of Molecules

World also has the common functions to access the coordinates of the molecules.

w1 = GillespieWorld()
w2 = ODEWorld()
w3 = SpatiocyteWorld()
w4 = BDWorld()
w5 = MesoscopicWorld()
w6 = EGFRDWorld()

First, you can place a molecule at the certain position with new_particle.

sp1 = Species("A", "0.0025", "1")
pos = Real3(0.5, 0.5, 0.5)
(pid1, p1), suc1 = w1.new_particle(sp1, pos)
(pid2, p2), suc2 = w2.new_particle(sp1, pos)
(pid3, p3), suc3 = w3.new_particle(sp1, pos)
(pid4, p4), suc4 = w4.new_particle(sp1, pos)
(pid5, p5), suc5 = w5.new_particle(sp1, pos)
(pid6, p6), suc6 = w6.new_particle(sp1, pos)

new_particle returns a particle created and whether it’s succeeded or not. The resolution in representation of molecules differs. For example, GillespieWorld has almost no information about the coordinate of molecules. Thus, it simply ignores the given position, and just counts up the number of molecules here.

ParticleID is a pair of Integers named lot and serial.

print(pid6.lot(), pid6.serial())
print(pid6 == ParticleID((0, 1)))

(0, 1L)
True

Particle simulators, i.e. spatiocyte, bd and egfrd, provide an interface to access a particle by its id. has_particle returns if a particles exists or not for the given ParticleID.

# print(w1.has_particle(pid1))
# print(w2.has_particle(pid2))
print(w3.has_particle(pid3))  # => True
print(w4.has_particle(pid4))  # => True
# print(w5.has_particle(pid5))
print(w6.has_particle(pid6))  # => True

True
True
True

After checking the existency, you can get the partcle by get_particle as follows.

# pid1, p1 = w1.get_particle(pid1)
# pid2, p2 = w2.get_particle(pid2)
pid3, p3 = w3.get_particle(pid3)
pid4, p4 = w4.get_particle(pid4)
# pid5, p5 = w5.get_particle(pid5)
pid6, p6 = w6.get_particle(pid6)

Particle consists of species, position, radius and D.

# print(p1.species().serial(), tuple(p1.position()), p1.radius(), p1.D())
# print(p2.species().serial(), tuple(p2.position()), p2.radius(), p2.D())
print(p3.species().serial(), tuple(p3.position()), p3.radius(), p3.D())
print(p4.species().serial(), tuple(p4.position()), p4.radius(), p4.D())
# print(p5.species().serial(), tuple(p5.position()), p5.radius(), p5.D())
print(p6.species().serial(), tuple(p6.position()), p6.radius(), p6.D())

(u'A', (0.5062278801751902, 0.5080682368868706, 0.5), 0.0025, 1.0)
(u'A', (0.5, 0.5, 0.5), 0.0025, 1.0)
(u'A', (0.5, 0.5, 0.5), 0.0025, 1.0)

In the case of spatiocyte, a particle position is automatically round to the center of the voxel nearest to the given position.

You can even move the position of the particle. update_particle replace the particle specified with the given ParticleID with the given Particle and return False. If no corresponding particle is found, create new particle and return True. If you give a Particle with the different type of Species, the Species of the Particle will be also changed.

newp = Particle(sp1, Real3(0.3, 0.3, 0.3), 0.0025, 1)
# print(w1.update_particle(pid1, newp))
# print(w2.update_particle(pid2, newp))
print(w3.update_particle(pid3, newp))
print(w4.update_particle(pid4, newp))
# print(w5.update_particle(pid5, newp))
print(w6.update_particle(pid6, newp))

False
False
False

list_particles and list_particles_exact return a list of pairs of ParticleID and Particle in the World. World automatically makes up for the gap with random numbers. For example, GillespieWorld returns a list of positions randomly distributed in the World size.

print(w1.list_particles_exact(sp1))
# print(w2.list_particles_exact(sp1))  # ODEWorld has no member named list_particles
print(w3.list_particles_exact(sp1))
print(w4.list_particles_exact(sp1))
print(w5.list_particles_exact(sp1))
print(w6.list_particles_exact(sp1))

[(<ecell4.core.ParticleID object at 0x7fdfd28e8b58>, <ecell4.core.Particle object at 0x7fdfd28e8bd0>)]
[(<ecell4.core.ParticleID object at 0x7fdfd28e8b58>, <ecell4.core.Particle object at 0x7fdfd28e8af8>)]
[(<ecell4.core.ParticleID object at 0x7fdfd28e8b58>, <ecell4.core.Particle object at 0x7fdfd28e8a38>)]
[(<ecell4.core.ParticleID object at 0x7fdfd28e8b58>, <ecell4.core.Particle object at 0x7fdfd28e8bd0>)]
[(<ecell4.core.ParticleID object at 0x7fdfd28e8b58>, <ecell4.core.Particle object at 0x7fdfd28e8af8>)]

You can remove a specific particle with remove_particle.

# w1.remove_particle(pid1)
# w2.remove_particle(pid2)
w3.remove_particle(pid3)
w4.remove_particle(pid4)
# w5.remove_particle(pid5)
w6.remove_particle(pid6)
# print(w1.has_particle(pid1))
# print(w2.has_particle(pid2))
print(w3.has_particle(pid3))  # => False
print(w4.has_particle(pid4))  # => False
# print(w5.has_particle(pid5))
print(w6.has_particle(pid6))  # => False

False
False
False

3.3. Lattice-based Coordinate

In addition to the common interface, each World can have their own interfaces. As an example, we explain methods to handle lattice-based coordinate here. SpatiocyteWorld is based on a space discretized to hexiagonal close packing lattices, LatticeSpace.

w = SpatiocyteWorld(Real3(1, 2, 3), voxel_radius=0.01)
w.bind_to(m)

The size of a single lattice, called Voxel, can be obtained by voxel_radius(). SpatiocyteWorld has methods to get the numbers of rows, columns, and layers. These sizes are automatically calculated based on the given edge_lengths at the construction.

print(w.voxel_radius())  # => 0.01
print(tuple(w.shape()))  # => (62, 152, 116)
# print(w.col_size(), w.row_size(), w.layer_size())  # => (62, 152, 116)
print(w.size())  # => 1093184 = 62 * 152 * 116

0.01
(62, 152, 116)
(62, 152, 116)
1093184

A position in the lattice-based space is treated as an Integer3, column, row and layer, called a global coordinate. Thus, SpatiocyteWorld provides the function to convert the Real3 into a lattice-based coordinate.

# p1 = Real3(0.5, 0.5, 0.5)
# g1 = w.position2global(p1)
# p2 = w.global2position(g1)
# print(tuple(g1))  # => (31, 25, 29)
# print(tuple(p2))  # => (0.5062278801751902, 0.5080682368868706, 0.5)

(31, 25, 29)
(0.5062278801751902, 0.5080682368868706, 0.5)

In SpatiocyteWorld, the global coordinate is translated to a single integer. It is just called a coordinate. You can also treat the coordinate as in the same way with a global coordinate.

# p1 = Real3(0.5, 0.5, 0.5)
# c1 = w.position2coordinate(p1)
# p2 = w.coordinate2position(c1)
# g1 = w.coord2global(c1)
# print(c1)  # => 278033
# print(tuple(p2))  # => (0.5062278801751902, 0.5080682368868706, 0.5)
# print(tuple(g1))  # => (31, 25, 29)

278033
(0.5062278801751902, 0.5080682368868706, 0.5)
(31, 25, 29)

With these coordinates, you can handle a Voxel, which represents a Particle object. Instead of new_particle, new_voxel provides the way to create a new Voxel with a coordinate.

c1 = w.position2coordinate(Real3(0.5, 0.5, 0.5))
((pid, v), is_succeeded) = w.new_voxel(Species("A"), c1)
print(pid, v, is_succeeded)

(<ecell4.core.ParticleID object at 0x7fdfd28e8a38>, <ecell4.core.Voxel object at 0x7fdfd28e8c18>, True)

A Voxel consists of species, coordinate, radius and D.

print(v.species().serial(), v.coordinate(), v.radius(), v.D())  # => (u'A', 278033, 0.0025, 1.0)

(u'A', 278033, 0.0025, 1.0)

Of course, you can get a voxel and list voxels with get_voxel and list_voxels_exact similar to get_particle and list_particles_exact.

print(w.num_voxels_exact(Species("A")))
print(w.list_voxels_exact(Species("A")))
print(w.get_voxel(pid))

1
[(<ecell4.core.ParticleID object at 0x7fdfd28e8ae0>, <ecell4.core.Voxel object at 0x7fdfd28e8c30>)]
(<ecell4.core.ParticleID object at 0x7fdfd28e8ae0>, <ecell4.core.Voxel object at 0x7fdfd28e8bd0>)

You can move and update the voxel with update_voxel corresponding to update_particle.

c2 = w.position2coordinate(Real3(0.5, 0.5, 1.0))
w.update_voxel(pid, Voxel(v.species(), c2, v.radius(), v.D()))
pid, newv = w.get_voxel(pid)
print(c2)  # => 278058
print(newv.species().serial(), newv.coordinate(), newv.radius(), newv.D())  # => (u'A', 278058, 0.0025, 1.0)
print(w.num_voxels_exact(Species("A")))  # => 1

278058
(u'A', 278058, 0.0025, 1.0)
1

Finally, remove_voxel remove a voxel as remove_particle does.

print(w.has_voxel(pid))  # => True
w.remove_voxel(pid)
print(w.has_voxel(pid))  # => False

True
False

3.4 Structure

w1 = GillespieWorld()
w2 = ODEWorld()
w3 = SpatiocyteWorld()
w4 = BDWorld()
w5 = MesoscopicWorld()
w6 = EGFRDWorld()

By using a Shape object, you can confine initial positions of molecules to a part of World. In the case below, 60 molecules are positioned inside the given Sphere. Diffusion of the molecules placed here is NOT restricted in the Shape. This Shape is only for the initialization.

sp1 = Species("A", "0.0025", "1")
sphere = Sphere(Real3(0.5, 0.5, 0.5), 0.3)
w1.add_molecules(sp1, 60, sphere)
w2.add_molecules(sp1, 60, sphere)
w3.add_molecules(sp1, 60, sphere)
w4.add_molecules(sp1, 60, sphere)
w5.add_molecules(sp1, 60, sphere)
w6.add_molecules(sp1, 60, sphere)

A property of Species, 'location', is available to restrict diffusion of molecules. 'location' is not fully supported yet, but only supported in spatiocyte and meso. add_structure defines a new structure given as a pair of Species and Shape.

membrane = SphericalSurface(Real3(0.5, 0.5, 0.5), 0.4)  # This is equivalent to call `Sphere(Real3(0.5, 0.5, 0.5), 0.4).surface()`
w3.add_structure(Species("M"), membrane)
w5.add_structure(Species("M"), membrane)

After defining a structure, you can bind molecules to the structure as follows:

sp2 = Species("B", "0.0025", "0.1", "M")  # `'location'` is the fourth argument
w3.add_molecules(sp2, 60)
w5.add_molecules(sp2, 60)

The molecules bound to a Species named B diffuse on a structure named M, which has a shape of SphericalSurface (a hollow sphere). In spatiocyte, a structure is represented as a set of particles with Species M occupying a voxel. It means that molecules not belonging to the structure is not able to overlap the voxel and it causes a collision. On the other hand, in meso, a structure means a list of subvolumes. Thus, a structure doesn’t avoid an incursion of other particles.

3.5. Random Number Generator

A random number generator is also a part of World. All World except ODEWorld store a random number generator, and updates it when the simulation needs a random value. On E-Cell4, only one class GSLRandomNumberGenerator is implemented as a random number generator.

rng1 = GSLRandomNumberGenerator()
print([rng1.uniform_int(1, 6) for _ in range(20)])

[6, 1, 2, 6, 2, 3, 6, 5, 4, 5, 5, 4, 2, 5, 4, 2, 3, 3, 2, 2]

With no argument, the random number generator is always initialized with a seed, 0.

rng2 = GSLRandomNumberGenerator()
print([rng2.uniform_int(1, 6) for _ in range(20)])  # => same as above

[6, 1, 2, 6, 2, 3, 6, 5, 4, 5, 5, 4, 2, 5, 4, 2, 3, 3, 2, 2]

You can initialize the seed with an integer as follows:

rng2 = GSLRandomNumberGenerator()
rng2.seed(15)
print([rng2.uniform_int(1, 6) for _ in range(20)])

[6, 5, 2, 4, 1, 1, 3, 5, 2, 6, 4, 1, 2, 5, 2, 5, 1, 2, 2, 6]

When you call the seed function with no input, the seed is drawn from the current time.

rng2 = GSLRandomNumberGenerator()
rng2.seed()
print([rng2.uniform_int(1, 6) for _ in range(20)])

[6, 2, 1, 5, 6, 2, 6, 2, 6, 6, 5, 6, 2, 3, 5, 3, 6, 1, 4, 3]

GSLRandomNumberGenerator provides several ways to get a random number.

print(rng1.uniform(0.0, 1.0))
print(rng1.uniform_int(0, 100))
print(rng1.gaussian(1.0))

0.0303352042101
33
0.893555545521

World accepts a random number generator at the construction. As a default, GSLRandomNumberGenerator() is used. Thus, when you don’t give a generator, behavior of the simulation is always same (determinisitc).

rng = GSLRandomNumberGenerator()
rng.seed()
w1 = GillespieWorld(Real3(1, 1, 1), rng=rng)

You can access the GSLRandomNumberGenerator in a World through rng function.

print(w1.rng().uniform(0.0, 1.0))

0.966634188779

rng() returns a shared pointer to the GSLRandomNumberGenerator. Thus, in the example above, rng and w1.rng() point exactly the same thing.

4. How to Run a Simulation

In sections 2 and 3, we explained the way to build a model and to setup the intial state. Now, it is the time to run a simulation. Corresponding to World classes, six Simulator classes are there: spatiocyte.SpatiocyteSimulator, egfrd.EGFRDSimulator, bd.BDSimulator, meso.MesoscopicSimulator, gillespie.GillespieSimulator, and ode.ODESimulator. Each Simulator class only accepts the corresponding type of World, but all of them allow the same Model.

import ecell4

4.1. How to Setup a Simulator

Except for the initialization (so-called constructor function) with arguments specific to the algorithm, all Simulators have the same APIs.

from ecell4.core import *
from ecell4.gillespie import GillespieWorld, GillespieSimulator
from ecell4.ode import ODEWorld, ODESimulator
from ecell4.spatiocyte import SpatiocyteWorld, SpatiocyteSimulator
from ecell4.bd import BDWorld, BDSimulator
from ecell4.meso import MesoscopicWorld, MesoscopicSimulator
from ecell4.egfrd import EGFRDWorld, EGFRDSimulator

Before constructing a Simulator, parepare a Model and a World corresponding to the type of Simulator.

from ecell4 import species_attributes, reaction_rules, get_model

with species_attributes():
    A | B | C | {'D': '1', 'radius': '0.005'}

with reaction_rules():
    A + B == C | (0.01, 0.3)

m = get_model()

w1 = GillespieWorld()
w2 = ODEWorld()
w3 = SpatiocyteWorld()
w4 = BDWorld()
w5 = MesoscopicWorld()
w6 = EGFRDWorld()

Simulator requires both Model and World in this order at the construction.

sim1 = GillespieSimulator(m, w1)
sim2 = ODESimulator(m, w2)
sim3 = SpatiocyteSimulator(m, w3)
sim4 = BDSimulator(m, w4)
sim5 = MesoscopicSimulator(m, w5)
sim6 = EGFRDSimulator(m, w6)

If you bind the Model to the World, you need only the World to create a Simulator.

w1.bind_to(m)
w2.bind_to(m)
w3.bind_to(m)
w4.bind_to(m)
w5.bind_to(m)
w6.bind_to(m)

sim1 = GillespieSimulator(w1)
sim2 = ODESimulator(w2)
sim3 = SpatiocyteSimulator(w3)
sim4 = BDSimulator(w4)
sim5 = MesoscopicSimulator(w5)
sim6 = EGFRDSimulator(w6)

Of course, the Model and World bound to a Simulator can be drawn from Simulator in the way below:

print(sim1.model(), sim1.world())
print(sim2.model(), sim2.world())
print(sim3.model(), sim3.world())
print(sim4.model(), sim4.world())
print(sim5.model(), sim5.world())
print(sim6.model(), sim6.world())

(<ecell4.core.Model object at 0x7f6b329d1af8>, <ecell4.gillespie.GillespieWorld object at 0x7f6b329d1a08>)
(<ecell4.ode.ODENetworkModel object at 0x7f6b329d1af8>, <ecell4.ode.ODEWorld object at 0x7f6b329d1ae0>)
(<ecell4.core.Model object at 0x7f6b329d1af8>, <ecell4.spatiocyte.SpatiocyteWorld object at 0x7f6b329d1a08>)
(<ecell4.core.Model object at 0x7f6b329d1af8>, <ecell4.bd.BDWorld object at 0x7f6b329d1ae0>)
(<ecell4.core.Model object at 0x7f6b329d1af8>, <ecell4.meso.MesoscopicWorld object at 0x7f6b329d1ac8>)
(<ecell4.core.Model object at 0x7f6b329d1af8>, <ecell4.egfrd.EGFRDWorld object at 0x7f6b329d1ae0>)

After updating the World by yourself, you must initialize the internal state of a Simulator before running simulation.

w1.add_molecules(Species('C'), 60)
w2.add_molecules(Species('C'), 60)
w3.add_molecules(Species('C'), 60)
w4.add_molecules(Species('C'), 60)
w5.add_molecules(Species('C'), 60)
w6.add_molecules(Species('C'), 60)

sim1.initialize()
sim2.initialize()
sim3.initialize()
sim4.initialize()
sim5.initialize()
sim6.initialize()

For algorithms with a fixed step interval, the Simulator also requires dt.

sim2.set_dt(1e-6)  # ODESimulator. This is optional
sim4.set_dt(1e-6)  # BDSimulator

4.2. Running Simulation

For running simulation, Simulator provides two APIs, step and run.

step() advances a simulation for the time that the Simulator expects, next_time().

print(sim1.t(), sim1.next_time(), sim1.dt())
print(sim2.t(), sim2.next_time(), sim2.dt())  # => (0.0, 1e-6, 1e-6)
print(sim3.t(), sim3.next_time(), sim3.dt())
print(sim4.t(), sim4.next_time(), sim4.dt())  # => (0.0, 1e-6, 1e-6)
print(sim5.t(), sim5.next_time(), sim5.dt())
print(sim6.t(), sim6.next_time(), sim6.dt())  # => (0.0, 0.0, 0.0)

(0.0, 0.032171880483933143, 0.032171880483933143)
(0.0, 1e-06, 1e-06)
(0.0, 1.6666666666666667e-05, 1.6666666666666667e-05)
(0.0, 1e-06, 1e-06)
(0.0, 0.029999537310460653, 0.029999537310460653)
(0.0, 0.0, 0.0)

sim1.step()
sim2.step()
sim3.step()
sim4.step()
sim5.step()
sim6.step()

print(sim1.t())
print(sim2.t())  # => 1e-6
print(sim3.t())
print(sim4.t())  # => 1e-6
print(sim5.t())
print(sim6.t())  # => 0.0

0.0321718804839
1e-06
1.66666666667e-05
1e-06
0.0299995373105
0.0

last_reactions() returns a list of pairs of ReactionRule and ReactionInfo which occurs at the last step. Each algorithm have its own implementation of ReactionInfo. See help(module.ReactionInfo) for details.

print(sim1.last_reactions())
# print(sim2.last_reactions())
print(sim3.last_reactions())
print(sim4.last_reactions())
print(sim5.last_reactions())
print(sim6.last_reactions())

[(<ecell4.core.ReactionRule object at 0x7f6b329d1ae0>, <ecell4.gillespie.ReactionInfo object at 0x7f6b329d1af8>)]
[]
[]
[(<ecell4.core.ReactionRule object at 0x7f6b329d1ae0>, <ecell4.meso.ReactionInfo object at 0x7f6b329d1af8>)]
[]

step(upto) advances a simulation for next_time if next_time is less than upto, or for upto otherwise. step(upto) returns whether the time does NOT reach the limit, upto.

print(sim1.step(1.0), sim1.t())
print(sim2.step(1.0), sim2.t())
print(sim3.step(1.0), sim3.t())
print(sim4.step(1.0), sim4.t())
print(sim5.step(1.0), sim5.t())
print(sim6.step(1.0), sim6.t())

(True, 0.11785771174833615)
(True, 2e-06)
(True, 3.3333333333333335e-05)
(True, 2e-06)
(True, 0.0709074540101994)
(True, 0.0)

To run a simulation just until the time, upto, call step(upto) while it returns True.

while sim1.step(1.0): pass
while sim2.step(0.001): pass
while sim3.step(0.001): pass
while sim4.step(0.001): pass
while sim5.step(1.0): pass
while sim6.step(0.001): pass

print(sim1.t())  # => 1.0
print(sim2.t())  # => 0.001
print(sim3.t())  # => 0.001
print(sim4.t())  # => 0.001
print(sim5.t())  # => 1.0
print(sim6.t())  # => 0.001

1.0
0.001
0.001
0.001
1.0
0.001

This is just what run does. run(tau) advances a simulation upto t()+tau.

sim1.run(1.0)
sim2.run(0.001)
sim3.run(0.001)
sim4.run(0.001)
sim5.run(1.0)
sim6.run(0.001)

print(sim1.t())  # => 2.0
print(sim2.t())  # => 0.002
print(sim3.t())  # => 0.002
print(sim4.t())  # => 0.002
print(sim5.t())  # => 2.0
print(sim6.t())  # => 0.02

2.0
0.002
0.002
0.002
2.0
0.002

num_steps returns the number of steps during the simulation.

print(sim1.num_steps())
print(sim2.num_steps())
print(sim3.num_steps())
print(sim4.num_steps())
print(sim5.num_steps())
print(sim6.num_steps())

37
2001
120
2001
34
581

4.3. Capsulizing Algorithm into a Factory Class

Owing to the portability of a Model and consistent APIs of Worlds and Simulators, it is very easy to write a script common in algorithms. However, when switching the algorithm, still we have to rewrite the name of classes in the code, one by one.

To avoid the trouble, E-Cell4 also provides a Factory class for each algorithm. Factory encapsulates World and Simulator with their arguments needed for the construction. By using Factory class, your script could be portable and robust agaist changes in the algorithm.

from ecell4.gillespie import GillespieFactory
from ecell4.ode import ODEFactory
from ecell4.spatiocyte import SpatiocyteFactory
from ecell4.bd import BDFactory
from ecell4.meso import MesoscopicFactory
from ecell4.egfrd import EGFRDFactory

Factory just provides two functions, create_world and create_simulator.

def singlerun(f, m):
    w = f.create_world(Real3(1, 1, 1))
    w.bind_to(m)
    w.add_molecules(Species('C'), 60)

    sim = f.create_simulator(w)
    sim.run(0.01)
    print(sim.t(), w.num_molecules(Species('C')))

singlerun above is free from the algorithm. Thus, by just switching Factory, you can easily compare the results.

singlerun(GillespieFactory(), m)
singlerun(ODEFactory(), m)
singlerun(SpatiocyteFactory(), m)
singlerun(BDFactory(bd_dt_factor=1), m)
singlerun(MesoscopicFactory(), m)
singlerun(EGFRDFactory(), m)

(0.01, 60)
(0.01, 59)
(0.01, 60)
(0.01, 60)
(0.01, 60)
(0.01, 60)

When you need to provide several parameters to initialize World or Simulator, run_simulation also accepts Factory instead of solver.

from ecell4.util import run_simulation
print(run_simulation(0.01, model=m, y0={'C': 60}, return_type='array', solver=GillespieFactory())[-1])
print(run_simulation(0.01, model=m, y0={'C': 60}, return_type='array', solver=ODEFactory())[-1])
print(run_simulation(0.01, model=m, y0={'C': 60}, return_type='array', solver=SpatiocyteFactory())[-1])
print(run_simulation(0.01, model=m, y0={'C': 60}, return_type='array', solver=BDFactory(bd_dt_factor=1))[-1])
print(run_simulation(0.01, model=m, y0={'C': 60}, return_type='array', solver=MesoscopicFactory())[-1])
print(run_simulation(0.01, model=m, y0={'C': 60}, return_type='array', solver=EGFRDFactory())[-1])

[0.01, 0.0, 0.0, 60.0]
[0.01, 0.17972919304001073, 0.17972919304001067, 59.82027080696036]
[0.01, 0.0, 0.0, 60.0]
[0.01, 0.0, 0.0, 60.0]
[0.01, 0.0, 0.0, 60.0]
[0.01, 0.0, 0.0, 60.0]

5. How to Log and Visualize Simulations

Here we explain how to take a log of simulation results and how to visualize it.

%matplotlib inline
import math
from ecell4 import *

5.1. Logging Simulations with Observers

E-Cell4 provides special classes for logging, named Observer. Observer class is given when you call the run function of Simulator.

def create_simulator(f=gillespie.GillespieFactory()):
    m = NetworkModel()
    A, B, C = Species('A', '0.005', '1'), Species('B', '0.005', '1'), Species('C', '0.005', '1')
    m.add_reaction_rule(create_binding_reaction_rule(A, B, C, 0.01))
    m.add_reaction_rule(create_unbinding_reaction_rule(C, A, B, 0.3))
    w = f.create_world()
    w.bind_to(m)
    w.add_molecules(C, 60)
    sim = f.create_simulator(w)
    sim.initialize()
    return sim

One of most popular Observer is FixedIntervalNumberObserver, which logs the number of molecules with the given time interval. FixedIntervalNumberObserver requires an interval and a list of serials of Species for logging.

obs1 = FixedIntervalNumberObserver(0.1, ['A', 'B', 'C'])
sim = create_simulator()
sim.run(1.0, obs1)

data function of FixedIntervalNumberObserver returns the data logged.

print(obs1.data())

[[0.0, 0.0, 0.0, 60.0], [0.1, 0.0, 0.0, 60.0], [0.2, 0.0, 0.0, 60.0], [0.30000000000000004, 5.0, 5.0, 55.0], [0.4, 8.0, 8.0, 52.0], [0.5, 8.0, 8.0, 52.0], [0.6000000000000001, 8.0, 8.0, 52.0], [0.7000000000000001, 11.0, 11.0, 49.0], [0.8, 14.0, 14.0, 46.0], [0.9, 14.0, 14.0, 46.0], [1.0, 15.0, 15.0, 45.0]]

targets() returns a list of Species, which you specified as an argument of the constructor.

print([sp.serial() for sp in obs1.targets()])

['A', 'B', 'C']

NumberObserver logs the number of molecules after every steps when a reaction occurs. This observer is useful to log all reactions, but not available for ode.

obs1 = NumberObserver(['A', 'B', 'C'])
sim = create_simulator()
sim.run(1.0, obs1)
print(obs1.data())

[[0.0, 0.0, 0.0, 60.0], [0.143979748309557, 1.0, 1.0, 59.0], [0.263959301731782, 2.0, 2.0, 58.0], [0.28549985484415447, 3.0, 3.0, 57.0], [0.2920290844608921, 4.0, 4.0, 56.0], [0.3151450201904092, 5.0, 5.0, 55.0], [0.32962099109027987, 6.0, 6.0, 54.0], [0.33943151256600035, 7.0, 7.0, 53.0], [0.38459684239249475, 8.0, 8.0, 52.0], [0.4402392101074317, 9.0, 9.0, 51.0], [0.4488367232148584, 10.0, 10.0, 50.0], [0.4724492407095052, 11.0, 11.0, 49.0], [0.48969169545303415, 12.0, 12.0, 48.0], [0.5926648902430811, 13.0, 13.0, 47.0], [0.7112014766673606, 14.0, 14.0, 46.0], [0.7268968273742534, 15.0, 15.0, 45.0], [0.7889733307696482, 16.0, 16.0, 44.0], [0.7938779425321273, 17.0, 17.0, 43.0], [0.9703902424683863, 18.0, 18.0, 42.0], [0.9712948910756202, 17.0, 17.0, 43.0], [1.0, 17.0, 17.0, 43.0]]

TimingNumberObserver allows you to give the times for logging as an argument of its constructor.

obs1 = TimingNumberObserver([0.0, 0.1, 0.2, 0.5, 1.0], ['A', 'B', 'C'])
sim = create_simulator()
sim.run(1.0, obs1)
print(obs1.data())

[[0.0, 0.0, 0.0, 60.0], [0.1, 0.0, 0.0, 60.0], [0.2, 0.0, 0.0, 60.0], [0.5, 10.0, 10.0, 50.0], [1.0, 16.0, 16.0, 44.0]]

run function accepts multile Observers at once.

obs1 = NumberObserver(['C'])
obs2 = FixedIntervalNumberObserver(0.1, ['A', 'B'])
sim = create_simulator()
sim.run(1.0, [obs1, obs2])
print(obs1.data())
print(obs2.data())

[[0.0, 60.0], [0.22087040257109863, 59.0], [0.22720792132387785, 58.0], [0.24968763863882104, 57.0], [0.2637930785790673, 56.0], [0.27337221983130383, 55.0], [0.35394818219048224, 54.0], [0.36231206722433756, 53.0], [0.38536272493723256, 52.0], [0.6152314487155562, 51.0], [0.6759207676775343, 50.0], [0.6807518102635762, 49.0], [0.7009006683808036, 48.0], [0.7485557651303876, 47.0], [0.7530285146153741, 46.0], [0.9214853607237395, 45.0], [1.0, 45.0]]
[[0.0, 0.0, 0.0], [0.1, 0.0, 0.0], [0.2, 0.0, 0.0], [0.30000000000000004, 5.0, 5.0], [0.4, 8.0, 8.0], [0.5, 8.0, 8.0], [0.6000000000000001, 8.0, 8.0], [0.7000000000000001, 11.0, 11.0], [0.8, 14.0, 14.0], [0.9, 14.0, 14.0], [1.0, 15.0, 15.0]]

FixedIntervalHDF5Observedr logs the whole data in a World to an output file with the fixed interval. Its second argument is a prefix for output filenames. filename() returns the name of a file scheduled to be saved next. At most one format string like %02d is allowed to use a step count in the file name. When you do not use the format string, it overwrites the latest data to the file.

obs1 = FixedIntervalHDF5Observer(0.2, 'test%02d.h5')
print(obs1.filename())
sim = create_simulator()
sim.run(1.0, obs1) # Now you have steped 5 (1.0/0.2) times
print(obs1.filename())

test00.h5
test06.h5

w = load_world('test05.h5')
print(w.t(), w.num_molecules(Species('C')))

1.0 44

The usage of FixedIntervalCSVObserver is almost same with that of FixedIntervalHDF5Observer. It saves positions (x, y, z) of particles with the radius (r) and serial number of Species (sid) to a CSV file.

obs1 = FixedIntervalCSVObserver(0.2, "test%02d.csv")
print(obs1.filename())
sim = create_simulator()
sim.run(1.0, obs1)
print(obs1.filename())

test00.csv
test06.csv

Here is the first 10 lines in the output CSV file.

print(''.join(open("test05.csv").readlines()[: 10]))

x,y,z,r,sid
0.17508278810419142,0.12197625380940735,0.53627523058094084,0,0
0.24078186159022152,0.62765785818919539,0.7254820850212127,0,0
0.40445487247779965,0.16720660566352308,0.92957371729426086,0,0
0.24083335651084781,0.59580284473486245,0.51183571317233145,0,0
0.90290508698672056,0.4137285016477108,0.39729581261053681,0,0
0.51044316007755697,0.26319809840060771,0.40705726365558803,0,0
0.84177179471589625,0.085374288959428668,0.64473599148914218,0,0
0.54177056765183806,0.098819603677839041,0.17240164172835648,0,0
0.28669063560664654,0.71829434810206294,0.91102162329480052,0,0

For particle simulations, E-Cell4 also provides Observer to trace a trajectory of a molecule, named FixedIntervalTrajectoryObserver. When no ParticleID is specified, it logs all the trajectories. Once some ParticleID is lost for the reaction during a simulation, it just stop to trace the particle any more.

sim = create_simulator(spatiocyte.SpatiocyteFactory(0.005))
obs1 = FixedIntervalTrajectoryObserver(0.01)
sim.run(0.1, obs1)

print([tuple(pos) for pos in obs1.data()[0]])

[(0.46540305112880387, 0.739008344562721, 0.48), (0.2122891110412088, 0.9266471820493494, 0.665), (0.49806291436591293, 0.8689121551303868, 0.685), (0.7838367176906171, 0.8313843876330611, 0.64), (0.9961258287318259, 0.7967433714816836, 0.5), (0.7920016834998943, 0.9122134253196088, 0.63), (0.7348469228349536, 0.7534421012924616, 0.515), (0.9716309313039941, 0.851591647054698, 0.525), (1.1349302474895393, 0.9122134253196088, 0.63), (0.9961258287318259, 0.9439676901250381, 0.725), (0.718516991216399, 0.8833459118601275, 0.93)]

Generally, World assumes a periodic boundary for each plane. To avoid the big jump of a particle at the edge due to the boundary condition, FixedIntervalTrajectoryObserver tries to keep the shift of positions. Thus, the positions stored in the Observer are not necessarily limited in the cuboid given for the World. To track the diffusion over the boundary condition accurately, the step interval for logging must be small enough. Of course, you can disable this option. See help(FixedIntervalTrajectoryObserver).

5.2. Visualization of Data Logged

In this section, we explain the visualization tools for data logged by Observer.

Firstly, for time course data, viz.plot_number_observer plots the data provided by NumberObserver, FixedIntervalNumberObserver and TimingNumberObserver. For the detailed usage of viz.plot_number_observer, see help(viz.plot_number_observer).

obs1 = NumberObserver(['C'])
obs2 = FixedIntervalNumberObserver(0.1, ['A', 'B'])
sim = create_simulator()
sim.run(10.0, [obs1, obs2])

viz.plot_number_observer(obs1, obs2)

You can set the style for plotting, and even add an arbitrary function to plot.

viz.plot_number_observer(obs1, '-', obs2, ':', lambda t: 60 * math.exp(-0.3 * t), '--')

Plotting in the phase plane is also available by specifing the x-axis and y-axis.

viz.plot_number_observer(obs2, 'o', x='A', y='B')

For spatial simulations, to visualize the state of World, viz.plot_world is available. This function plots the points of particles in three-dimensional volume in the interactive way. You can save the image by clicking a right button on the drawing region.

sim = create_simulator(spatiocyte.SpatiocyteFactory(0.005))
# viz.plot_world(sim.world())
viz.plot_world(sim.world(), interactive=False)

You can also make a movie from a series of HDF5 files, given as a FixedIntervalHDF5Observer. NOTE: viz.plot_movie requires an extra library, ffmpeg, when interactive=False.

sim = create_simulator(spatiocyte.SpatiocyteFactory(0.005))
obs1 = FixedIntervalHDF5Observer(0.02, 'test%02d.h5')
sim.run(1.0, obs1)
viz.plot_movie(obs1)

Finally, corresponding to FixedIntervalTrajectoryObserver, viz.plot_trajectory provides a visualization of particle trajectories.

sim = create_simulator(spatiocyte.SpatiocyteFactory(0.005))
obs1 = FixedIntervalTrajectoryObserver(1e-3)
sim.run(1, obs1)
# viz.plot_trajectory(obs1)
viz.plot_trajectory(obs1, interactive=False)

6. How to Solve ODEs with Rate Law Functions

Although the ode solver accepts NetworkModel, ode.ODESimulator owns its model class ode.ODENetworkModel and ode.ODEReactionRule for the extension. The interface of these classes are almost same with Model classes and ReactionRule. Here, we explain the usage specific to ode especially about ode.ODERatelaw.

%matplotlib inline
from ecell4 import *

However, the rate law support in ode is under development. Some functions might be deprecated in the future. Currently, to enable rate laws, the option ecell4.util.decorator.ENABLE_RATELAW must be activated as follows:

util.decorator.ENABLE_RATELAW = True

6.1. ode.ODEReactionRule

ode.ODEReactionRule has almost same members with ReactionRule.

rr1 = ReactionRule()
rr1.add_reactant(Species("A"))
rr1.add_reactant(Species("B"))
rr1.add_product(Species("C"))
rr1.set_k(1.0)
print(len(rr1.reactants()))  # => 2
print(len(rr1.products()))  # => 1
print(rr1.k())  # => 1.0
print(rr1.as_string())  # => A+B>C|1

2
1
1.0
A+B>C|1

rr2 = ode.ODEReactionRule()
rr2.add_reactant(Species("A"))
rr2.add_reactant(Species("B"))
rr2.add_product(Species("C"))
rr2.set_k(1.0)
print(len(rr2.reactants()))  # => 2
print(len(rr2.products()))  # => 1
print(rr2.k())  # => 1.0
print(rr2.as_string())  # => A+B>C|1

2
1
1.0
A+B>C|1

In addition to the common members, ode.ODEReactionRule can store stoichiometric coefficients for each Species:

rr2 = ode.ODEReactionRule()
rr2.add_reactant(Species("A"), 1.0)
rr2.add_reactant(Species("B"), 2.0)
rr2.add_product(Species("C"), 2.5)
rr2.set_k(1.0)
print(rr2.as_string())

A+2*B>2.5*C|1

You can also access to the coefficients as follows:

print(rr2.reactants_coefficients())  # => [1.0, 2.0]
print(rr2.products_coefficients())  # => [2.5]

[1.0, 2.0]
[2.5]

6.2. ode.ODERatelaw

ode.ODEReactionRule can be bound to a ode.ODERatelaw. ode.ODERatelaw provides a function to calculate a derivative (flux or velocity) based on the given values of Species. ode.ODERatelawMassAction is a default class bound to ode.ODEReactionRule.

rr1 = ode.ODEReactionRule()
rr1.add_reactant(Species("A"))
rr1.add_reactant(Species("B"))
rr1.add_product(Species("C"))
rl1 = ode.ODERatelawMassAction(2.0)
rr1.set_ratelaw(rl1)  # equivalent to rr1.set_k(2.0)
print(rr1.as_string())

A+B>C|2

ode.ODERatelawCallback enables the user-defined function for calculating a flux.

def mass_action(reactants, products, volume, t, rr):
    veloc = 2.0 * volume
    for value in reactants:
        veloc *= value / volume
    return veloc

rl2 = ode.ODERatelawCallback(mass_action)
rr1.set_ratelaw(rl2)
print(rr1.as_string())

A+B>C|mass_action

The function bound must accept five arguments and return a floating number as a velocity. The first and second list contain a value for each reactants and products respectively. When you need to access the stoichiometric coefficients, use rr (ode.ODEReactionRule) in the arguments.

A lambda function is available too.

rl2 = ode.ODERatelawCallback(lambda r, p, v, t, rr: 2.0 * r[0] * r[1])
rr1.set_k(0)
rr1.set_ratelaw(rl2)
print(rr1.as_string())

A+B>C|<lambda>

6.3. ode.ODENetworkModel

ode.ODENetworkModel accepts both ReactionRule and ode.ODEReactionRule. ReactionRule is implicitly converted and stored as a ode.ODEReactionRule.

m1 = ode.ODENetworkModel()
rr1 = create_unbinding_reaction_rule(Species("C"), Species("A"), Species("B"), 3.0)
m1.add_reaction_rule(rr1)
rr2 = ode.ODEReactionRule(create_binding_reaction_rule(Species("A"), Species("B"), Species("C"), 0.0))
rr2.set_ratelaw(ode.ODERatelawCallback(lambda r, p, v, t, rr: 0.1 * r[0] * r[1]))
m1.add_reaction_rule(rr2)

You can access to the list of ode.ODEReactionRules in ode.ODENetworkModel via its member reaction_rules().

print([rr.as_string() for rr in m1.reaction_rules()])

['C>A+B|3', 'A+B>C|<lambda>']

Finally, you can run simulations in the same way with other solvers as follows:

run_simulation(1.0, model=m1, y0={'A': 60, 'B': 60})

Modeling with Python decorators is also available by specifying a function instead of a rate (floating number). When a floating number is set, it is assumed to be a kinetic rate of a mass action reaction, but not a constant velocity.

with reaction_rules():
    A + B == C | (lambda r, *args: 0.1 * reduce(mul, r), 3.0)

m1 = get_model()

For the simplicity, you can directory defining the equation with Species names as follows:

with reaction_rules():
    A + B == C | (0.1 * A * B, 3.0)

m1 = get_model()

When you call a Species (in the rate law) which is not listed as a reactant or product, it is automatically added to the list as an enzyme.

with reaction_rules():
    S > P | 1.0 * E * S / (30.0 + S)

m1 = get_model()
print(m1.reaction_rules()[0].as_string())

S+E>P+E|((1.0*E*S)/(30.0+S))

where E in the equation is appended to both reacant and product lists.

run_simulation(10.0, model=m1, y0={'S': 60, 'E': 30})

Please be careful about typo in Species’ name. When you make a typo, it is unintentionally recognized as a new enzyme:

with reaction_rules():
    A13P2G > A23P2G | 1500 * A13B2G  # typo: A13P2G -> A13B2G

m1 = get_model()
print(m1.reaction_rules()[0].as_string())

A13P2G+A13B2G>A23P2G+A13B2G|(1500*A13B2G)

When you want to disable the automatic declaration of enzymes, inactivate util.decorator.ENABLE_IMPLICIT_DECLARATION. If its value is False, the above case will raise an error:

util.decorator.ENABLE_IMPLICIT_DECLARATION = False

try:
    with reaction_rules():
        A13P2G > A23P2G | 1500 * A13B2G
except RuntimeError as e:
    print(repr(e))

util.decorator.ENABLE_IMPLICIT_DECLARATION = True

RuntimeError('unknown variable [A13B2G] was used.',)

Although E-Cell4 is specialized for a simulation of biochemical reaction network, by using a synthetic reaction rule, ordinary differential equations can be translated intuitively. For example, the Lotka-Volterra equations:

\[\begin{split}\frac{dx}{dt} = Ax - Bxy\\\frac{dy}{dt} = -Cx + Dxy\end{split}\]

where \(A=1.5, B=1, C=3, D=1, x(0)=10, y(0)=5\), are solved as follows:

with reaction_rules():
    A, B, C, D = 1.5, 1, 3, 1

    ~x > x | A * x - B * x * y
    ~y > y | -C * y + D * x * y

run_simulation(10, model=get_model(), y0={'x': 10, 'y': 5})

6.4. References in a Rate Law

Here, we exlain the details in the rate law definition.

First, when you use simpler definitions of a rate law with Species, only a limited number of mathematical functions (e.g. exp, log, sin, cos, tan, asin, acos, atan, and pi) are available there even if you declare the function outside the block.

try:
    from math import erf

    with reaction_rules():
        S > P | erf(S / 30.0)
except TypeError as e:
    print(repr(e))

TypeError('a float is required',)

This is because erf is tried to be evaluated agaist S / 30.0 first, but it is not a floating number. In contrast, the following case is acceptable:

from math import erf

with reaction_rules():
    S > P | erf(2.0) * S

m1 = get_model()
print(m1.reaction_rules()[0].as_string())

S>P|(0.995322265019*S)

where only the result of erf(2.0), 0.995322265019, is passed to the rate law. Thus, the rate law above has no reference to the erf function. Similarly, a value of variables declared outside is acceptable, but not as a reference.

kcat, Km = 1.0, 30.0

with reaction_rules():
    S > P | kcat * E * S / (Km + S)

m1 = get_model()
print(m1.reaction_rules()[0].as_string())
kcat = 2.0
print(m1.reaction_rules()[0].as_string())

S+E>P+E|((1.0*E*S)/(30.0+S))
S+E>P+E|((1.0*E*S)/(30.0+S))

Even if you change the value of a variable, it does not affect the rate law.

On the other hand, when you use your own function to define a rate law, it can hold a reference to variables outside.

k1 = 1.0

with reaction_rules():
    S > P | (lambda r, *args: k1 * r[0])  # referring k1

m1 = get_model()

obs1 = run_simulation(2, model=m1, y0={"S": 60}, return_type='observer')
k1 = 2.0
obs2 = run_simulation(2, model=m1, y0={"S": 60}, return_type='observer')

viz.plot_number_observer(obs1, '-', obs2, '--')

However, in this case, it is better to make a new model for each set of parameters.

def create_model(k):
    with reaction_rules():
        S > P | k

    return get_model()

obs1 = run_simulation(2, model=create_model(k=1.0), y0={"S": 60}, return_type='observer')
obs2 = run_simulation(2, model=create_model(k=2.0), y0={"S": 60}, return_type='observer')
# viz.plot_number_observer(obs1, '-', obs2, '--')

6.5. More about ode

In ode.ODEWorld, a value for each Species is a floating number. However, for the compatibility, the common member num_molecules and add_molecules regard the value as an integer.

w = ode.ODEWorld()
w.add_molecules(Species("A"), 2.5)
print(w.num_molecules(Species("A")))

2

To set/get a real number, use set_value and get_value:

w.set_value(Species("B"), 2.5)
print(w.get_value(Species("A")))
print(w.get_value(Species("B")))

2.0
2.5

As a default, ode.ODESimulator employs the Rosenblock method, called ROSENBROCK4_CONTROLLER, to solve ODEs. In addition to that, two solvers, EULER and RUNGE_KUTTA_CASH_KARP54, are available. ROSENBROCK4_CONTROLLER and RUNGE_KUTTA_CASH_KARP54 adaptively change the step size during time evolution due to error controll, but EULER does not.

with reaction_rules():
    A > ~A | 1.0

m1 = get_model()

w1 = ode.ODEWorld()
w1.set_value(Species("A"), 1.0)
sim1 = ode.ODESimulator(m1, w1, ode.EULER)
sim1.set_dt(0.01) # This is only effective for EULER
sim1.run(3.0, obs1)

ode.ODEFactory also accepts a solver type and a default step interval.

run_simulation(3.0, model=m1, y0={"A": 1.0}, solver=('ode', ode.EULER, 0.01))

See also examples listed below:

• Glycolysis of Human Erythrocytes

• Drosophila Circadian Clock

• Attractors

7. Introduction of Rule-based Modeling

E-Cell4 provides the rule-based modeling environment.

%matplotlib inline
from ecell4 import *

7.1. Species.count

First, Species provides a function count. Species.count counts the number of matches between Species.

sp1 = Species("A(b^1).B(b^1)")
sp2 = Species("A(b^1).A(b^1)")
pttrn1 = Species("A")
print(pttrn1.count(sp1))  # => 1
print(pttrn1.count(sp2))  # => 2

1
2

In the above case, Species.count just returns the number of UnitSpecies named A in Species regardless of its sites. To specify the occupancy of a bond:

pttrn1 = Species("A(b)")
pttrn2 = Species("A(b^_)")
print(pttrn1.count(sp1))  # => 0
print(pttrn2.count(sp1))  # => 1

0
1

where A(b) suggests that bond b is empty, and A(b^_) does that bond b is occupied. Underscore _ means wildcard here. Similarly, you can also specify the state of sites.

sp1 = Species("A(b=u)")
pttrn1 = Species("A(b)")
pttrn2 = Species("A(b=u)")
print(pttrn1.count(sp1))  # => 1
print(pttrn2.count(sp1))  # => 1

1
1

A(b) says nothing about the state, but A(b=u) specifies both state and bond. A(b=u) means that UnitSpecies named A has a site named b which state is u and the bond is empty. Wildcard _ is acceptable even in a state and name.

sp1 = Species("A(b=u^1).B(b=p^1)")
pttrn1 = Species("A(b=_^_)")  # This is equivalent to `A(b^_)` here
pttrn2 = Species("_(b^_)")
print(pttrn1.count(sp1))  # => 1
print(pttrn2.count(sp1))  # => 2

1
2

Wildcard _ matches anything, and the pattern matched is not consistent between wildcards even in the Species. On the other hand, named wildcards, _1, _2 and so on, confer the consistency within the match.

sp1 = Species("A(b^1).B(b^1)")
pttrn1 = Species("_._")
pttrn2 = Species("_1._1")
print(pttrn1.count(sp1))  # => 2
print(pttrn2.count(sp1))  # => 0

2
0

where the first pattern matches in two ways (A.B and B.A), but the second matches nothing. Species.count always distinguishes the order of UnitSpecies even in the symmetric case. Thus, _1._1 does not mean the number of dimers.

sp1 = Species("A(b^1).A(b^1)")
pttrn1 = Species("_1._1")
print(pttrn1.count(sp1))  # => 2

2

7.2. ReactionRule.count and generate

ReactionRule also has a function to count matches agaist the given list of reactants.

rr1 = create_unimolecular_reaction_rule(Species("A(p=u)"), Species("A(p=p)"), 1.0)
sp1 = Species("A(b^1,p=u).B(b^1)")
print(rr1.count([sp1]))  # => 1

1

ReactionRule.generate returns a list of ReactionRules generated based on the matches.

print([rr.as_string() for rr in rr1.generate([sp1])])

[u'A(b^1,p=u).B(b^1)>A(b^1,p=p).B(b^1)|1']

ReactionRule.generate matters the order of Species in the given list:

rr1 = create_binding_reaction_rule(Species("A(b)"), Species("B(b)"), Species("A(b^1).B(b^1)"), 1.0)
sp1 = Species("A(b)")
sp2 = Species("B(b)")
print([rr.as_string() for rr in rr1.generate([sp1, sp2])])
print([rr.as_string() for rr in rr1.generate([sp2, sp1])])

[u'A(b)+B(b)>A(b^1).B(b^1)|1']
[]

On the current implementation, ReactionRule.generate does not always return a list of unique ReactionRules.

sp1 = Species("A(b,c^1).A(b,c^1)")
sp2 = Species("B(b,c^1).B(b,c^1)")
print(rr1.count([sp1, sp2]))  # => 4
print([rr.as_string() for rr in rr1.generate([sp1, sp2])])

4
[u'A(b,c^1).A(b,c^1)+B(b,c^1).B(b,c^1)>A(b^1,c^2).A(b,c^2).B(b^1,c^3).B(b,c^3)|1', u'A(b,c^1).A(b,c^1)+B(b,c^1).B(b,c^1)>A(b^1,c^2).A(b,c^2).B(b,c^3).B(b^1,c^3)|1', u'A(b,c^1).A(b,c^1)+B(b,c^1).B(b,c^1)>A(b,c^1).A(b^2,c^1).B(b^2,c^3).B(b,c^3)|1', u'A(b,c^1).A(b,c^1)+B(b,c^1).B(b,c^1)>A(b,c^1).A(b^2,c^1).B(b,c^3).B(b^2,c^3)|1']

ReactionRules listed above look different, but all the products suggest the same.

print(set([unique_serial(rr.products()[0]) for rr in rr1.generate([sp1, sp2])]))

set([u'A(b,c^1).A(b^2,c^1).B(b^2,c^3).B(b,c^3)'])

This is because these ReactionRules are generated based on the diffent matches though they produces the same Species. For details, See the section below.

Wildcard is also available in ReactionRule.

rr1 = create_unimolecular_reaction_rule(Species("A(p=u^_)"), Species("A(p=p^_)"), 1.0)
print([rr.as_string() for rr in rr1.generate([Species("A(p=u^1).B(p^1)")])])

[u'A(p=u^1).B(p^1)>A(p=p^1).B(p^1)|1']

Of course, wildcard is accepted as a name of UnitSpecies.

rr1 = create_unimolecular_reaction_rule(Species("_(p=u)"), Species("_(p=p)"), 1.0)
print([rr.as_string() for rr in rr1.generate([Species("A(p=u)")])])
print([rr.as_string() for rr in rr1.generate([Species("B(b^1,p=u).C(b^1,p=u)")])])

[u'A(p=u)>A(p=p)|1']
[u'B(b^1,p=u).C(b^1,p=u)>B(b^1,p=p).C(b^1,p=u)|1', u'B(b^1,p=u).C(b^1,p=u)>B(b^1,p=u).C(b^1,p=p)|1']

Named wildcards in a state is useful to specify the correspondence between sites.

rr1 = create_unbinding_reaction_rule(Species("AB(a=_1, b=_2)"), Species("B(b=_2)"), Species("A(a=_1)"), 1.0)
print([rr.as_string() for rr in rr1.generate([Species("AB(a=x, b=y)")])])
print([rr.as_string() for rr in rr1.generate([Species("AB(a=y, b=x)")])])

[u'AB(a=x,b=y)>B(b=y)+A(a=x)|1']
[u'AB(a=y,b=x)>B(b=x)+A(a=y)|1']

Nameless wildcard _ does not care about equality between matches. Products are generated in order.

rr1 = create_binding_reaction_rule(Species("_(b)"), Species("_(b)"), Species("_(b^1)._(b^1)"), 1.0)
print(rr1.as_string())
print([rr.as_string() for rr in rr1.generate([Species("A(b)"), Species("A(b)")])])
print([rr.as_string() for rr in rr1.generate([Species("A(b)"), Species("B(b)")])])

_(b)+_(b)>_(b^1)._(b^1)|1
[u'A(b)+A(b)>A(b^1).A(b^1)|1']
[u'A(b)+B(b)>A(b^1).B(b^1)|1']

For its symmetry, the former case above is sometimes preffered to have a half of the original kinetic rate. This is because the number of combinations of molecules in the former is \(n(n-1)/2\) even though that in the later is \(n^2\), where both numbers of A and B molecules are \(n\). This is true for gillespie and ode. However, in egfrd and spatiocyte, a kinetic rate is intrinsic one, and not affected by the number of combinations. Thus, in E-Cell4, no modification in the rate is done even for the case. See Homodimerization and Annihilation for the difference between algorithms.

In constrast to nameless wildcard, named wildcard keeps its consistency, and always suggests the same value in the ReactionRule.

rr1 = create_binding_reaction_rule(Species("_1(b)"), Species("_1(b)"), Species("_1(b^1)._1(b^1)"), 1.0)
print(rr1.as_string())
print([rr.as_string() for rr in rr1.generate([Species("A(b)"), Species("A(b)")])])
print([rr.as_string() for rr in rr1.generate([Species("A(b)"), Species("B(b)")])])  # => []

_1(b)+_1(b)>_1(b^1)._1(b^1)|1
[u'A(b)+A(b)>A(b^1).A(b^1)|1']
[]

Named wildcard is consistent even between UnitSpecies’ and site’s names, technically.

rr1 = create_binding_reaction_rule(Species("A(b=_1)"), Species("_1(b)"), Species("A(b=_1^1)._1(b^1)"), 1.0)
print(rr1.as_string())
print([rr.as_string() for rr in rr1.generate([Species("A(b=B)"), Species("A(b)")])])  # => []
print([rr.as_string() for rr in rr1.generate([Species("A(b=B)"), Species("B(b)")])])

A(b=_1)+_1(b)>A(b=_1^1)._1(b^1)|1
[]
[u'A(b=B)+B(b)>A(b=B^1).B(b^1)|1']

7.3. NetfreeModel

NetfreeModel is a Model class for the rule-based modeling. The interface of NetfreeModel is almost same with NetworkModel, but takes into account rules and matches.

rr1 = create_binding_reaction_rule(Species("A(r)"), Species("A(l)"), Species("A(r^1).A(l^1)"), 1.0)

m1 = NetfreeModel()
m1.add_reaction_rule(rr1)
print(m1.num_reaction_rules())

m2 = NetworkModel()
m2.add_reaction_rule(rr1)
print(m2.num_reaction_rules())

1
1

Python notation explained in 2. How to Build a Model is available too. To get a model as NetfreeModel, set is_netfree True in get_model:

with reaction_rules():
    A(r) + A(l) > A(r^1).A(l^1) | 1.0

m1 = get_model(is_netfree=True)
print(repr(m1))

<ecell4.core.NetfreeModel object at 0x7fbb44dc7708>

Model.query_reaction_rules returns a list of ReactionRules agaist the given reactants. NetworkModel just returns ReactionRules based on the equality of Species.

print(len(m2.query_reaction_rules(Species("A(r)"), Species("A(l)"))))  # => 1
print(len(m2.query_reaction_rules(Species("A(l,r)"), Species("A(l,r)"))))  # => 0

1
0

On the other hand, NetfreeModel genarates the list by applying the stored ReactionRules in the rule-based way.

print(len(m1.query_reaction_rules(Species("A(r)"), Species("A(l)"))))  # => 1
print(len(m1.query_reaction_rules(Species("A(l,r)"), Species("A(l,r)"))))  # => 1

1
1

NetfreeModel does not cache generated objects. Thus, NetfreeModel.query_reaction_rules is slow, but needs less memory.

print(m1.query_reaction_rules(Species("A(l,r)"), Species("A(l,r)"))[0].as_string())
print(m1.query_reaction_rules(Species("A(l,r^1).A(l^1,r)"), Species("A(l,r)"))[0].as_string())
print(m1.query_reaction_rules(Species("A(l,r^1).A(l^1,r)"), Species("A(l,r^1).A(l^1,r)"))[0].as_string())

A(l,r)+A(l,r)>A(l,r^1).A(l^1,r)|2
A(l,r^1).A(l^1,r)+A(l,r)>A(l,r^1).A(l^1,r^2).A(l^2,r)|2
A(l,r^1).A(l^1,r)+A(l,r^1).A(l^1,r)>A(l,r^1).A(l^1,r^2).A(l^2,r^3).A(l^3,r)|2

NetfreeModel.expand expands NetfreeModel to NetworkModel by iteratively applying ReactionRules agaist the given seeds.

with reaction_rules():
    _(b) + _(b) == _(b^1)._(b^1) | (1.0, 1.0)

m3 = get_model(True)
print(m3.num_reaction_rules())

m4 = m3.expand([Species("A(b)"), Species("B(b)")])
print(m4.num_reaction_rules())
print([rr.as_string() for rr in m4.reaction_rules()])

2
6
[u'A(b)+A(b)>A(b^1).A(b^1)|1', u'A(b)+B(b)>A(b^1).B(b^1)|1', u'B(b)+B(b)>B(b^1).B(b^1)|1', u'A(b^1).A(b^1)>A(b)+A(b)|1', u'A(b^1).B(b^1)>A(b)+B(b)|1', u'B(b^1).B(b^1)>B(b)+B(b)|1']

To avoid the infinite iteration for expansion, you can limit the maximum number of iterations and of UnitSpecies in a Species.

m2 = m1.expand([Species("A(l, r)")], 100, {Species("A"): 4})
print(m2.num_reaction_rules())  # => 4
print([rr.as_string() for rr in m2.reaction_rules()])

4
[u'A(l,r)+A(l,r)>A(l,r^1).A(l^1,r)|2', u'A(l,r^1).A(l^1,r)+A(l,r^1).A(l^1,r)>A(l,r^1).A(l^1,r^2).A(l^2,r^3).A(l^3,r)|2', u'A(l,r)+A(l,r^1).A(l^1,r)>A(l,r^1).A(l^1,r^2).A(l^2,r)|2', u'A(l,r)+A(l,r^1).A(l^1,r^2).A(l^2,r)>A(l,r^1).A(l^1,r^2).A(l^2,r^3).A(l^3,r)|2']

7.4. Differences between Species, ReactionRule and NetfreeModel

The functions explained above is similar, but there are some differences in the criteria.

sp1 = Species("A(b^1).A(b^1)")
sp2 = Species("A(b)")
rr1 = create_unbinding_reaction_rule(sp1, sp2, sp2, 1.0)
print(sp1.count(sp1))
print([rr.as_string() for rr in rr1.generate([sp1])])

2
[u'A(b^1).A(b^1)>A(b)+A(b)|1']

Though Species.count suggests two different ways for matching (left-right and right-left), ReactionRule.generate returns only one ReactionRule because the order doesn’t affect the product.

sp1 = Species("A(b^1).B(b^1)")
rr1 = create_unbinding_reaction_rule(
    sp1, Species("A(b)"), Species("B(b)"), 1.0)
sp2 = Species("A(b^1,c^2).A(b^3,c^2).B(b^1).B(b^3)")
print(sp1.count(sp2))
print([rr.as_string() for rr in rr1.generate([sp2])])

2
[u'A(b^1,c^2).A(b^3,c^2).B(b^1).B(b^3)>A(b,c^1).A(b^2,c^1).B(b^2)+B(b)|1', u'A(b^1,c^2).A(b^3,c^2).B(b^1).B(b^3)>A(b^1,c^2).A(b,c^2).B(b^1)+B(b)|1']

In this case, ReactionRule.generate works similarly with Species.count. However, Netfree.query_reaction_rules returns only one ReationRule with higher kinetic rate:

m1 = NetfreeModel()
m1.add_reaction_rule(rr1)
print([rr.as_string() for rr in m1.query_reaction_rules(sp2)])

[u'A(b^1,c^2).A(b^3,c^2).B(b^1).B(b^3)>A(b,c^1).A(b^2,c^1).B(b^2)+B(b)|2']

NetfreeModel.query_reaction_rules checks if each ReactionRule generated is the same with others, and summalizes it if possible.

As explaned above, ReactionRule.generate matters the order of Species, but Netfree.query_reaction_rules does not.

sp1 = Species("A(b)")
sp2 = Species("B(b)")
rr1 = create_binding_reaction_rule(sp1, sp2, Species("A(b^1).B(b^1)"), 1.0)
m1 = NetfreeModel()
m1.add_reaction_rule(rr1)
print([rr.as_string() for rr in rr1.generate([sp1, sp2])])
print([rr.as_string() for rr in m1.query_reaction_rules(sp1, sp2)])
print([rr.as_string() for rr in rr1.generate([sp2, sp1])])  # => []
print([rr.as_string() for rr in m1.query_reaction_rules(sp2, sp1)])

[u'A(b)+B(b)>A(b^1).B(b^1)|1']
[u'A(b)+B(b)>A(b^1).B(b^1)|1']
[]
[u'B(b)+A(b)>A(b^1).B(b^1)|1']

Named wildcards must be consistent in the context while nameless wildcards are not necessarily consistent.

sp1 = Species("_(b)")
sp2 = Species("_1(b)")
sp3 = Species("A(b)")
sp4 = Species("B(b)")
rr1 = create_binding_reaction_rule(sp1, sp1, Species("_(b^1)._(b^1)"), 1)
rr2 = create_binding_reaction_rule(sp2, sp2, Species("_1(b^1)._1(b^1)"), 1)
print(sp1.count(sp2))  # => 1
print(sp1.count(sp3))  # => 1
print(sp2.count(sp2))  # => 1
print(sp2.count(sp3))  # => 1
print([rr.as_string() for rr in rr1.generate([sp3, sp3])])
print([rr.as_string() for rr in rr1.generate([sp3, sp4])])
print([rr.as_string() for rr in rr2.generate([sp3, sp3])])
print([rr.as_string() for rr in rr2.generate([sp3, sp4])])  # => []

1
1
1
1
[u'A(b)+A(b)>A(b^1).A(b^1)|1']
[u'A(b)+B(b)>A(b^1).B(b^1)|1']
[u'A(b)+A(b)>A(b^1).A(b^1)|1']
[]

8. More about 1. Brief Tour of E-Cell4 Simulations

Once you read through 1. Brief Tour of E-Cell4 Simulations, it is NOT difficult to use World and Simulator. volume and {'C': 60} is equivalent of the World and solver is the Simulator below.

%matplotlib inline
from ecell4 import *

with reaction_rules():
    A + B == C | (0.01, 0.3)

y = run_simulation(10.0, {'C': 60}, volume=1.0)

Here we give you a breakdown for run_simulation. run_simulation use ODE simulator by default, so we create ODEWorld step by step.

8.1. Creating ODEWorld

You can create World like this.

w = ode.ODEWorld(Real3(1, 1, 1))

Real3 is a coordinate vector. In this example, the first argument for ODEWorld constructor is a cube. Note that you can NOT use volume for ode.ODEWorld argument, like run_simulation argument.

Now you created a cube box for simulation, next let’s throw molecules into the cube.

w = ode.ODEWorld(Real3(1, 1, 1))
w.add_molecules(Species('C'), 60)
print(w.t(), w.num_molecules(Species('C')))  # must return (0.0, 60)

(0.0, 60)

Use add_molecules to add molecules, remove_molecules to remove molecules, num_molecules to know the number of molecules. First argument for each method is the Species you want to know. You can get current time by t method. However the number of molecules in ODE solver is real number, in these _molecules functions work only for integer number. When you handle real numbers in ODE, use set_value and get_value.

8.2. How to Use Real3

Before the detail of Simulator, we explaing more about Real3.

pos = Real3(1, 2, 3)
print(pos)  # must print like <ecell4.core.Real3 object at 0x7f44e118b9c0>
print(tuple(pos))  # must print (1.0, 2.0, 3.0)

<ecell4.core.Real3 object at 0x7f05b0e6f630>
(1.0, 2.0, 3.0)

You can not print the contents in Real3 object directly. You need to convert Real3 to Python tuple or list once.

pos1 = Real3(1, 1, 1)
x, y, z = pos[0], pos[1], pos[2]
pos2 = pos1 + pos1
pos3 = pos1 * 3
pos4 = pos1 / 5
print(length(pos1))  # must print 1.73205080757
print(dot_product(pos1, pos3))  # must print 9.0

1.73205080757
9.0

You can use basic function like dot_product. Of course, you can convert Real3 to numpy array too.

import numpy
a = numpy.asarray(tuple(Real3(1, 2, 3)))
print(a)  # must print [ 1.  2.  3.]

[ 1.  2.  3.]

Integer3 represents a triplet of integers.

g = Integer3(1, 2, 3)
print(tuple(g))

(1, 2, 3)

Of course, you can also apply simple arithmetics to Integer3.

print(tuple(Integer3(1, 2, 3) + Integer3(4, 5, 6)))  # => (5, 7, 9)
print(tuple(Integer3(4, 5, 6) - Integer3(1, 2, 3)))  # => (3, 3, 3)
print(tuple(Integer3(1, 2, 3) * 2))  # => (2, 4, 6)
print(dot_product(Integer3(1, 2, 3), Integer3(4, 5, 6)))  # => 32
print(length(Integer3(1, 2, 3)))  # => 3.74165738677

(5, 7, 9)
(3, 3, 3)
(2, 4, 6)
32
3.74165738677

8.3. Creating and Running ODESimulator

You can create a Simulator with Model and World like

with reaction_rules():
    A + B > C | 0.01  # equivalent to create_binding_reaction_rule
    C > A + B | 0.3   # equivalent to create_unbinding_reaction_rule

m = get_model()

sim = ode.ODESimulator(m, w)
sim.run(10.0)

then call run method, the simulation will run. In this example the simulation runs for 10seconds.

You can check the state of the World like this.

print(w.t(), w.num_molecules(Species('C')))  # must return (10.0, 30)

(10.0, 30)

You can see that the number of the Species C decreases from 60 to 30.

World describes the state of a timepoint, so you can NOT see the transition of the simulation with the World. To obtain the time-series result, use Observer.

w = ode.ODEWorld(Real3(1, 1, 1))
w.add_molecules(Species('C'), 60)
sim = ode.ODESimulator(m, w)

obs = FixedIntervalNumberObserver(0.1, ('A', 'C'))
sim.run(10.0, obs)
print(obs.data())  # must return [[0.0, 0.0, 60.0], ..., [10.0, 29.994446899691276, 30.005553100308752]]

[[0.0, 0.0, 60.0], [0.1, 1.7722206098711988, 58.227779390128795], [0.2, 3.4860124889661757, 56.51398751103382], [0.30000000000000004, 5.1376332715496495, 54.862366728450354], [0.4, 6.724090809612153, 53.27590919038786], [0.5, 8.243129756755453, 51.75687024324456], [0.6000000000000001, 9.69320376680592, 50.3067962331941], [0.7000000000000001, 11.073435590968808, 48.92656440903121], [0.8, 12.383567691608423, 47.616432308391595], [0.9, 13.62390591657045, 46.37609408342957], [1.0, 14.795258681171735, 45.20474131882829], [1.1, 15.898873899780316, 44.10112610021971], [1.2000000000000002, 16.936375633755194, 43.06362436624483], [1.3, 17.90970211303103, 42.090297886969], [1.4000000000000001, 18.821046466966358, 41.17895353303366], [1.5, 19.67280118133671, 40.32719881866331], [1.6, 20.46750699887015, 39.53249300112988], [1.7000000000000002, 21.207806714875233, 38.792193285124796], [1.8, 21.896404094818397, 38.10359590518163], [1.9000000000000001, 22.536027939969333, 37.463972060030684], [2.0, 23.129401186565122, 36.8705988134349], [2.1, 23.679214801318086, 36.320785198681946], [2.2, 24.188106157761755, 35.81189384223828], [2.3000000000000003, 24.658641522840725, 35.34135847715931], [2.4000000000000004, 25.093302252968826, 34.9066977470312], [2.5, 25.49447428958285, 34.50552571041718], [2.6, 25.86444054777012, 34.13555945222991], [2.7, 26.205375806607968, 33.79462419339207], [2.8000000000000003, 26.51934373464207, 33.48065626535796], [2.9000000000000004, 26.80829570797557, 33.19170429202446], [3.0, 27.07407111744664, 32.92592888255339], [3.1, 27.318398885233666, 32.68160111476636], [3.2, 27.542899949227504, 32.457100050772524], [3.3000000000000003, 27.749090501388586, 32.25090949861144], [3.4000000000000004, 27.938385796523626, 32.0616142034764], [3.5, 28.112104375214862, 31.88789562478517], [3.6, 28.271472567998387, 31.728527432001645], [3.7, 28.417629170003387, 31.582370829996645], [3.8000000000000003, 28.551630196373424, 31.44836980362661], [3.9000000000000004, 28.674453642480778, 31.32554635751925], [4.0, 28.787004191633095, 31.212995808366934], [4.1000000000000005, 28.890117821767866, 31.109882178232162], [4.2, 28.984566277309003, 31.015433722691025], [4.3, 29.071061377146354, 30.928938622853675], [4.4, 29.150259141926327, 30.8497408580737], [4.5, 29.22276372627192, 30.777236273728107], [4.6000000000000005, 29.289131148912805, 30.710868851087223], [4.7, 29.349872817459094, 30.650127182540935], [4.800000000000001, 29.405458847152726, 30.594541152847302], [4.9, 29.456321176884504, 30.543678823115524], [5.0, 29.50285648638057, 30.49714351361946], [5.1000000000000005, 29.545428921493947, 30.45457107850608], [5.2, 29.58437263404594, 30.415627365954087], [5.300000000000001, 29.61999414522251, 30.38000585477752], [5.4, 29.652574540327944, 30.347425459672085], [5.5, 29.682371504475235, 30.317628495524794], [5.6000000000000005, 29.70962120751236, 30.29037879248767], [5.7, 29.734540047958276, 30.265459952041752], [5.800000000000001, 29.757326264061593, 30.242673735938435], [5.9, 29.778161421010864, 30.221838578989164], [6.0, 29.797211782455758, 30.20278821754427], [6.1000000000000005, 29.814629574218237, 30.18537042578179], [6.2, 29.8305541480645, 30.169445851935528], [6.300000000000001, 29.84511305246321, 30.15488694753682], [6.4, 29.858423017246, 30.141576982754028], [6.5, 29.87059085870597, 30.129409141294058], [6.6000000000000005, 29.881714310971407, 30.11828568902862], [6.7, 29.89188278945169, 30.10811721054834], [6.800000000000001, 29.90117809152673, 30.098821908473298], [6.9, 29.90967503947212, 30.09032496052791], [7.0, 29.917442070090726, 30.082557929909303], [7.1000000000000005, 29.92454177537786, 30.075458224622167], [7.2, 29.931031398107503, 30.068968601892525], [7.300000000000001, 29.936963286002193, 30.063036713997835], [7.4, 29.942385307810326, 30.057614692189702], [7.5, 29.947341234455514, 30.052658765544514], [7.6000000000000005, 29.951871088073982, 30.048128911926046], [7.7, 29.956011461640173, 30.043988538359855], [7.800000000000001, 29.959795811548137, 30.04020418845189], [7.9, 29.963254725453346, 30.036745274546682], [8.0, 29.966416167388665, 30.033583832611363], [8.1, 29.969305702114955, 30.030694297885073], [8.200000000000001, 29.971946700366555, 30.028053299633473], [8.3, 29.97436052665158, 30.02563947334845], [8.4, 29.9765667110567, 30.023433288943327], [8.5, 29.978583106421084, 30.021416893578944], [8.6, 29.98042603207785, 30.019573967922177], [8.700000000000001, 29.982110405343864, 30.017889594656165], [8.8, 29.983649861761148, 30.01635013823888], [8.9, 29.985056865065513, 30.014943134934516], [9.0, 29.98634280775227, 30.01365719224776], [9.1, 29.9875181030258, 30.01248189697423], [9.200000000000001, 29.988592268884133, 30.011407731115895], [9.3, 29.98957400499266, 30.010425995007367], [9.4, 29.990471262976794, 30.009528737023235], [9.5, 29.99129131068186, 30.00870868931817], [9.600000000000001, 29.992040790927835, 30.007959209072194], [9.700000000000001, 29.99272577521901, 30.007274224781018], [9.8, 29.993351812847337, 30.00664818715269], [9.9, 29.993923975779538, 30.00607602422049], [10.0, 29.994446899691276, 30.005553100308752]]

There are several types of Observers for E-Cell4. FixedIntervalNumberObserver is the simplest Observer to obtain the time-series result. As its name suggests, this Observer records the number of molecules for each time-step. The 1st argument is the time-step, the 2nd argument is the molecule types. You can check the result with data method, but there is a shortcut for this.

viz.plot_number_observer(obs)

This plots the time-series result easily.

We explained the internal of run_simulation function. When you change the World after creating the Simulator, you need to indicate it to Simulator. So do NOT forget to call sim.initialize() after that.

8.4. Switching the Solver

It is NOT difficult to switch the solver to stochastic method, as we showed run_simulation.

from ecell4 import *

with reaction_rules():
    A + B == C | (0.01, 0.3)

m = get_model()

# ode.ODEWorld -> gillespie.GillespieWorld
w = gillespie.GillespieWorld(Real3(1, 1, 1))
w.add_molecules(Species('C'), 60)

# ode.ODESimulator -> gillespie.GillespieSimulator
sim = gillespie.GillespieSimulator(m, w)
obs = FixedIntervalNumberObserver(0.1, ('A', 'C'))
sim.run(10.0, obs)

viz.plot_number_observer(obs)

World and Simulator never change the Model itself, so you can switch several Simulators for 1 Model.

9. Spatial Gillespie Method

9.1. Spaces in E-Cell4

What the space in E-Cell4 looks like?

from ecell4 import *

w1 = ode.ODEWorld(Real3(1, 1, 1))
w2 = gillespie.GillespieWorld(Real3(1, 1, 1))

We created a cube size, 1, on a side for ODEWorld and GillespieWorld. In this case the volume only matters, that is

w3 = ode.ODEWorld(Real3(2, 0.5, 1))  # is almost equivalent to 'w1'
w4 = gillespie.GillespieWorld(Real3(2, 2, 0.25))  # is almost equivalent to 'w2'

This returns the same results. Because the volume is same as 1.

This seems reasonable in homogeneous system, but the cell is NOT homogeneous. So we need to consider a space for molecular localization.

You can use several types of space and simulation methods in E-Cell4. We show an example with spatial Gillespie method here.

9.2. Spatial Gillespie Method

In E-Cell4, the Spatial Gillespie method is included in meso module. Let’s start with run_simulation like ode.

%matplotlib inline
import numpy
from ecell4 import *

with reaction_rules():
    A + B == C | (0.01, 0.3)

y = run_simulation(numpy.linspace(0, 10, 100), {'C': 60}, solver='meso')

At the steady state, the number of C is given as follows:

\[\begin{split}\frac{d\mathrm{C}}{dt}=0.01{\cdot}\frac{\mathrm{A}}{V}{\cdot}\frac{\mathrm{B}}{V}-0.3{\cdot}\frac{\mathrm{C}}{V}=0\\ 0.01\left(60-\mathrm{C}\right)^2=0.3\mathrm{C}\times V\\ \mathrm{C}=30.\end{split}\]

You will obtain almost the same result with ode or gillespie (may take longer time than ode or gillespie). This is not surprising because meso module is almost same with Gillespie unless you give additional spatial parameter.

Next we will decompose run_simulation.

from ecell4 import *

with reaction_rules():
    A + B == C | (0.01, 0.3)

m = get_model()

w = meso.MesoscopicWorld(Real3(1, 1, 1), Integer3(1, 1, 1))  # XXX: Point2
w.bind_to(m)  # XXX: Point1
w.add_molecules(Species('C'), 60)

sim = meso.MesoscopicSimulator(w)  # XXX: Point1
obs = FixedIntervalNumberObserver(0.1, ('A', 'B', 'C'))
sim.run(10, obs)

viz.plot_number_observer(obs)

This is nothing out of the ordinary one except for MesoscopicWorld and MesoscopicSimulator, but you can see some new elements.

First in w.bind_to(m) we asscociated a Model to the World. In the basic exercises before, we did NOT do this. In spatial methods, Species attributes are necessary. Do not forget to call this. After that, only the World is required to create a MesoscopicSimulator.

Next, the important difference is the second argument for MesoscopicWorld, i.e. Integer3(1, 1, 1). ODEWorld and GillespieWorld do NOT have this second argument. Before we explain this, let’s change this argument and run the simulation again.

from ecell4 import *

with reaction_rules():
    A + B == C | (0.01, 0.3)

m = get_model()

w = meso.MesoscopicWorld(Real3(1, 1, 1), Integer3(4, 4, 4))  # XXX: Point2
w.bind_to(m)  # XXX: Point1
w.add_molecules(Species('C'), 60)

sim = meso.MesoscopicSimulator(w)  # XXX: Point1
obs = FixedIntervalNumberObserver(0.1, ('A', 'B', 'C'))
sim.run(10, obs)

viz.plot_number_observer(obs)

You must have the different plot. If you increase value in the Integer3, you will have more different one.

Actually this second argument means the number of spatical partitions. meso is almost same with gillespie, but meso divides the space into cuboids (we call these cuboids subvolumes) and each subvolume has different molecular concentration by contrast gillespie has only one uniform closed space. So in the preceding example, we divided 1 cube with sides 1 into 64 (4x4x4) cubes with sides 0.25. We threw 60 C molecules into the World. Thus, each subvolume has 1 species at most.

9.3. Defining Molecular Diffusion Coefficient

Where the difference is coming from? This is because we do NOT consider molecular diffusion coefficient, although we got a space with meso. To setup diffusion coefficient, use Species attribute 'D' in the way described before (2. How to Build a Model). As shown in 1. Brief Tour of E-Cell4 Simulations, we use E-Cell4 special notation here.

with species_attributes():
    A | {'D': '1'}
    B | {'D': '1'}
    C | {'D': '1'}

    # A | B | C | {'D': '1'}  # means the same as above

get_model()

<ecell4.core.NetworkModel at 0x7ff0add53c48>

You can setup diffusion coefficient with with species_attributes(): statement. Here we set all the diffusion coefficient as 1. Let’s simulate this model again. Now you must have the almost same result with gillespie even with large Integer3 value (the simulation will takes much longer than gillespie).

How did the molecular diffusion work for the problem? Think about free diffusion (the diffusion coefficient of a Species is \(D\)) in 3D space. The unit of diffusion coefficient is the square of length divided by time like \(\mathrm{\mu m}^2/s\) or \(\mathrm{nm}^2/\mu s\).

It is known that the average of the square of point distance from time \(0\) to \(t\) is equal to \(6Dt\). Conversely the average of the time scale in a space with length scale \(l\) is about \(l^2/6D\).

In the above case, the size of each subvolume is 0.25 and the diffusion coefficient is 1. Thus the time scale is about 0.01 sec. If the molecules of the Species A and B are in the same subvolume, it takes about 1.5 sec to react, so in most cases the diffusion is faster than the reaction and the molecules move to other subvolume even dissociated in the same subvolume. The smaller \(l\), the smaller subvolume’s volume \(l^3\), so the reaction rate after dissociation is faster, and the time of the diffusion and the transition between the subvolume gets smaller too.

9.4. Molecular localization

We have used add_molecules function to add molecules to World in the same manner as ode or gillespie. Meanwhile in MesoscopicWorld, you can put in molecules according to the spatial presentation.

from ecell4 import *

w = meso.MesoscopicWorld(Real3(1, 1, 1), Integer3(3, 3, 3))
w.add_molecules(Species('A'), 120)
w.add_molecules(Species('B'), 120, Integer3(1, 1, 1))

In MesoscopicWorld, you can set the subvolume and the molecule locations by giving the third argument Integer3 to add_molecules. In the above example, the molecule type A spreads all over the space, but the molecule type B only locates in a subvolume at the center of the volume. To check this, use num_molecules function with a coordinate.

print(w.num_molecules(Species('B')))  # must print 120
print(w.num_molecules(Species('B'), Integer3(0, 0, 0)))  # must print 0
print(w.num_molecules(Species('B'), Integer3(1, 1, 1)))  # must print 120

120
0
120

Furthermore, if you have IPython Notebook environment, you can visualize the molecular localization with ecell4.viz module.

# viz.plot_world(w, radius=0.01)
viz.plot_world(w, interactive=False)

viz.plot_world function visualize the location of the molecules in IPython Notebook cell by giving the World. You can set the molecule size with radius. Now you can set the molecular localization to the World, next let’s simulate this. In the above example, we set the diffusion coefficient 1 and the World side 1, so 10 seconds is enough to stir this. After the simulation, check the result with calling viz.plot_world again.

9.5. Molecular initial location and the reaction

This is an extreme example to check how the molecular localization affects the reaction.

%matplotlib inline
from ecell4 import *

with species_attributes():
    A | B | C | {'D': '1'}

with reaction_rules():
    A + B > C | 0.01

m = get_model()
w = meso.MesoscopicWorld(Real3(10, 1, 1), Integer3(10, 1, 1))
w.bind_to(m)

This model consists only of a simple binding reaction. The World is a long x axis cuboid, and molecules are located off-center.

w.add_molecules(Species('A'), 1200, Integer3(2, 0, 0))
w.add_molecules(Species('B'), 1200, Integer3(7, 0, 0))
# viz.plot_world(w, radius=0.025)
viz.plot_world(w, interactive=False)

On a different note, there is a reason not to set Integer3(0, 0, 0) or Integer3(9, 0, 0). In E-Cell4, basically we adopt periodic boundary condition for everything. So the forementioned two subvolumes are actually adjoining.

After realizing the location expected, simulate it with MesoscopicSimulator.

sim = meso.MesoscopicSimulator(w)
obs1 = NumberObserver(('A', 'B', 'C'))  # XXX: saves the numbers after every steps
sim.run(5, obs1)
viz.plot_number_observer(obs1)

# viz.plot_world(w, radius=0.025)
viz.plot_world(w, interactive=False)

To check the effect of initial coordinates, we recommend that you locate the molecules homogeneously with meso or simulate with gillespie.

w = meso.MesoscopicWorld(Real3(10, 1, 1), Integer3(10, 1, 1))
w.bind_to(m)
w.add_molecules(Species('A'), 1200)
w.add_molecules(Species('B'), 1200)

sim = meso.MesoscopicSimulator(w)
obs2 = NumberObserver(('A', 'B', 'C'))  # XXX: saves the numbers after every steps
sim.run(5, obs2)
viz.plot_number_observer(obs1, "-", obs2, "--")

The solid line is biased case, and the dash line is non-biased. The biased reaction is obviously slow. And you may notice that the shape of time-series is also different between the solid and dash lines. This is because it takes some time for the molecule A and B to collide due to the initial separation. Actually it takes \(4^2/2(D_\mathrm{A}+D_\mathrm{B})=4\) seconds to move the initial distance between A and B (about 4).

10. Spatiocyte Simulations at Single-Molecule Resolution

We showed an example of E-Cell4 spatial representation.

Next let’s simulate the models with more detailed spatial representation called “single molecule resolution”.

%matplotlib inline
from ecell4 import *

10.1. Spatiocyte Lattice-based Method

In spatical Gillespie method, we divided the Space into smaller Space, then we diffuse the molecules in the subvolumes. However, we treated the molecules in each subvolume just as the number of the molecules, and the location of the molecules are NOT determinated.

In other words, the spatical resolution of spatical Gillespie method is equal to the side of a subvolume \(l\). To improve this resolution, we need to make the size of \(l\) small. But in this method the \(l\) must be larger than the (at least) 10 times the diameter of molecule \(R\).

How can we improve the spatical resolution to the size of the molecule? The answer is the simulation with single-molecule resolution. This method simulate the molecule not with the number of the molecules, but with the spatical reaction diffusion of each molecule.

E-Cell4 has multiple single-molecule resolution method, here we explain about Spatiocyte lattice-based method. Spatiocyte treats each molecule as hard spheres, and diffuses the molecules on hexagonal close-packed lattice.

Spatiocyte has an ID for each molecule and the position of the molecule with single-molecule resolution. For the higher spatial resolution, Spatiocyte has 100 times smaller time-step than spatical Gillespie, because the time scale of diffusion increases with the square of the distance.

Next, let’s try the Spatiocyte method.

with species_attributes():
    A | B | C | {'D': '1'}

with reaction_rules():
    A + B == C | (0.01, 0.3)

m = get_model()

w = spatiocyte.SpatiocyteWorld(Real3(1, 1, 1), 0.005)  # The second argument is 'voxel_radius'.
w.bind_to(m)
w.add_molecules(Species('C'), 60)

sim = spatiocyte.SpatiocyteSimulator(w)
obs = FixedIntervalNumberObserver(0.1, ('A', 'B', 'C'))
sim.run(10, obs)

There is a distinct difference in the second argument for SpatiocyteWorld. This is called voxel radius. Spatiocyte defines the locations of the molecules with dividing the space with molecule size, and call the minimum unit for this space as Voxel.

In most cases the size of the molecule would be good for voxel radius. In this example, we set 5 \(\mathrm{nm}\) as the radius of the molecule in the space with the side 1 \(\mathrm{\mu m}\) . It takes more time to simulate, but the result is same with ODE or Gillespie.

viz.plot_number_observer(obs)

10.2. The Diffusion Movement of Single Molecule

Next let’s simulate single molecule diffusion to check the resolution.

with species_attributes():
    A | {'D': '1'}

m = get_model()

w = spatiocyte.SpatiocyteWorld(Real3(1, 1, 1), 0.005)
w.bind_to(m)

(pid, p), suc = w.new_particle(Species('A'), Real3(0.5, 0.5, 0.5))

new_particle method tries to place a particle to a coordinate in SpatiocyteWorld. It returns the particle’s ParticleID (pid), the Particle object (p), and the boolean value (suc). If new_particle succeeds in putting the particle,suc will be True. If a particle is already placed in the coordinate, you can NOT place a particle over it and suc will be False and fail.

p contains the particle position, species type, radius, and diffusion coefficient. You can inspect the p with the particle’s ID, pid.

Let’s check p first.

pid, p = w.get_particle(pid)
print(p.species().serial())  # must print: A
print(p.radius(), p.D())  # must print: (0.005, 1.0)
print(tuple(p.position()))  # must print: (0.49806291436591293, 0.49652123150307814, 0.5)

A
(0.005, 1.0)
(0.49806291436591293, 0.49652123150307814, 0.5)

get_particle method receives a particle ID and returns the ID and particle (of cource the ID are same with the given one). You can inspect the coordinate of the particle as Real3 with position() method. It is hard to directly read the coordinate, here we printed it after converting to tuple. As you can see the tuple coodinate is slightly different from the original position given as a Real3. This is because Spatiocyte can place the molecule only on the lattice. SpatiocyteWorld places the molecule a center position of the nearest lattice for the argument Real3.

You can visualize the coordinate of the molecule with viz.plot_world method, and check the molecule in the center of the World.

viz.plot_world(w, interactive=False)
# viz.plot_world(w)

And you can use FixedIntervalTrajectoryObserver to track the trajectory of molecular diffusion process.

sim = spatiocyte.SpatiocyteSimulator(w)
obs = FixedIntervalTrajectoryObserver(0.002, (pid,))
sim.run(1, obs)
viz.plot_trajectory(obs, interactive=False)
# viz.plot_trajectory(obs)

Here we visualized the trajectory with viz.plot_trajectory method, you can also obtain it as Real3 list with data() method.

print(len(obs.data()))  # => 1
print(len(obs.data()[0]))  # => 501

1
501

data() method returns nested list. First index means the index of the particle. Second index means the index of the Real3. In this case we threw just one particle, so the first result is 1, and next 501 means time-series coordinate of the only one particle (initial coordinate and the coordinates in 1/0.002 = 500 time points).

Also you can obtain the particles in bulk with list_particles_exact method and a Species.

w.add_molecules(Species('A'), 5)

particles = w.list_particles_exact(Species('A'))
for pid, p in particles:
    print(p.species().serial(), tuple(p.position()))

(u'A', (0.7103520254071217, 0.8256108849411649, 0.88))
(u'A', (0.5062278801751902, 0.034641016151377546, 0.77))
(u'A', (0.4082482904638631, 0.7188010851410841, 0.985))
(u'A', (0.30210373494325865, 0.30599564267050167, 0.68))
(u'A', (0.28577380332470415, 0.26269437248127975, 1.0050000000000001))
(u'A', (0.563382640840131, 0.0202072594216369, 0.545))

Please remember list_particles_exact method, this method can be used for other World as well as add_molecules method.

On a different note, in Spatiocyte proper method to inspect the single molecule is list_voxels_exact, and the coordinate is described with index of voxel (not Real3).

10.3 The Diffusion Coefficient and the Second-order Reaction

The models we have addressed contains a second-order reaction. Let’s look at the relationship between this second-order reaction and the diffusion coefficient in Spatiocyte.

with species_attributes():
    A | B | C | {'D': '1'}

with reaction_rules():
    A + B > C | 1.0

m = get_model()

w = spatiocyte.SpatiocyteWorld(Real3(2, 1, 1), 0.005)
w.bind_to(m)
w.add_molecules(Species('A'), 120)
w.add_molecules(Species('B'), 120)

obs = FixedIntervalNumberObserver(0.005, ('A', 'B', 'C'))
sim = spatiocyte.SpatiocyteSimulator(w)
sim.run(1.0, obs)

odew = ode.ODEWorld(Real3(2, 1, 1))
# odew.bind_to(m)
odew.add_molecules(Species('A'), 120)
odew.add_molecules(Species('B'), 120)

odeobs = FixedIntervalNumberObserver(0.005, ('A', 'B', 'C'))
odesim = ode.ODESimulator(m, odew)
odesim.run(1.0, odeobs)

viz.plot_number_observer(obs, "-", odeobs, "--")

Although we used faster kinetic constant than before, the result is same. But by contrast with ODE simulation, you can find the difference between them (solid line is spatiocyte, dash line is ode). Is this fault of Spatiocyte? (No) Actually Spatiocyte reaction rate couldn’t be faster, while ODE reaction rate can be faster infinitely.

This is caused by the difference between the definition of reaction rate constant in ODE solver and single molecule simulation method. The former is called “macroscopic” or “effective” reaction rate constant, the latter is called “microscopic” or “intrinsic” reaction rate constant.

The “macroscopic” rate represents the reaction rate in mixed molecular state, meanwhile “microscopic” rate represents the reactivity in molecule collision. So in “microscopic” perspective, the first thing molecules need to react is collision. In Spatiocyte, however, you make this “microscopic” rate faster, you can NOT make the actual reaction rate faster than collision rate. This is called “diffusion-limited” condition. This is similar to what the molecules coordinated disproportionately need time to react.

It is known that there is a relationship between this macroscopic rate constant \(k_\mathrm{on}\) and microscopic rate constant \(k_a\) in 3D space.

\(\frac{1}{k_\mathrm{on}}=\frac{1}{k_a}+\frac{1}{4\pi RD_\mathrm{tot}},\)

where \(R\) is the sum of two molecule’s radius in collision, \(D_\mathrm{tot}\) is the sum of diffusion coefficients.

In the case of the above Jupyter Notebook cell, \(k_D=4\pi RD_\mathrm{tot}\) is almost 0.25 and “microscopic” rate constant is 1.0. So the “macroscopic” rate constant is almost 0.2. (However unless you specify the configuration for Spatiocyte, the second order reaction rate must be slower than \(3\sqrt{2} RD\), and the dissociation constant \(k_D\) is also \(3\sqrt{2} RD\).) The single molecule simulation method can separate molecular “diffusion” and “reaction” in accurate manner contrary to ODE or Gillespie method supposed well mixed system (that is diffusion coefficient is infinite). However if the microscopic rate constant \(k_D\) is small enough, the macroscopic rate constant is almost equal to microscopic one (reaction late-limit).

10.4. The Structure in the Spatiocyte Method

Next we explain a way to create a structure like cell membrane. Although The structure feature in E-Cell4 is still in development, Spatiocyte supports the structure on some level. Let’s look a sphere structure as an example.

To restrict the molecular diffusion inside of the sphere, first we create it.

with species_attributes():
    A | {'D': '1', 'location': 'C'}

m = get_model()

w = spatiocyte.SpatiocyteWorld(Real3(1, 1, 1), 0.005)
w.bind_to(m)
sph = Sphere(Real3(0.5, 0.5, 0.5), 0.45)
print(w.add_structure(Species('C'), sph))  # will print 539805

539805

Visualize the state of the World.

viz.plot_world(w, interactive=False)
# viz.plot_world(w)

The Sphere class first argument is the center of the sphere, and second argument is the radius. Then we created a Species named C and added it inside the Sphere. The structure in the Spatiocyte method is described by filling the space with the Voxel. In the example above, the Voxels in the sphere are occupied with Species named C.

You can see those distribution with viz.plot_world as above. (However, the number of the species is too large to visualize all. So we plot only a part of it, but actually the sphere is fully occupied with the Species.)

Next we create Species moving inside this sphere. To that end we give location attribute to the Species. After that, you just throw-in molecules to the World with add_molecules function.

w.add_molecules(Species('A'), 120)

viz.plot_world(w, species_list=('A',), interactive=False)  # visualize A-molecules only
# viz.plot_world(w, species_list=('A',))  # visualize A-molecules only

Now we restricted the trajectories of Species A on the structure of Species C, and add_molecules works like that. As a note, you need to create the structure before add_molecule.

We can use FixedIntervalTrajectoryObserver to check the restriction of the diffusion area.

pid_list = [pid for pid, p in w.list_particles(Species('A'))[: 10]]
obs = FixedIntervalTrajectoryObserver(1e-3, pid_list)
sim = spatiocyte.SpatiocyteSimulator(w)
sim.run(1, obs)
viz.plot_trajectory(obs, interactive=False)
# viz.plot_trajectory(obs)

pid_list is a list of the first 10 ParticleIDs of A molecules. The trajectories are colored by this 10 species. Certainly the trajectories are restricted in the sphere.

10.5 The structure and the reaction

At the end, we explain about molecular translocation among the structures.

A Species without location attribute is not an member of any structures. In the example above, if you do NOT write location attribute with Species A, A is placed outside of the sphere.

Next let’s create a planar surface structure. To create a surface, we need to use three Real3, those are original point (origin) and two axis vector (unit0, unit1): ps = PlanarSurface(origin, unit0, unit1).

Suppose Species A on the surface, ps, and a normal Species B.

with species_attributes():
    A | {'D': '0.1', 'location': 'M'}
    B | {'D': '1'}

m  = get_model()

w = spatiocyte.SpatiocyteWorld(Real3(1, 1, 1))
w.bind_to(m)

origin = Real3(0, 0, 0.5)
unit0 = Real3(1, 0, 0)
unit1 = Real3(0, 1, 0)
w.add_structure(
    Species('M'), PlanarSurface(origin, unit0, unit1))  # Create a structure first

w.add_molecules(Species('B'), 480)  # Throw-in B-molecules

viz.plot_world(w, species_list=('B', 'M'), interactive=False)
# viz.plot_world(w, species_list=('B', 'M'))

It might be hard to see them, but actually the Species B are placed only not on a surface. Then how can we make absorbed this Species B to a surface M and synthesize a Species A?

with species_attributes():
    A | {'D': '0.1', 'location': 'M'}
    B | {'D': '1'}

with reaction_rules():
    B + M == A | (1.0, 1.5)

m = get_model()

This means that a Species B becomes A when B collides with a structure M. On the other hand, a species A dissociates from the structure, and becomes M and B on as the reverse reaction direction.

Now you can simulate this model with a structure.

w.bind_to(m)

sim = spatiocyte.SpatiocyteSimulator(w)
obs = NumberObserver(('A', 'B'))
sim.run(2, obs)

viz.plot_number_observer(obs)
viz.plot_world(w, species_list=('A', 'B'), interactive=False)
# viz.plot_world(w, species_list=('A', 'B'))

In the dissociation from a structure, you can skip to write the structure. Thus, A > B just means the same as A > B + M in the above. But in the binding, you can NOT. Because it is impossible to create A from B with no M around there. By contrast the species A wherever on the sphere M can create the species B. The first order reaction occurs in either presence or absence of the structure. But, in the case of the binding, the second order reaction turns into the first order reaction and the meaning of rate constant also changes if you ignore M in the left-hand side.

Examples

Attractors

%matplotlib inline
import numpy
from ecell4 import *
util.decorator.ENABLE_RATELAW = True

Rössler attractor

a, b, c = 0.2, 0.2, 5.7

with reaction_rules():
    ~x > x | (-y - z)
    ~y > y | (x + a * y)
    ~z > z | (b + z * (x - c))

run_simulation(numpy.linspace(0, 200, 4001), y0={'x': 1.0}, return_type='nyaplot',
               opt_args={'x': 'x', 'y': ('y', 'z'), 'to_png': True})

Modified Chua chaotic attractor

alpha, beta = 10.82, 14.286
a, b, d = 1.3, 0.1, 0.2

with reaction_rules():
    h = -b * sin(numpy.pi * x / (2 * a) + d)
    ~x > x | (alpha * (y - h))
    ~y > y | (x - y + z)
    ~z > z | (-beta * y)

run_simulation(numpy.linspace(0, 250, 5001),
               y0={'x': 0, 'y': 0.49899, 'z': 0.2}, return_type='nyaplot',
               opt_args={'x': 'x', 'y': 'y', 'to_png': True})

Lorenz system

p, r, b = 10, 28, 8.0 / 3

with reaction_rules():
    ~x > x | (-p * x + p * y)
    ~y > y | (-x * z + r * x - y)
    ~z > z | (x * y - b * z)

run_simulation(numpy.linspace(0, 25, 2501),
               y0={'x': 10, 'y': 1, 'z': 1}, return_type='nyaplot',
               opt_args={'x': 'x', 'y': ('y', 'z'), 'to_png': True})

Tamari attractor

a = 1.013
b = -0.021
c = 0.019
d = 0.96
e = 0
f = 0.01
g = 1
u = 0.05
i = 0.05

with reaction_rules():
    ~x > x | ((x - a * y) * cos(z) - b * y * sin(z))
    ~y > y | ((x + c * y) * sin(z) + d * y * cos(z))
    ~z > z | (e + f * z + g * a * atan((1 - u) / (1 - i) * x * y))

run_simulation(numpy.linspace(0, 800, 8001),
               y0={'x': 0.9, 'y': 1, 'z': 1}, return_type='nyaplot',
               opt_args={'x': 'x', 'y': ('y', 'z'), 'to_png': True})

Moore-Spiegel attractor

T, R = 6, 20
with reaction_rules():
    ~x > x | y
    ~y > y | z
    ~z > z | (-z - (T - R + R * x * x) * y - T * x)

run_simulation(numpy.linspace(0, 100, 5001),
               y0={'x': 1, 'y': 0, 'z': 0}, return_type='nyaplot',
               opt_args={'x': 'x', 'y': 'y', 'to_png': True})

Drosophila Circadian Clock

This is a model of the oscillating Drosophila period protein(PER). This model is based on the model introduced in the following publication.

• 1. Goldbeter, “A model for circadian oscillations in the Drosophila period protein(PER)”, Proc R Soc Lond B Biol Sci, Vol.261:319-324, Sep 1995.

%matplotlib inline
import numpy
from ecell4 import *
util.decorator.ENABLE_RATELAW = True

with reaction_rules():
    ~M > M | 0.76 / (1 + Pn ** 3)
    M > ~M | 0.65 * M / (0.5 + M)
    ~P0 > P0 | 0.38 * M
    P0 == P1 | (3.2 * P0 / (2 + P0), 1.58 * P1 / (2 + P1))
    P1 == P2 | (5 * P1 / (2 + P1), 2.5 * P2 / (2 + P2))
    P2 == Pn | (1.9, 1.3)
    P2 > ~P2 | 0.95 * P2 / (0.2 + P2)

y0 = {"M": 3.61328202E-01, "Pn": 6.21367E-01, "P0": 3.01106835E-01, "P1": 3.01106835E-01, "P2": 3.61328202E-01}
obs = run_simulation(numpy.linspace(0, 100, 400), y0, return_type='observer')

# viz.plot_number_observer(obs, interactive=True)
viz.plot_number_observer(obs)

# viz.plot_number_observer(obs, x="Pn", y=("M", "P0", "P1", "P2"), interactive=True)
viz.plot_number_observer(obs, x="Pn", y=("M", "P0", "P1", "P2"))

Dual Phosphorylation Cycle

from ecell4.core import *
from ecell4.util import *

@species_attributes
def attrgen(radius, D):
    K | {"radius": radius, "D": D}
    Kp | {"radius": radius, "D": D}
    Kpp | {"radius": radius, "D": D}
    KK | {"radius": radius, "D": D}
    PP | {"radius": radius, "D": D}
    K_KK | {"radius": radius, "D": D}
    Kp_KK | {"radius": radius, "D": D}
    Kpp_PP | {"radius": radius, "D": D}
    Kp_PP | {"radius": radius, "D": D}

@reaction_rules
def rulegen(kon1, koff1, kcat1, kon2, koff2, kcat2):
    (K + KK == K_KK | (kon1, koff1)
        > Kp + KK | kcat1
        == Kp_KK | (kon2, koff2)
        > Kpp + KK | kcat2)

    (Kpp + PP == Kpp_PP | (kon1, koff1)
        > Kp + PP | kcat1
        == Kp_PP | (kon2, koff2)
        > K + PP | kcat2)

m = NetworkModel()

for i, sp in enumerate(attrgen("0.0025", "1")):
    print(i, sp.serial(), sp.get_attribute("radius"), sp.get_attribute("D"))
    m.add_species_attribute(sp)

(0, u'K', u'0.0025', u'1')
(1, u'Kp', u'0.0025', u'1')
(2, u'Kpp', u'0.0025', u'1')
(3, u'KK', u'0.0025', u'1')
(4, u'PP', u'0.0025', u'1')
(5, u'K_KK', u'0.0025', u'1')
(6, u'Kp_KK', u'0.0025', u'1')
(7, u'Kpp_PP', u'0.0025', u'1')
(8, u'Kp_PP', u'0.0025', u'1')

ka1, kd1, kcat1 = 0.04483455086786913, 1.35, 1.5
ka2, kd2, kcat2 = 0.09299017957780264, 1.73, 15.0

for i, rr in enumerate(rulegen(ka1, kd2, kcat1, ka2, kd2, kcat2)):
    reactants, products, k = rr.reactants(), rr.products(), rr.k()
    print(i, rr.as_string())
    m.add_reaction_rule(rr)

(0, u'K+KK>K_KK|0.0448346')
(1, u'K_KK>K+KK|1.73')
(2, u'K_KK>Kp+KK|1.5')
(3, u'Kp+KK>Kp_KK|0.0929902')
(4, u'Kp_KK>Kp+KK|1.73')
(5, u'Kp_KK>Kpp+KK|15')
(6, u'Kpp+PP>Kpp_PP|0.0448346')
(7, u'Kpp_PP>Kpp+PP|1.73')
(8, u'Kpp_PP>Kp+PP|1.5')
(9, u'Kp+PP>Kp_PP|0.0929902')
(10, u'Kp_PP>Kp+PP|1.73')
(11, u'Kp_PP>K+PP|15')

from ecell4.gillespie import GillespieWorld as world_type, GillespieSimulator as simulator_type
# from ecell4.ode import ODEWorld as world_type, ODESimulator as simulator_type

w = world_type(Real3(1, 1, 1))
# w.bind_to(m)
w.add_molecules(Species("K"), 120)
w.add_molecules(Species("KK"), 30)
w.add_molecules(Species("PP"), 30)
sim = simulator_type(m, w)

obs = FixedIntervalNumberObserver(1.0, ["K", "K_KK", "Kp", "Kp_KK", "Kp_PP", "Kpp", "Kpp_PP"])
sim.run(60, [obs])

%matplotlib inline
import matplotlib.pylab as plt
from numpy import array

data = array(obs.data()).T
plt.plot(data[0], data[1] + data[2], "r-", label="K")
plt.plot(data[0], data[3] + data[4] + data[5], "g--", label="Kp")
plt.plot(data[0], data[6] + data[7], "b:", label="Kpp")
plt.xlabel("Time")
plt.ylabel("Number Of Molecules")
plt.xlim(data[0][0], data[0][-1])
plt.legend(loc="best", shadow=True)
plt.show()

Simple EGFR model

• http://bionetgen.org/index.php/Simple_EGFR_model

• M.L. Blinov, J.R. Faeder, B. Goldstein, W.S. Hlavacek, “A network model of early events in epidermal growth factor receptor signaling that accounts for combinatorial complexity.”, Biosystems, 83(2-3), 136-151, 2006.

%matplotlib inline
from ecell4 import *

NA = 6.02e23  # Avogadro's number (molecules/mol)
f = 1  # Fraction of the cell to simulate
Vo = f * 1.0e-10  # Extracellular volume=1/cell_density (L)
V = f * 3.0e-12  # Cytoplasmic volume (L)

EGF_init = 20 * 1e-9 * NA * Vo  # Initial amount of ligand (20 nM) converted to copies per cell

# Initial amounts of cellular components (copies per cell)
EGFR_init = f * 1.8e5
Grb2_init = f * 1.5e5
Sos1_init = f * 6.2e4

# Rate constants
# Divide by NA*V to convert bimolecular rate constants
# from /M/sec to /(molecule/cell)/sec
kp1 = 9.0e7 / (NA * Vo)  # ligand-monomer binding
km1 = 0.06  # ligand-monomer dissociation
kp2 = 1.0e7 / (NA * V)  # aggregation of bound monomers
km2 = 0.1  # dissociation of bound monomers
kp3 = 0.5  # dimer transphosphorylation
km3 = 4.505  # dimer dephosphorylation
kp4 = 1.5e6 / (NA * V)  # binding of Grb2 to receptor
km4 = 0.05  # dissociation of Grb2 from receptor
kp5 = 1.0e7 / (NA * V)  # binding of Grb2 to Sos1
km5 = 0.06  # dissociation of Grb2 from Sos1
deg = 0.01  # degradation of receptor dimers

with reaction_rules():
  # R1: Ligand-receptor binding
  EGFR(L, CR1) + EGF(R) == EGFR(L^1, CR1).EGF(R^1) | (kp1, km1)

  # R2: Receptor-aggregation
  EGFR(L^_, CR1) + EGFR(L^_, CR1) == EGFR(L^_,CR1^1).EGFR(L^_,CR1^1) | (kp2, km2)

  # R3: Transphosphorylation of EGFR by RTK
  EGFR(CR1^_, Y1068=U) > EGFR(CR1^_, Y1068=P) | kp3

  # R4: Dephosphorylation
  EGFR(Y1068=P) > EGFR(Y1068=U) | km3

  # R5: Grb2 binding to pY1068
  EGFR(Y1068=P) + Grb2(SH2) == EGFR(Y1068=P^1).Grb2(SH2^1) | (kp4, km4)

  # R6: Grb2 binding to Sos1
  Grb2(SH3) + Sos1(PxxP) == Grb2(SH3^1).Sos1(PxxP^1) | (kp5, km5)

  # R7: Receptor dimer internalization/degradation
  (EGF(R^1).EGF(R^2).EGFR(L^1,CR1^3).EGFR(L^2,CR1^3) > ~EmptySet | deg
       | _policy(ReactionRule.STRICT | ReactionRule.DESTROY))

m = get_model(is_netfree=True, effective=True)

y0 = {"EGF(R)": EGF_init, "EGFR(L, CR1, Y1068=U)": EGFR_init, "Grb2(SH2, SH3)": Grb2_init, "Sos1(PxxP)": Sos1_init}

newm = m.expand([Species(serial) for serial in y0.keys()])

print("{} species and {} reactions were generated.".format(len(newm.list_species()), len(newm.reaction_rules())))

for i, sp in enumerate(newm.list_species()):
    print("{}: {}".format(i + 1, sp.serial()))

for i, rr in enumerate(newm.reaction_rules()):
    print("{}: {}".format(i + 1, rr.as_string()))

22 species and 86 reactions were generated.
1: EGF(R)
2: EGF(R^1).EGFR(CR1,L^1,Y1068=P)
3: EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3)
4: EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3^3).Sos1(PxxP^3)
5: EGF(R^1).EGFR(CR1,L^1,Y1068=U)
6: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P).EGF(R^3)
7: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3)
8: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3^5).Sos1(PxxP^5)
9: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=U).EGF(R^3)
10: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3)
11: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3^6).Sos1(PxxP^6)
12: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3^6).Sos1(PxxP^6).Grb2(SH2^3,SH3^7).Sos1(PxxP^7)
13: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3)
14: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3^5).Sos1(PxxP^5)
15: EGF(R^1).EGFR(CR1^2,L^1,Y1068=U).EGFR(CR1^2,L^3,Y1068=U).EGF(R^3)
16: EGFR(CR1,L,Y1068=P)
17: EGFR(CR1,L,Y1068=P^1).Grb2(SH2^1,SH3)
18: EGFR(CR1,L,Y1068=P^1).Grb2(SH2^1,SH3^2).Sos1(PxxP^2)
19: EGFR(CR1,L,Y1068=U)
20: Grb2(SH2,SH3)
21: Grb2(SH2,SH3^1).Sos1(PxxP^1)
22: Sos1(PxxP)
1: EGF(R)+EGFR(CR1,L,Y1068=U)>EGF(R^1).EGFR(CR1,L^1,Y1068=U)|1.49502e-06
2: Grb2(SH2,SH3)+Sos1(PxxP)>Grb2(SH2,SH3^1).Sos1(PxxP^1)|5.5371e-06
3: EGF(R^1).EGFR(CR1,L^1,Y1068=U)>EGF(R)+EGFR(CR1,L,Y1068=U)|0.06
4: EGF(R^1).EGFR(CR1,L^1,Y1068=U)+EGF(R^1).EGFR(CR1,L^1,Y1068=U)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=U).EGFR(CR1^2,L^3,Y1068=U).EGF(R^3)|2.76855e-06
5: Grb2(SH2,SH3^1).Sos1(PxxP^1)>Grb2(SH2,SH3)+Sos1(PxxP)|0.06
6: EGF(R^1).EGFR(CR1^2,L^1,Y1068=U).EGFR(CR1^2,L^3,Y1068=U).EGF(R^3)>EGF(R^1).EGFR(CR1,L^1,Y1068=U)+EGF(R^1).EGFR(CR1,L^1,Y1068=U)|0.1
7: EGF(R^1).EGFR(CR1^2,L^1,Y1068=U).EGFR(CR1^2,L^3,Y1068=U).EGF(R^3)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=U).EGF(R^3)|1
8: EGF(R^1).EGFR(CR1^2,L^1,Y1068=U).EGFR(CR1^2,L^3,Y1068=U).EGF(R^3)>|0.01
9: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=U).EGF(R^3)>EGF(R^1).EGFR(CR1,L^1,Y1068=P)+EGF(R^1).EGFR(CR1,L^1,Y1068=U)|0.1
10: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=U).EGF(R^3)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P).EGF(R^3)|0.5
11: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=U).EGF(R^3)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=U).EGFR(CR1^2,L^3,Y1068=U).EGF(R^3)|4.505
12: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=U).EGF(R^3)+Grb2(SH2,SH3^1).Sos1(PxxP^1)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3^5).Sos1(PxxP^5)|8.30565e-07
13: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=U).EGF(R^3)+Grb2(SH2,SH3)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3)|8.30565e-07
14: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=U).EGF(R^3)>|0.01
15: EGF(R^1).EGFR(CR1,L^1,Y1068=P)>EGF(R)+EGFR(CR1,L,Y1068=P)|0.06
16: EGF(R^1).EGFR(CR1,L^1,Y1068=P)+EGF(R^1).EGFR(CR1,L^1,Y1068=P)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P).EGF(R^3)|2.76855e-06
17: EGF(R^1).EGFR(CR1,L^1,Y1068=P)+EGF(R^1).EGFR(CR1,L^1,Y1068=U)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=U).EGF(R^3)|5.5371e-06
18: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P).EGF(R^3)>EGF(R^1).EGFR(CR1,L^1,Y1068=P)+EGF(R^1).EGFR(CR1,L^1,Y1068=P)|0.1
19: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3^5).Sos1(PxxP^5)>EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3^3).Sos1(PxxP^3)+EGF(R^1).EGFR(CR1,L^1,Y1068=U)|0.1
20: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3)>EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3)+EGF(R^1).EGFR(CR1,L^1,Y1068=U)|0.1
21: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3^5).Sos1(PxxP^5)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3^5).Sos1(PxxP^5)|0.5
22: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3)|0.5
23: EGF(R^1).EGFR(CR1,L^1,Y1068=P)>EGF(R^1).EGFR(CR1,L^1,Y1068=U)|4.505
24: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P).EGF(R^3)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=U).EGF(R^3)|9.01
25: EGF(R^1).EGFR(CR1,L^1,Y1068=P)+Grb2(SH2,SH3^1).Sos1(PxxP^1)>EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3^3).Sos1(PxxP^3)|8.30565e-07
26: EGF(R^1).EGFR(CR1,L^1,Y1068=P)+Grb2(SH2,SH3)>EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3)|8.30565e-07
27: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P).EGF(R^3)+Grb2(SH2,SH3^1).Sos1(PxxP^1)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3^5).Sos1(PxxP^5)|1.66113e-06
28: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P).EGF(R^3)+Grb2(SH2,SH3)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3)|1.66113e-06
29: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3^5).Sos1(PxxP^5)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=U).EGF(R^3)+Grb2(SH2,SH3^1).Sos1(PxxP^1)|0.05
30: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=U).EGF(R^3)+Grb2(SH2,SH3)|0.05
31: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3)+Sos1(PxxP)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3^5).Sos1(PxxP^5)|5.5371e-06
32: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3^5).Sos1(PxxP^5)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3)+Sos1(PxxP)|0.06
33: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P).EGF(R^3)>|0.01
34: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3^5).Sos1(PxxP^5)>|0.01
35: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3)>|0.01
36: EGF(R)+EGFR(CR1,L,Y1068=P)>EGF(R^1).EGFR(CR1,L^1,Y1068=P)|1.49502e-06
37: EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3^3).Sos1(PxxP^3)>EGF(R)+EGFR(CR1,L,Y1068=P^1).Grb2(SH2^1,SH3^2).Sos1(PxxP^2)|0.06
38: EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3)>EGF(R)+EGFR(CR1,L,Y1068=P^1).Grb2(SH2^1,SH3)|0.06
39: EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3^3).Sos1(PxxP^3)+EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3^3).Sos1(PxxP^3)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3^6).Sos1(PxxP^6).Grb2(SH2^3,SH3^7).Sos1(PxxP^7)|2.76855e-06
40: EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3)+EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3^3).Sos1(PxxP^3)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3^6).Sos1(PxxP^6)|5.5371e-06
41: EGF(R^1).EGFR(CR1,L^1,Y1068=P)+EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3^3).Sos1(PxxP^3)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3^5).Sos1(PxxP^5)|5.5371e-06
42: EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3^3).Sos1(PxxP^3)+EGF(R^1).EGFR(CR1,L^1,Y1068=U)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3^5).Sos1(PxxP^5)|5.5371e-06
43: EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3)+EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3)|2.76855e-06
44: EGF(R^1).EGFR(CR1,L^1,Y1068=P)+EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3)|5.5371e-06
45: EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3)+EGF(R^1).EGFR(CR1,L^1,Y1068=U)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3)|5.5371e-06
46: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3^5).Sos1(PxxP^5)>EGF(R^1).EGFR(CR1,L^1,Y1068=P)+EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3^3).Sos1(PxxP^3)|0.1
47: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3)>EGF(R^1).EGFR(CR1,L^1,Y1068=P)+EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3)|0.1
48: EGFR(CR1,L,Y1068=P)>EGFR(CR1,L,Y1068=U)|4.505
49: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3^5).Sos1(PxxP^5)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3^5).Sos1(PxxP^5)|4.505
50: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=U).EGF(R^4).Grb2(SH2^3,SH3)|4.505
51: EGFR(CR1,L,Y1068=P)+Grb2(SH2,SH3^1).Sos1(PxxP^1)>EGFR(CR1,L,Y1068=P^1).Grb2(SH2^1,SH3^2).Sos1(PxxP^2)|8.30565e-07
52: EGFR(CR1,L,Y1068=P)+Grb2(SH2,SH3)>EGFR(CR1,L,Y1068=P^1).Grb2(SH2^1,SH3)|8.30565e-07
53: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3^5).Sos1(PxxP^5)+Grb2(SH2,SH3^1).Sos1(PxxP^1)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3^6).Sos1(PxxP^6).Grb2(SH2^3,SH3^7).Sos1(PxxP^7)|8.30565e-07
54: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3^5).Sos1(PxxP^5)+Grb2(SH2,SH3)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3^6).Sos1(PxxP^6)|8.30565e-07
55: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3)+Grb2(SH2,SH3^1).Sos1(PxxP^1)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3^6).Sos1(PxxP^6)|8.30565e-07
56: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3)+Grb2(SH2,SH3)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3)|8.30565e-07
57: EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3^3).Sos1(PxxP^3)>EGF(R^1).EGFR(CR1,L^1,Y1068=P)+Grb2(SH2,SH3^1).Sos1(PxxP^1)|0.05
58: EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3)>EGF(R^1).EGFR(CR1,L^1,Y1068=P)+Grb2(SH2,SH3)|0.05
59: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3^5).Sos1(PxxP^5)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P).EGF(R^3)+Grb2(SH2,SH3^1).Sos1(PxxP^1)|0.05
60: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P).EGF(R^3)+Grb2(SH2,SH3)|0.05
61: EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3)+Sos1(PxxP)>EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3^3).Sos1(PxxP^3)|5.5371e-06
62: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3)+Sos1(PxxP)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3^5).Sos1(PxxP^5)|5.5371e-06
63: EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3^3).Sos1(PxxP^3)>EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3)+Sos1(PxxP)|0.06
64: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3^5).Sos1(PxxP^5)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3)+Sos1(PxxP)|0.06
65: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3^5).Sos1(PxxP^5)>|0.01
66: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3)>|0.01
67: EGF(R)+EGFR(CR1,L,Y1068=P^1).Grb2(SH2^1,SH3^2).Sos1(PxxP^2)>EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3^3).Sos1(PxxP^3)|1.49502e-06
68: EGF(R)+EGFR(CR1,L,Y1068=P^1).Grb2(SH2^1,SH3)>EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3)|1.49502e-06
69: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3^6).Sos1(PxxP^6).Grb2(SH2^3,SH3^7).Sos1(PxxP^7)>EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3^3).Sos1(PxxP^3)+EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3^3).Sos1(PxxP^3)|0.1
70: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3^6).Sos1(PxxP^6)>EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3)+EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3^3).Sos1(PxxP^3)|0.1
71: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3)>EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3)+EGF(R^1).EGFR(CR1,L^1,Y1068=P^2).Grb2(SH2^2,SH3)|0.1
72: EGFR(CR1,L,Y1068=P^1).Grb2(SH2^1,SH3^2).Sos1(PxxP^2)>EGFR(CR1,L,Y1068=P)+Grb2(SH2,SH3^1).Sos1(PxxP^1)|0.05
73: EGFR(CR1,L,Y1068=P^1).Grb2(SH2^1,SH3)>EGFR(CR1,L,Y1068=P)+Grb2(SH2,SH3)|0.05
74: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3^6).Sos1(PxxP^6).Grb2(SH2^3,SH3^7).Sos1(PxxP^7)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3^5).Sos1(PxxP^5)+Grb2(SH2,SH3^1).Sos1(PxxP^1)|0.1
75: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3^6).Sos1(PxxP^6)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3)+Grb2(SH2,SH3^1).Sos1(PxxP^1)|0.05
76: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3^6).Sos1(PxxP^6)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3^5).Sos1(PxxP^5)+Grb2(SH2,SH3)|0.05
77: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P).EGFR(CR1^2,L^3,Y1068=P^4).EGF(R^3).Grb2(SH2^4,SH3)+Grb2(SH2,SH3)|0.1
78: EGFR(CR1,L,Y1068=P^1).Grb2(SH2^1,SH3)+Sos1(PxxP)>EGFR(CR1,L,Y1068=P^1).Grb2(SH2^1,SH3^2).Sos1(PxxP^2)|5.5371e-06
79: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3^6).Sos1(PxxP^6)+Sos1(PxxP)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3^6).Sos1(PxxP^6).Grb2(SH2^3,SH3^7).Sos1(PxxP^7)|5.5371e-06
80: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3)+Sos1(PxxP)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3^6).Sos1(PxxP^6)|1.10742e-05
81: EGFR(CR1,L,Y1068=P^1).Grb2(SH2^1,SH3^2).Sos1(PxxP^2)>EGFR(CR1,L,Y1068=P^1).Grb2(SH2^1,SH3)+Sos1(PxxP)|0.06
82: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3^6).Sos1(PxxP^6).Grb2(SH2^3,SH3^7).Sos1(PxxP^7)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3^6).Sos1(PxxP^6)+Sos1(PxxP)|0.12
83: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3^6).Sos1(PxxP^6)>EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3)+Sos1(PxxP)|0.06
84: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3^6).Sos1(PxxP^6).Grb2(SH2^3,SH3^7).Sos1(PxxP^7)>|0.01
85: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3^6).Sos1(PxxP^6)>|0.01
86: EGF(R^1).EGFR(CR1^2,L^1,Y1068=P^3).EGFR(CR1^2,L^4,Y1068=P^5).EGF(R^4).Grb2(SH2^5,SH3).Grb2(SH2^3,SH3)>|0.01

species_list = ["EGFR",
                "EGF(R)",
                "EGFR(CR1^_)",
                "EGFR(Y1068=P^_0)",
                "Grb2(SH2, SH3^1).Sos1(PxxP^1)",
                "EGFR(Y1068^1).Grb2(SH2^1, SH3^2).Sos1(PxxP^2)"]
run_simulation(120, model=newm, y0=y0, species_list=species_list,
               opt_kwargs={'interactive': True, 'to_png': True})

A Simple Model of the Glycolysis of Human Erythrocytes

This is a model for the glycolysis of human erythrocytes which takes into account ATP-synthesis and -consumption. This model is based on the model introduced in the following publication.

• Rapoport, T.A. and Heinrich, R. (1975) “Mathematical analysis of multienzyme systems. I. Modelling of the glycolysis of human erythrocytes.”, Biosystems., 7, 1, 120-129.

• Heinrich, R. and Rapoport, T.A. (1975) “Mathematical analysis of multienzyme systems. II. Steady state and transient control.”, Biosystems., 7, 1, 130-136.

%matplotlib inline
from ecell4 import *
util.decorator.ENABLE_RATELAW = True

with reaction_rules():
    2 * ATP > 2 * A13P2G + 2 * ADP | (3.2 * ATP / (1.0 + (ATP / 1.0) ** 4.0))
    A13P2G > A23P2G | 1500
    A23P2G > PEP | 0.15
    A13P2G + ADP > PEP + ATP | 1.57e+4
    PEP + ADP > ATP | 559
    AMP + ATP > 2 * ADP | (1.0 * (AMP * ATP - 2.0 * ADP * ADP))
    ATP > ADP | 1.46

y0 = {"A13P2G": 0.0005082, "A23P2G": 5.0834, "PEP": 0.020502,
      "AMP": 0.080139, "ADP": 0.2190, "ATP": 1.196867}

run_simulation(100, y0=y0)

Hodgkin-Huxley Model

• A.L. Hodgkin, A.F. Huxley, “A quantitative description of membrane current and its application to conduction and excitation in nerve”, J. Physiol., 117, 500-544, 1952.

%matplotlib inline
import numpy as np
from ecell4 import *

Q10 = 3.0
GNa = 120.0 # mS/cm^2
GK = 36.0 # mS/cm^2
gL = 0.3 # mS/cm^2
EL = -64.387 # mV
ENa = 40.0 # mV
EK = -87.0 # mV
Cm = 1.0 # uF/cm^2

T = 6.3 # degrees C
Iext = 10.0 # nA

with reaction_rules():
    Q = Q10 ** ((T - 6.3) / 10)

    alpha_m = -0.1 * (Vm + 50) / (exp(-(Vm + 50) / 10) - 1)
    beta_m = 4 * exp(-(Vm + 75) / 18)
    ~m > m | Q * (alpha_m * (1 - m) - beta_m * m)

    alpha_h = 0.07 * exp(-(Vm + 75) / 20)
    beta_h = 1.0 / (exp(-(Vm + 45) / 10) + 1)
    ~h > h | Q * (alpha_h * (1 - h) - beta_h * h)

    alpha_n = -0.01 * (Vm + 65) / (exp(-(Vm + 65) / 10) - 1)
    beta_n = 0.125 * exp(-(Vm + 75) / 80)
    ~n > n | Q * (alpha_n * (1 - n) - beta_n * n)

    gNa = (m ** 3) * h * GNa
    INa = gNa * (Vm - ENa)
    gK = (n ** 4) * GK
    IK = gK * (Vm - EK)
    IL = gL * (Vm - EL)
    ~Vm > Vm | (Iext - (IL + INa + IK)) / Cm

hhm = get_model()

for rr in hhm.reaction_rules():
    print(rr.as_string())

Vm>m+Vm|(1.0*((((-0.1*(Vm+50))/(exp((-(Vm+50)/10))-1))*(1-m))-(4*exp((-(Vm+75)/18))*m)))
Vm>h+Vm|(1.0*((0.07*exp((-(Vm+75)/20))*(1-h))-((1.0/(exp((-(Vm+45)/10))+1))*h)))
Vm>n+Vm|(1.0*((((-0.01*(Vm+65))/(exp((-(Vm+65)/10))-1))*(1-n))-(0.125*exp((-(Vm+75)/80))*n)))
m+h+n>Vm+m+h+n|((10.0-((0.3*(Vm--64.387))+((m**3)*h*120.0*(Vm-40.0))+((n**4)*36.0*(Vm--87.0))))/1.0)

run_simulation(np.linspace(0, 100, 1001), model=hhm, y0={'Vm': -75}, species_list=['Vm'])

FitzHugh–Nagumo Model

• 18. FitzHugh, “Mathematical models of threshold phenomena in the nerve membrane.”, Bull. Math. Biophysics, 17:257—278, 1955.

a = 0.7
b = 0.8
c = 12.5
Iext = 0.5

with reaction_rules():
    ~u > u | -v + u - (u ** 3) / 3 + Iext
    ~v > v | (u - b * v + a) / c

fnm = get_model()

for rr in fnm.reaction_rules():
    print(rr.as_string())

v>u+v|(((-v+u)-((u**3)/3))+0.5)
u>v+u|(((u-(0.8*v))+0.7)/12.5)

run_simulation(np.linspace(0, 200, 501), model=fnm)

run_simulation(np.linspace(0, 200, 501), model=fnm, # return_type='nyaplot',
               opt_kwargs={'x': 'u', 'y': ['v']})

Lotka-Volterra 2D

The Original Model in Ordinary Differential Equations

%matplotlib inline
from ecell4 import *

alpha = 1

with reaction_rules():
    ~u > u | u * (1 - v)
    ~v > v | alpha * v * (u - 1)

m = get_model()

run_simulation(15, {'u': 1.25, 'v': 0.66}, model=m)

The Modified Model Decomposed into Elementary Reactions

alpha = 1

with species_attributes():
    u | {'D': '0.1'}
    v | {'D': '0.1'}

with reaction_rules():
    u > u + u | 1.0
    u + v > v | 1.0

    u + v > u + v2 | alpha
    v2 > v + v | alpha * 10000.0
    v > ~v | alpha

m = get_model()

run_simulation(40, {'u': 1.25 * 1600, 'v': 0.66 * 1600}, volume=1600, model=m)

run_simulation(40, {'u': 1.25 * 1600, 'v': 0.66 * 1600}, volume=1600, model=m, solver='gillespie')

A Lotka-Volterra-like Model in 2D

rng = GSLRandomNumberGenerator()
rng.seed(0)

w = meso.MesoscopicWorld(Real3(40, 40, 1), Integer3(160, 160, 1), rng)
w.bind_to(m)

V = w.volume()
print(V)

1600.0

w.add_molecules(Species("u"), int(1.25 * V))
w.add_molecules(Species("v"), int(0.66 * V))

sim = meso.MesoscopicSimulator(w)
obs1 = FixedIntervalNumberObserver(0.1, ('u', 'v', 'v2'))
obs2 = FixedIntervalHDF5Observer(2, "test%03d.h5")

sim.run(100, (obs1, obs2))

viz.plot_number_observer(obs1)

viz.plot_world(w, radius=0.2)

viz.plot_movie_with_attractive_mpl(
    obs2, linewidth=0, noaxis=True, figsize=6, whratio=1.4,
    angle=(-90, 90, 6), bitrate='10M')

# from zipfile import ZipFile
# with ZipFile('test.zip', 'w') as myzip:
#     for i in range(obs2.num_steps()):
#         myzip.write('test{:03d}.h5'.format(i))

MinDE System with Mesoscopic Simulator

Fange D, Elf J (2006) Noise-Induced Min Phenotypes in E. coli. PLoS Comput Biol 2(6): e80. doi:10.1371/journal.pcbi.0020080

%matplotlib inline
from ecell4 import *

Declaring Species and ReactionRules:

with species_attributes():
    D | DE | {"D": "0.01", "location": "M"}
    D_ADP | D_ATP | E | {"D": "2.5", "location": "C"}

with reaction_rules():
    D_ATP + M > D | 0.0125
    D_ATP + D > D + D | 9e+6 * (1e+15 / N_A)
    D + E > DE | 5.58e+7 * (1e+15 / N_A)
    DE > D_ADP + E | 0.7
    D_ADP > D_ATP | 0.5

m = get_model()

Make a World. The second argument, 0.05, means its subvolume length:

w = meso.MesoscopicWorld(Real3(4.6, 1.1, 1.1), 0.05)
w.bind_to(m)

Make a structures. Species C is for cytoplasm, and M is for membrane:

rod = Rod(3.5, 0.55, w.edge_lengths() * 0.5)
w.add_structure(Species("C"), rod)
w.add_structure(Species("M"), rod.surface())

Throw-in molecules:

w.add_molecules(Species("D_ATP"), 2001)
w.add_molecules(Species("D_ADP"), 2001)
w.add_molecules(Species("E"), 1040)

Run a simulation for 120 seconds. Two Observers below are for logging. obs1 logs only the number of molecules, and obs2 does a whole state of the World.

sim = meso.MesoscopicSimulator(w)
obs1 = FixedIntervalNumberObserver(0.1, [sp.serial() for sp in m.list_species()])
obs2 = FixedIntervalHDF5Observer(1.0, 'minde%03d.h5')

from ecell4.util.progressbar import progressbar

duration = 120
progressbar(sim, timeout=1).run(duration, (obs1, obs2))

  [############################]    100.0%  Elapsed:  00:28:11 ETA:  00:00:00

Visualize the final state of the World:

viz.plot_world(w, radius=0.01, species_list=('D', 'DE'))

Plot a time course of the number of molecules:

viz.plot_number_observer(obs1)

viz.plot_movie_with_matplotlib(obs2, species_list=('D', 'DE'))

MinDE System with Spatiocyte Simulator

%matplotlib inline
from ecell4 import *

Declaring Species and ReactionRules:

with species_attributes():
    cytoplasm | {'radius': '1e-8', 'D': '0'}
    MinDatp | MinDadp | {'radius': '1e-8', 'D': '16e-12', 'location': 'cytoplasm'}
    MinEE_C | {'radius': '1e-8', 'D': '10e-12', 'location': 'cytoplasm'}
    membrane | {'radius': '1e-8', 'D': '0', 'location': 'cytoplasm'}
    MinD | MinEE_M | MinDEE | MinDEED | {'radius': '1e-8', 'D': '0.02e-12', 'location': 'membrane'}

with reaction_rules():
    membrane + MinDatp > MinD | 2.2e-8
    MinD + MinDatp > MinD + MinD | 3e-20
    MinD + MinEE_C > MinDEE | 5e-19
    MinDEE > MinEE_M + MinDadp | 1
    MinDadp > MinDatp | 5
    MinDEE + MinD > MinDEED | 5e-15
    MinDEED > MinDEE + MinDadp | 1
    MinEE_M > MinEE_C | 0.83

m = get_model()

Make a World.

f = spatiocyte.SpatiocyteFactory(1e-8)
w = f.create_world(Real3(4.6e-6, 1.1e-6, 1.1e-6))
w.bind_to(m)

Make a Structures.

rod = Rod(3.5e-6, 0.51e-6, w.edge_lengths() * 0.5)
w.add_structure(Species('cytoplasm'), rod)
w.add_structure(Species('membrane'), rod.surface())

47500

Throw-in molecules.

w.add_molecules(Species('MinDadp'), 1300)
w.add_molecules(Species('MinDEE'), 700)

Run a simulation for 240 seconds.

sim = f.create_simulator(m, w)

# from functools import reduce
# alpha = reduce(lambda x, y: min(x, sim.calculate_alpha(y)), m.reaction_rules())
# sim.set_alpha(alpha)

from ecell4.util.progressbar import progressbar

obs1 = FixedIntervalNumberObserver(0.1, ('MinDatp', 'MinDadp', 'MinEE_C', 'MinD', 'MinEE_M', 'MinDEE', 'MinDEED'))

obs2 = FixedIntervalHDF5Observer(1.0, "minde%03d.h5")

duration = 240

progressbar(sim, timeout=1).run(duration, (obs1, obs2))

  [############################]    100.0%  Elapsed:  01:04:40 ETA:  00:00:00

viz.plot_number_observer(obs1)

viz.plot_movie_with_matplotlib([spatiocyte.SpatiocyteWorld("minde%03d.h5" % i) for i in range(obs2.num_steps())], species_list=('MinD', 'MinEE_M', 'MinDEE', 'MinDEED'))

viz.plot_world(spatiocyte.SpatiocyteWorld("minde240.h5"), species_list=('MinD', 'MinEE_M', 'MinDEE', 'MinDEED'))

Simple Equilibrium

This is a simple equilibrium model as an example. Here, we explain how to model and run a simulation without using decorators (species_attributes and reaction_rules) and run_simulation method.

%matplotlib inline
from ecell4 import *

Choose one module from a list of methods supported on E-Cell4.

# f = gillespie.GillespieFactory
# f = ode.ODEFactory()
# f = spatiocyte.SpatiocyteFactory()
# f = bd.BDFactory()
# f = meso.MesoscopicFactory()
f = egfrd.EGFRDFactory()

Set up parameters:

L, N, kd, U, D, radius = 1.0, 60, 0.1, 0.5, "1", "0.01"
volume = L * L * L
ka = kd * volume * (1 - U) / (U * U * N)

sp1, sp2, sp3 = Species("A", radius, D), Species("B", radius, D), Species("A_B", radius, D)
rr1, rr2 = create_binding_reaction_rule(sp1, sp2, sp3, ka), create_unbinding_reaction_rule(sp3, sp1, sp2, kd)

Create a model:

m = NetworkModel()
m.add_species_attribute(sp1)
m.add_species_attribute(sp2)
m.add_species_attribute(sp3)
m.add_reaction_rule(rr1)
m.add_reaction_rule(rr2)

Create a world and simulator:

w = f.create_world(Real3(L, L, L))
w.bind_to(m)
w.add_molecules(Species("A"), N)
w.add_molecules(Species("B"), N)

sim = f.create_simulator(w)
sim.set_dt(1e-3) #XXX: This is too large to get the accurate result with BDSimulator.

Run a simulation:

next_time, dt = 0.0, 0.05
data = [(w.t(), w.num_molecules(sp1), w.num_molecules(sp2), w.num_molecules(sp3))]
for i in range(100):
    next_time += dt
    while (sim.step(next_time)): pass
    data.append((w.t(), w.num_molecules(sp1), w.num_molecules(sp2), w.num_molecules(sp3)))

Plot with Matplotlib:

import matplotlib.pylab as plt
from numpy import array

data = array(data)
plt.plot(data.T[0], data.T[1], "r-", label=sp1.serial())
plt.plot(data.T[0], data.T[2], "g--", label=sp2.serial())
plt.plot(data.T[0], data.T[3], "b:", label=sp3.serial())
plt.xlabel("Time")
plt.ylabel("Number Of Molecules")
plt.xlim(data.T[0][0], data.T[0][-1])
plt.legend(loc="best", shadow=True)
plt.show()

See also Reversible and Reversible (Diffusion-limited) in the Tests section for more detailed comparisons between methods.

Tyson1991

This model is described in the article:

• J.J. Tyson, “Modeling the cell division cycle: cdc2 and cyclin interactions.”, Proc. Natl. Acad. Sci. U.S.A., 88(16), 7328-32, 1991.

Abstract: The proteins cdc2 and cyclin form a heterodimer (maturation promoting factor) that controls the major events of the cell cycle. A mathematical model for the interactions of cdc2 and cyclin is constructed. Simulation and analysis of the model show that the control system can operate in three modes: as a steady state with high maturation promoting factor activity, as a spontaneous oscillator, or as an excitable switch. We associate the steady state with metaphase arrest in unfertilized eggs, the spontaneous oscillations with rapid division cycles in early embryos, and the excitable switch with growth-controlled division cycles typical of nonembryonic cells.

%matplotlib inline
from ecell4 import *

with reaction_rules():
    YT = Y + YP + M + pM
    CT = C2 + CP + M + pM

    ~Y > Y | 0.015 / CT
    Y > ~Y | 0.0 * Y
    CP + Y > pM | 200.0 * CP * Y / CT
    pM > M | pM * (0.018 + 180 * ((M / CT) ** 2))
    M > pM | 0.0 * M
    M > C2 + YP | 1.0 * M
    YP > ~YP | 0.6 * YP
    C2 > CP | 1000000.0 * C2
    CP > C2 | 1000.0 * CP

m = get_model()

for rr in m.reaction_rules():
    print(rr.as_string())

C2+CP+M+pM>Y+C2+CP+M+pM|(0.015/(C2+CP+M+pM))
Y>|(0.0*Y)
CP+Y+C2+M>pM+C2+M|((200.0*CP*Y)/(C2+CP+M+pM))
pM+C2+CP>M+C2+CP|(pM*(0.018+(180*((M/(C2+CP+M+pM))**2))))
M>pM|(0.0*M)
M>C2+YP|(1.0*M)
YP>|(0.6*YP)
C2>CP|(1000000.0*C2)
CP>C2|(1000.0*CP)

run_simulation(100.0, model=m, y0={'CP': 0.75, 'pM': 0.25})

API

E-Cell4 core API

A submodule of ecell4_base

class ecell4_base.core.AABB

Bases: ecell4_base.core.Shape

Methods

dimension()
distance()
is_inside()
lower()
surface()
upper()

distance()

lower()

surface()

upper()

class ecell4_base.core.AffineTransformation

Bases: ecell4_base.core.Shape

Methods

dimension()
first()
is_inside()
rescale()
root()
second()
shift()
surface()
third()
translate()
xroll()
yroll()
zroll()

first()

rescale()

root()

second()

shift()

surface()

third()

translate()

xroll()

yroll()

zroll()

class ecell4_base.core.CSVObserver

Bases: ecell4_base.core.Observer

Methods

filename()
log()
next_time()
num_steps()
reset()
set_formatter()
set_header()

filename()

log()

set_formatter()

set_header()

class ecell4_base.core.Complement

Bases: ecell4_base.core.Shape

Methods

another()
dimension()
is_inside()
one()
surface()

another()

one()

surface()

class ecell4_base.core.Cylinder

Bases: ecell4_base.core.Shape

Methods

axis()
center()
dimension()
distance()
half_height()
is_inside()
surface()

axis()

center()

distance()

half_height()

surface()

class ecell4_base.core.CylindricalSurface

Bases: ecell4_base.core.Shape

Methods

axis()
center()
dimension()
distance()
half_height()
inside()
is_inside()
radius()

axis()

center()

distance()

half_height()

inside()

radius()

class ecell4_base.core.FixedIntervalCSVObserver

Bases: ecell4_base.core.Observer

Methods

filename()
log()
next_time()
num_steps()
reset()
set_formatter()
set_header()

filename()

log()

set_formatter()

set_header()

class ecell4_base.core.FixedIntervalHDF5Observer

Bases: ecell4_base.core.Observer

Methods

filename()	Overloaded function.
next_time()
num_steps()
prefix()
reset()

filename()

Overloaded function.

1. filename(self: ecell4_base.core.FixedIntervalHDF5Observer) -> str

2. filename(self: ecell4_base.core.FixedIntervalHDF5Observer, arg0: int) -> str

prefix()

class ecell4_base.core.FixedIntervalNumberObserver

Bases: ecell4_base.core.Observer

Methods

data()
next_time()
num_steps()
reset()
save()
targets()

data()

save()

targets()

class ecell4_base.core.FixedIntervalPythonHooker

Bases: ecell4_base.core.Observer

Methods

next_time()
num_steps()
reset()

class ecell4_base.core.FixedIntervalTrackingObserver

Bases: ecell4_base.core.Observer

Methods

data()
next_time()
num_steps()
num_tracers()
reset()
t()

data()

num_tracers()

t()

class ecell4_base.core.FixedIntervalTrajectoryObserver

Bases: ecell4_base.core.Observer

Methods

data()
next_time()
num_steps()
num_tracers()
reset()
t()

data()

num_tracers()

t()

class ecell4_base.core.GSLRandomNumberGenerator

Bases: ecell4_base.core.RandomNumberGenerator

Methods

binomial()
gaussian()
load()
save()
seed()	Overloaded function.
uniform()	Overloaded function.
uniform_int()

class ecell4_base.core.Integer3

Bases: pybind11_builtins.pybind11_object

Attributes

col

layer

row

col

layer

row

class ecell4_base.core.MeshSurface

Bases: ecell4_base.core.Shape

Methods

dimension()
edge_lengths()
filename()
is_inside()

edge_lengths()

filename()

class ecell4_base.core.Model

Bases: pybind11_builtins.pybind11_object

Methods

add_reaction_rule()
add_reaction_rules()
add_species_attribute()
add_species_attributes()
apply_species_attributes()
expand()	Overloaded function.
has_reaction_rule()
has_species_attribute()
list_species()
num_reaction_rules()
query_reaction_rules()	Overloaded function.
reaction_rules()
remove_reaction_rule()
remove_species_attribute()
species_attributes()
update_species_attribute()

add_reaction_rule()

add_reaction_rules()

add_species_attribute()

add_species_attributes()

apply_species_attributes()

expand()

Overloaded function.

1. expand(self: ecell4_base.core.Model, arg0: List[ecell4_base.core.Species], arg1: int, arg2: Dict[ecell4_base.core.Species, int]) -> ecell4_base.core.Model

2. expand(self: ecell4_base.core.Model, arg0: List[ecell4_base.core.Species], arg1: int) -> ecell4_base.core.Model

3. expand(self: ecell4_base.core.Model, arg0: List[ecell4_base.core.Species]) -> ecell4_base.core.Model

has_reaction_rule()

has_species_attribute()

list_species()

num_reaction_rules()

query_reaction_rules()

Overloaded function.

1. query_reaction_rules(self: ecell4_base.core.Model, arg0: ecell4_base.core.Species) -> List[ecell4_base.core.ReactionRule]

2. query_reaction_rules(self: ecell4_base.core.Model, arg0: ecell4_base.core.Species, arg1: ecell4_base.core.Species) -> List[ecell4_base.core.ReactionRule]

reaction_rules()

remove_reaction_rule()

remove_species_attribute()

species_attributes()

update_species_attribute()

class ecell4_base.core.NetfreeModel

Bases: ecell4_base.core.Model

Methods

add_reaction_rule()
add_reaction_rules()
add_species_attribute()
add_species_attributes()
apply_species_attributes()
effective()
expand()	Overloaded function.
has_reaction_rule()
has_species_attribute()
list_species()
num_reaction_rules()
query_reaction_rules()	Overloaded function.
reaction_rules()
remove_reaction_rule()
remove_species_attribute()
set_effective()
species_attributes()
update_species_attribute()

effective()

set_effective()

class ecell4_base.core.NetworkModel

Bases: ecell4_base.core.Model

Methods

add_reaction_rule()
add_reaction_rules()
add_species_attribute()
add_species_attributes()
apply_species_attributes()
expand()	Overloaded function.
has_reaction_rule()
has_species_attribute()
list_species()
num_reaction_rules()
query_reaction_rules()	Overloaded function.
reaction_rules()
remove_reaction_rule()
remove_species_attribute()
species_attributes()
update_species_attribute()

class ecell4_base.core.NumberObserver

Bases: ecell4_base.core.Observer

Methods

data()
next_time()
num_steps()
reset()
save()
targets()

data()

save()

targets()

class ecell4_base.core.Observer

Bases: pybind11_builtins.pybind11_object

Methods

next_time()
num_steps()
reset()

next_time()

num_steps()

reset()

class ecell4_base.core.Particle

Bases: pybind11_builtins.pybind11_object

Methods

D()
position()
radius()
species()

D()

position()

radius()

species()

class ecell4_base.core.ParticleID

Bases: pybind11_builtins.pybind11_object

Methods

lot()
serial()

lot()

serial()

class ecell4_base.core.ParticleVoxel

Bases: pybind11_builtins.pybind11_object

Methods

D()
coordinate()
loc()
radius()
species()

D()

coordinate()

loc()

radius()

species()

class ecell4_base.core.PlanarSurface

Bases: ecell4_base.core.Shape

Methods

dimension()
e0()
e1()
is_inside()
normal()
origin()

e0()

e1()

normal()

origin()

ecell4_base.core.Quantity

alias of ecell4_base.core.Quantity_Real

class ecell4_base.core.Quantity_Integer

Bases: pybind11_builtins.pybind11_object

Attributes

magnitude

units

magnitude

units

class ecell4_base.core.Quantity_Real

Bases: pybind11_builtins.pybind11_object

Attributes

magnitude

units

magnitude

units

class ecell4_base.core.RandomNumberGenerator

Bases: pybind11_builtins.pybind11_object

Methods

binomial()
gaussian()
load()
save()
seed()	Overloaded function.
uniform()	Overloaded function.
uniform_int()

binomial()

gaussian()

load()

save()

seed()

Overloaded function.

1. seed(self: ecell4_base.core.RandomNumberGenerator) -> None

2. seed(self: ecell4_base.core.RandomNumberGenerator, arg0: int) -> None

uniform()

Overloaded function.

1. uniform(self: ecell4_base.core.RandomNumberGenerator, arg0: float, arg1: float) -> float

2. uniform(self: ecell4_base.core.RandomNumberGenerator, arg0: float, arg1: float) -> float

uniform_int()

class ecell4_base.core.ReactionRule

Bases: pybind11_builtins.pybind11_object

Methods

add_product()
add_reactant()
as_string()
count()
generate()
get_descriptor()
get_k()
has_descriptor()
k()
policy()
products()
reactants()
reset_descriptor()
set_descriptor()
set_k()	Overloaded function.
set_policy()

add_product()

add_reactant()

as_string()

count()

generate()

get_descriptor()

get_k()

has_descriptor()

k()

policy()

products()

reactants()

reset_descriptor()

set_descriptor()

set_k()

Overloaded function.

1. set_k(self: ecell4_base.core.ReactionRule, arg0: float) -> None

2. set_k(self: ecell4_base.core.ReactionRule, arg0: ecell4_base.core.Quantity_Real) -> None

set_policy()

class ecell4_base.core.ReactionRuleDescriptor

Bases: pybind11_builtins.pybind11_object

Methods

product_coefficients()
propensity()
reactant_coefficients()
set_product_coefficient()
set_product_coefficients()
set_reactant_coefficient()
set_reactant_coefficients()

product_coefficients()

propensity()

reactant_coefficients()

set_product_coefficient()

set_product_coefficients()

set_reactant_coefficient()

set_reactant_coefficients()

class ecell4_base.core.ReactionRuleDescriptorMassAction

Bases: ecell4_base.core.ReactionRuleDescriptor

Methods

get_k()
k()
product_coefficients()
propensity()
reactant_coefficients()
set_k()	Overloaded function.
set_product_coefficient()
set_product_coefficients()
set_reactant_coefficient()
set_reactant_coefficients()

get_k()

k()

set_k()

Overloaded function.

1. set_k(self: ecell4_base.core.ReactionRuleDescriptorMassAction, arg0: float) -> None

2. set_k(self: ecell4_base.core.ReactionRuleDescriptorMassAction, arg0: ecell4_base.core.Quantity_Real) -> None

class ecell4_base.core.ReactionRuleDescriptorPyfunc

Bases: ecell4_base.core.ReactionRuleDescriptor

Methods

as_string()
get()
product_coefficients()
propensity()
reactant_coefficients()
set_name()
set_product_coefficient()
set_product_coefficients()
set_reactant_coefficient()
set_reactant_coefficients()

as_string()

get()

set_name()

class ecell4_base.core.ReactionRulePolicy

Bases: pybind11_builtins.pybind11_object

Members:

STRICT

IMPLICIT

DESTROY

Attributes

name

(self: handle) -> str

DESTROY = ReactionRulePolicy.DESTROY

IMPLICIT = ReactionRulePolicy.IMPLICIT

STRICT = ReactionRulePolicy.STRICT

name

(self: handle) -> str

class ecell4_base.core.Real3

Bases: pybind11_builtins.pybind11_object

class ecell4_base.core.Rod

Bases: ecell4_base.core.Shape

Methods

dimension()
distance()
is_inside()
length()
origin()
radius()
shift()
surface()

distance()

length()

origin()

radius()

shift()

surface()

class ecell4_base.core.RodSurface

Bases: ecell4_base.core.Shape

Methods

dimension()
distance()
is_inside()
length()
origin()
radius()
shift()

distance()

length()

origin()

radius()

shift()

class ecell4_base.core.Shape

Bases: pybind11_builtins.pybind11_object

Methods

dimension()
is_inside()

dimension()

is_inside()

class ecell4_base.core.Simulator

Bases: pybind11_builtins.pybind11_object

Methods

check_reaction()
dt()
initialize()
next_time()
num_steps()
set_dt()
step()	Overloaded function.
t()

check_reaction()

dt()

initialize()

next_time()

num_steps()

set_dt()

step()

Overloaded function.

1. step(self: ecell4_base.core.Simulator) -> None

2. step(self: ecell4_base.core.Simulator, arg0: float) -> bool

t()

class ecell4_base.core.Species

Bases: pybind11_builtins.pybind11_object

Methods

D()
add_unit()
count()
dimension()
get_attribute()
has_attribute()
list_attributes()
location()
radius()
remove_attribute()
serial()
set_attribute()	Overloaded function.
units()

D()

add_unit()

count()

dimension()

get_attribute()

has_attribute()

list_attributes()

location()

radius()

remove_attribute()

serial()

set_attribute()

Overloaded function.

1. set_attribute(self: ecell4_base.core.Species, arg0: str, arg1: str) -> None

2. set_attribute(self: ecell4_base.core.Species, arg0: str, arg1: str) -> None

3. set_attribute(self: ecell4_base.core.Species, arg0: str, arg1: float) -> None

4. set_attribute(self: ecell4_base.core.Species, arg0: str, arg1: int) -> None

5. set_attribute(self: ecell4_base.core.Species, arg0: str, arg1: ecell4_base.core.Quantity_Real) -> None

6. set_attribute(self: ecell4_base.core.Species, arg0: str, arg1: ecell4_base.core.Quantity_Integer) -> None

units()

class ecell4_base.core.Sphere

Bases: ecell4_base.core.Shape

Methods

center()
dimension()
distance()
is_inside()
radius()
surface()

center()

distance()

radius()

surface()

class ecell4_base.core.SphericalSurface

Bases: ecell4_base.core.Shape

Methods

center()
dimension()
distance()
inside()
is_inside()
radius()

center()

distance()

inside()

radius()

class ecell4_base.core.Surface

Bases: ecell4_base.core.Shape

Methods

dimension()
is_inside()
root()

root()

class ecell4_base.core.TimeoutObserver

Bases: ecell4_base.core.Observer

Methods

accumulation()
duration()
interval()
next_time()
num_steps()
reset()

accumulation()

duration()

interval()

class ecell4_base.core.TimingNumberObserver

Bases: ecell4_base.core.Observer

Methods

data()
next_time()
num_steps()
reset()
save()
targets()

data()

save()

targets()

class ecell4_base.core.TimingTrajectoryObserver

Bases: ecell4_base.core.Observer

Methods

data()
next_time()
num_steps()
num_tracers()
reset()
t()

data()

num_tracers()

t()

class ecell4_base.core.Union

Bases: ecell4_base.core.Shape

Methods

another()
dimension()
is_inside()
one()
surface()

another()

one()

surface()

class ecell4_base.core.UnitSpecies

Bases: pybind11_builtins.pybind11_object

Methods

add_site()
deserialize()
name()
serial()

add_site()

deserialize()

name()

serial()

class ecell4_base.core.WorldInterface

Bases: pybind11_builtins.pybind11_object

Methods

edge_lengths()
get_particle()
get_value()
get_value_exact()
has_particle()
has_species()
list_particles()	Overloaded function.
list_particles_exact()
list_species()
load()
num_molecules()
num_molecules_exact()
num_particles()	Overloaded function.
num_particles_exact()
save()
set_t()
t()
volume()

edge_lengths()

get_particle()

get_value()

get_value_exact()

has_particle()

has_species()

list_particles()

Overloaded function.

1. list_particles(self: ecell4_base.core.WorldInterface) -> List[Tuple[ecell4_base.core.ParticleID, ecell4_base.core.Particle]]

2. list_particles(self: ecell4_base.core.WorldInterface, arg0: ecell4_base.core.Species) -> List[Tuple[ecell4_base.core.ParticleID, ecell4_base.core.Particle]]

list_particles_exact()

list_species()

load()

num_molecules()

num_molecules_exact()

num_particles()

Overloaded function.

1. num_particles(self: ecell4_base.core.WorldInterface) -> int

2. num_particles(self: ecell4_base.core.WorldInterface, arg0: ecell4_base.core.Species) -> int

num_particles_exact()

save()

set_t()

t()

volume()

ecell4_base.core.cbrt()

ecell4_base.core.count_species_matches()

ecell4_base.core.create_binding_reaction_rule()

ecell4_base.core.create_degradation_reaction_rule()

ecell4_base.core.create_synthesis_reaction_rule()

ecell4_base.core.create_unbinding_reaction_rule()

ecell4_base.core.create_unimolecular_reaction_rule()

ecell4_base.core.create_x_plane()

ecell4_base.core.create_y_plane()

ecell4_base.core.create_z_plane()

ecell4_base.core.cross_product()

ecell4_base.core.dot_product()

Overloaded function.

1. dot_product(arg0: ecell4_base.core.Real3, arg1: ecell4_base.core.Real3) -> float

2. dot_product(arg0: ecell4_base.core.Integer3, arg1: ecell4_base.core.Integer3) -> int

ecell4_base.core.format_species()

ecell4_base.core.integer3_abs()

ecell4_base.core.integer3_add()

ecell4_base.core.integer3_dot_product()

ecell4_base.core.integer3_length()

ecell4_base.core.integer3_length_sq()

ecell4_base.core.integer3_multiply()

ecell4_base.core.integer3_subtract()

ecell4_base.core.length()

Overloaded function.

1. length(arg0: ecell4_base.core.Real3) -> float

2. length(arg0: ecell4_base.core.Integer3) -> float

ecell4_base.core.length_sq()

Overloaded function.

1. length_sq(arg0: ecell4_base.core.Real3) -> float

2. length_sq(arg0: ecell4_base.core.Integer3) -> int

ecell4_base.core.load_version_information()

ecell4_base.core.ones()

ecell4_base.core.real3_abs()

ecell4_base.core.real3_add()

ecell4_base.core.real3_divide()

ecell4_base.core.real3_dot_product()

ecell4_base.core.real3_length()

ecell4_base.core.real3_length_sq()

ecell4_base.core.real3_multiply()

ecell4_base.core.real3_subtract()

ecell4_base.core.unitx()

ecell4_base.core.unity()

ecell4_base.core.unitz()

E-Cell4 gillespie API

A submodule of ecell4_base

ecell4_base.gillespie.Factory

alias of ecell4_base.gillespie.GillespieFactory

class ecell4_base.gillespie.GillespieFactory

Bases: pybind11_builtins.pybind11_object

Methods

rng()
simulator()	Overloaded function.
world()	Overloaded function.

rng()

simulator()

Overloaded function.

1. simulator(self: ecell4_base.gillespie.GillespieFactory, world: ecell4::gillespie::GillespieWorld) -> ecell4::gillespie::GillespieSimulator

2. simulator(self: ecell4_base.gillespie.GillespieFactory, world: ecell4::gillespie::GillespieWorld, model: ecell4_base.core.Model) -> ecell4::gillespie::GillespieSimulator

world()

Overloaded function.

1. world(self: ecell4_base.gillespie.GillespieFactory, edge_lengths: ecell4_base.core.Real3 = <ecell4_base.core.Real3 object at 0x7fad072ee180>) -> ecell4::gillespie::GillespieWorld

2. world(self: ecell4_base.gillespie.GillespieFactory, volume: float) -> ecell4::gillespie::GillespieWorld

3. world(self: ecell4_base.gillespie.GillespieFactory, filename: str) -> ecell4::gillespie::GillespieWorld

4. world(self: ecell4_base.gillespie.GillespieFactory, model: ecell4_base.core.Model) -> ecell4::gillespie::GillespieWorld

class ecell4_base.gillespie.GillespieSimulator

Bases: ecell4_base.core.Simulator

Methods

check_reaction()
dt()
initialize()
last_reactions()
model()
next_time()
num_steps()
run()	Overloaded function.
set_dt()
set_t()
step()	Overloaded function.
t()
world()

last_reactions()

model()

run()

Overloaded function.

1. run(self: ecell4_base.gillespie.GillespieSimulator, duration: float, is_dirty: bool = True) -> None

2. run(self: ecell4_base.gillespie.GillespieSimulator, duration: float, observer: ecell4_base.core.Observer, is_dirty: bool = True) -> None

3. run(self: ecell4_base.gillespie.GillespieSimulator, duration: float, observers: List[ecell4_base.core.Observer], is_dirty: bool = True) -> None

set_t()

world()

class ecell4_base.gillespie.GillespieWorld

Bases: ecell4_base.core.WorldInterface

Methods

add_molecules()	Overloaded function.
bind_to()
edge_lengths()
get_particle()
get_value()
get_value_exact()
has_particle()
has_species()
list_particles()	Overloaded function.
list_particles_exact()
list_species()
load()
new_particle()	Overloaded function.
num_molecules()
num_molecules_exact()
num_particles()	Overloaded function.
num_particles_exact()
remove_molecules()
rng()
save()
set_t()
set_value()
t()
volume()

add_molecules()

Overloaded function.

1. add_molecules(self: ecell4_base.gillespie.GillespieWorld, arg0: ecell4_base.core.Species, arg1: int) -> None

2. add_molecules(self: ecell4_base.gillespie.GillespieWorld, arg0: ecell4_base.core.Species, arg1: int, arg2: ecell4_base.core.Shape) -> None

bind_to()

new_particle()

Overloaded function.

1. new_particle(self: ecell4_base.gillespie.GillespieWorld, arg0: ecell4_base.core.Particle) -> Tuple[Tuple[ecell4_base.core.ParticleID, ecell4_base.core.Particle], bool]

2. new_particle(self: ecell4_base.gillespie.GillespieWorld, arg0: ecell4_base.core.Species, arg1: ecell4_base.core.Real3) -> Tuple[Tuple[ecell4_base.core.ParticleID, ecell4_base.core.Particle], bool]

remove_molecules()

rng()

set_value()

class ecell4_base.gillespie.ReactionInfo

Bases: pybind11_builtins.pybind11_object

Methods

products()
reactants()
t()

products()

reactants()

t()

ecell4_base.gillespie.Simulator

alias of ecell4_base.gillespie.GillespieSimulator

ecell4_base.gillespie.World

alias of ecell4_base.gillespie.GillespieWorld

E-Cell4 ode API

A submodule of ecell4_base

ecell4_base.ode.Factory

alias of ecell4_base.ode.ODEFactory

class ecell4_base.ode.ODEFactory

Bases: pybind11_builtins.pybind11_object

Methods

rng()
simulator()	Overloaded function.
world()	Overloaded function.

rng()

simulator()

Overloaded function.

1. simulator(self: ecell4_base.ode.ODEFactory, world: ecell4::ode::ODEWorld) -> ecell4::ode::ODESimulator

2. simulator(self: ecell4_base.ode.ODEFactory, world: ecell4::ode::ODEWorld, model: ecell4_base.core.Model) -> ecell4::ode::ODESimulator

world()

Overloaded function.

1. world(self: ecell4_base.ode.ODEFactory, edge_lengths: ecell4_base.core.Real3 = <ecell4_base.core.Real3 object at 0x7fad0497c1b8>) -> ecell4::ode::ODEWorld

2. world(self: ecell4_base.ode.ODEFactory, volume: float) -> ecell4::ode::ODEWorld

3. world(self: ecell4_base.ode.ODEFactory, filename: str) -> ecell4::ode::ODEWorld

4. world(self: ecell4_base.ode.ODEFactory, model: ecell4_base.core.Model) -> ecell4::ode::ODEWorld

class ecell4_base.ode.ODESimulator

Bases: ecell4_base.core.Simulator

Methods

absolute_tolerance()
check_reaction()
dt()
initialize()
model()
next_time()
num_steps()
relative_tolerance()
run()	Overloaded function.
set_absolute_tolerance()
set_dt()
set_relative_tolerance()
set_t()
step()	Overloaded function.
t()
world()

absolute_tolerance()

model()

relative_tolerance()

run()

Overloaded function.

1. run(self: ecell4_base.ode.ODESimulator, duration: float, is_dirty: bool = True) -> None

2. run(self: ecell4_base.ode.ODESimulator, duration: float, observer: ecell4_base.core.Observer, is_dirty: bool = True) -> None

3. run(self: ecell4_base.ode.ODESimulator, duration: float, observers: List[ecell4_base.core.Observer], is_dirty: bool = True) -> None

set_absolute_tolerance()

set_relative_tolerance()

set_t()

world()

class ecell4_base.ode.ODESolverType

Bases: pybind11_builtins.pybind11_object

Members:

RUNGE_KUTTA_CASH_KARP54

ROSENBROCK4_CONTROLLER

EULER

Attributes

name

(self: handle) -> str

EULER = ODESolverType.EULER

ROSENBROCK4_CONTROLLER = ODESolverType.ROSENBROCK4_CONTROLLER

RUNGE_KUTTA_CASH_KARP54 = ODESolverType.RUNGE_KUTTA_CASH_KARP54

name

(self: handle) -> str

class ecell4_base.ode.ODEWorld

Bases: ecell4_base.core.WorldInterface

Methods

add_molecules()	Overloaded function.
bind_to()
edge_lengths()
evaluate()
get_particle()
get_value()
get_value_exact()
has_particle()
has_species()
list_particles()	Overloaded function.
list_particles_exact()
list_species()
load()
new_particle()	Overloaded function.
num_molecules()
num_molecules_exact()
num_particles()	Overloaded function.
num_particles_exact()
release_species()
remove_molecules()
reserve_species()
save()
set_t()
set_value()
set_volume()
t()
volume()

add_molecules()

Overloaded function.

1. add_molecules(self: ecell4_base.ode.ODEWorld, arg0: ecell4_base.core.Species, arg1: float) -> None

2. add_molecules(self: ecell4_base.ode.ODEWorld, arg0: ecell4_base.core.Species, arg1: int, arg2: ecell4_base.core.Shape) -> None

bind_to()

evaluate()

new_particle()

Overloaded function.

1. new_particle(self: ecell4_base.ode.ODEWorld, arg0: ecell4_base.core.Particle) -> Tuple[Tuple[ecell4_base.core.ParticleID, ecell4_base.core.Particle], bool]

2. new_particle(self: ecell4_base.ode.ODEWorld, arg0: ecell4_base.core.Species, arg1: ecell4_base.core.Real3) -> Tuple[Tuple[ecell4_base.core.ParticleID, ecell4_base.core.Particle], bool]

release_species()

remove_molecules()

reserve_species()

set_value()

set_volume()

ecell4_base.ode.Simulator

alias of ecell4_base.ode.ODESimulator

ecell4_base.ode.World

alias of ecell4_base.ode.ODEWorld

E-Cell4 meso API

A submodule of ecell4_base

ecell4_base.meso.Factory

alias of ecell4_base.meso.MesoscopicFactory

class ecell4_base.meso.MesoscopicFactory

Bases: pybind11_builtins.pybind11_object

Methods

rng()
simulator()	Overloaded function.
world()	Overloaded function.

rng()

simulator()

Overloaded function.

1. simulator(self: ecell4_base.meso.MesoscopicFactory, world: ecell4::meso::MesoscopicWorld) -> ecell4::meso::MesoscopicSimulator

2. simulator(self: ecell4_base.meso.MesoscopicFactory, world: ecell4::meso::MesoscopicWorld, model: ecell4_base.core.Model) -> ecell4::meso::MesoscopicSimulator

world()

Overloaded function.

1. world(self: ecell4_base.meso.MesoscopicFactory, edge_lengths: ecell4_base.core.Real3 = <ecell4_base.core.Real3 object at 0x7fad072ee030>) -> ecell4::meso::MesoscopicWorld

2. world(self: ecell4_base.meso.MesoscopicFactory, volume: float) -> ecell4::meso::MesoscopicWorld

3. world(self: ecell4_base.meso.MesoscopicFactory, filename: str) -> ecell4::meso::MesoscopicWorld

4. world(self: ecell4_base.meso.MesoscopicFactory, model: ecell4_base.core.Model) -> ecell4::meso::MesoscopicWorld

class ecell4_base.meso.MesoscopicSimulator

Bases: ecell4_base.core.Simulator

Methods

check_reaction()
dt()
initialize()
last_reactions()
model()
next_time()
num_steps()
run()	Overloaded function.
set_dt()
set_t()
step()	Overloaded function.
t()
world()

last_reactions()

model()

run()

Overloaded function.

1. run(self: ecell4_base.meso.MesoscopicSimulator, duration: float, is_dirty: bool = True) -> None

2. run(self: ecell4_base.meso.MesoscopicSimulator, duration: float, observer: ecell4_base.core.Observer, is_dirty: bool = True) -> None

3. run(self: ecell4_base.meso.MesoscopicSimulator, duration: float, observers: List[ecell4_base.core.Observer], is_dirty: bool = True) -> None

set_t()

world()

class ecell4_base.meso.MesoscopicWorld

Bases: ecell4_base.core.WorldInterface

Methods

add_molecules()	Overloaded function.
add_structure()
bind_to()
check_structure()
coord2global()
edge_lengths()
get_occupancy()	Overloaded function.
get_particle()
get_value()
get_value_exact()
get_volume()
global2coord()
has_particle()
has_species()
has_structure()
list_coordinates()
list_coordinates_exact()
list_particles()	Overloaded function.
list_particles_exact()
list_species()
load()
matrix_sizes()
new_particle()	Overloaded function.
num_molecules()	Overloaded function.
num_molecules_exact()
num_particles()	Overloaded function.
num_particles_exact()
num_subvolumes()	Overloaded function.
on_structure()
position2coordinate()
position2global()
remove_molecules()	Overloaded function.
rng()
save()
set_t()
set_value()
subvolume()
subvolume_edge_lengths()
t()
volume()

add_molecules()

Overloaded function.

1. add_molecules(self: ecell4_base.meso.MesoscopicWorld, arg0: ecell4_base.core.Species, arg1: int) -> None

2. add_molecules(self: ecell4_base.meso.MesoscopicWorld, arg0: ecell4_base.core.Species, arg1: int, arg2: int) -> None

3. add_molecules(self: ecell4_base.meso.MesoscopicWorld, arg0: ecell4_base.core.Species, arg1: int, arg2: ecell4_base.core.Integer3) -> None

4. add_molecules(self: ecell4_base.meso.MesoscopicWorld, arg0: ecell4_base.core.Species, arg1: int, arg2: ecell4_base.core.Shape) -> None

add_structure()

bind_to()

check_structure()

coord2global()

get_occupancy()

Overloaded function.

1. get_occupancy(self: ecell4_base.meso.MesoscopicWorld, arg0: ecell4_base.core.Species, arg1: int) -> float

2. get_occupancy(self: ecell4_base.meso.MesoscopicWorld, arg0: ecell4_base.core.Species, arg1: ecell4_base.core.Integer3) -> float

get_volume()

global2coord()

has_structure()

list_coordinates()

list_coordinates_exact()

matrix_sizes()

new_particle()

Overloaded function.

1. new_particle(self: ecell4_base.meso.MesoscopicWorld, arg0: ecell4_base.core.Particle) -> Tuple[Tuple[ecell4_base.core.ParticleID, ecell4_base.core.Particle], bool]

2. new_particle(self: ecell4_base.meso.MesoscopicWorld, arg0: ecell4_base.core.Species, arg1: ecell4_base.core.Real3) -> Tuple[Tuple[ecell4_base.core.ParticleID, ecell4_base.core.Particle], bool]

num_molecules()

Overloaded function.

1. num_molecules(self: ecell4_base.meso.MesoscopicWorld, arg0: ecell4_base.core.Species) -> int

2. num_molecules(self: ecell4_base.meso.MesoscopicWorld, arg0: ecell4_base.core.Species, arg1: int) -> int

3. num_molecules(self: ecell4_base.meso.MesoscopicWorld, arg0: ecell4_base.core.Species, arg1: ecell4_base.core.Integer3) -> int

num_subvolumes()

Overloaded function.

1. num_subvolumes(self: ecell4_base.meso.MesoscopicWorld) -> int

2. num_subvolumes(self: ecell4_base.meso.MesoscopicWorld, arg0: ecell4_base.core.Species) -> int

on_structure()

position2coordinate()

position2global()

remove_molecules()

Overloaded function.

1. remove_molecules(self: ecell4_base.meso.MesoscopicWorld, arg0: ecell4_base.core.Species, arg1: int) -> None

2. remove_molecules(self: ecell4_base.meso.MesoscopicWorld, arg0: ecell4_base.core.Species, arg1: int, arg2: ecell4_base.core.Integer3) -> None

3. remove_molecules(self: ecell4_base.meso.MesoscopicWorld, arg0: ecell4_base.core.Species, arg1: int, arg2: int) -> None

rng()

set_value()

subvolume()

subvolume_edge_lengths()

class ecell4_base.meso.ReactionInfo

Bases: pybind11_builtins.pybind11_object

Methods

coordinate()
products()
reactants()
t()

coordinate()

products()

reactants()

t()

ecell4_base.meso.Simulator

alias of ecell4_base.meso.MesoscopicSimulator

ecell4_base.meso.World

alias of ecell4_base.meso.MesoscopicWorld

E-Cell4 spatiocyte API

A submodule of ecell4_base

ecell4_base.spatiocyte.Factory

alias of ecell4_base.spatiocyte.SpatiocyteFactory

class ecell4_base.spatiocyte.ReactionInfo

Bases: pybind11_builtins.pybind11_object

Methods

products()
reactants()
t()

products()

reactants()

t()

class ecell4_base.spatiocyte.ReactionInfoItem

Bases: pybind11_builtins.pybind11_object

Attributes

pid

species

voxel

pid

species

voxel

ecell4_base.spatiocyte.Simulator

alias of ecell4_base.spatiocyte.SpatiocyteSimulator

class ecell4_base.spatiocyte.SpatiocyteFactory

Bases: pybind11_builtins.pybind11_object

Methods

rng()
simulator()	Overloaded function.
world()	Overloaded function.

rng()

simulator()

Overloaded function.

1. simulator(self: ecell4_base.spatiocyte.SpatiocyteFactory, world: ecell4::spatiocyte::SpatiocyteWorld) -> ecell4::spatiocyte::SpatiocyteSimulator

2. simulator(self: ecell4_base.spatiocyte.SpatiocyteFactory, world: ecell4::spatiocyte::SpatiocyteWorld, model: ecell4_base.core.Model) -> ecell4::spatiocyte::SpatiocyteSimulator

world()

Overloaded function.

1. world(self: ecell4_base.spatiocyte.SpatiocyteFactory, edge_lengths: ecell4_base.core.Real3 = <ecell4_base.core.Real3 object at 0x7fad0497c3b0>) -> ecell4::spatiocyte::SpatiocyteWorld

2. world(self: ecell4_base.spatiocyte.SpatiocyteFactory, volume: float) -> ecell4::spatiocyte::SpatiocyteWorld

3. world(self: ecell4_base.spatiocyte.SpatiocyteFactory, filename: str) -> ecell4::spatiocyte::SpatiocyteWorld

4. world(self: ecell4_base.spatiocyte.SpatiocyteFactory, model: ecell4_base.core.Model) -> ecell4::spatiocyte::SpatiocyteWorld

class ecell4_base.spatiocyte.SpatiocyteSimulator

Bases: ecell4_base.core.Simulator

Methods

check_reaction()
dt()
initialize()
last_reactions()
model()
next_time()
num_steps()
run()	Overloaded function.
set_dt()
set_t()
step()	Overloaded function.
t()
world()

last_reactions()

model()

run()

Overloaded function.

1. run(self: ecell4_base.spatiocyte.SpatiocyteSimulator, duration: float, is_dirty: bool = True) -> None

2. run(self: ecell4_base.spatiocyte.SpatiocyteSimulator, duration: float, observer: ecell4_base.core.Observer, is_dirty: bool = True) -> None

3. run(self: ecell4_base.spatiocyte.SpatiocyteSimulator, duration: float, observers: List[ecell4_base.core.Observer], is_dirty: bool = True) -> None

set_t()

world()

class ecell4_base.spatiocyte.SpatiocyteWorld

Bases: ecell4_base.core.WorldInterface

Methods

add_molecules()	Overloaded function.
add_structure()
bind_to()
calculate_hcp_lengths()
calculate_shape()
calculate_volume()
calculate_voxel_volume()
edge_lengths()
get_particle()
get_value()
get_value_exact()
get_volume()
get_voxel()
get_voxel_at()
get_voxel_near_by()
has_particle()
has_species()
list_non_structure_particles()
list_particles()	Overloaded function.
list_particles_exact()
list_species()
list_structure_particles()
load()
new_particle()	Overloaded function.
new_voxel()
new_voxel_structure()
num_molecules()
num_molecules_exact()
num_particles()	Overloaded function.
num_particles_exact()
remove_molecules()
remove_particle()
rng()
save()
set_t()
set_value()
shape()
size()
t()
update_particle()
volume()
voxel_radius()
voxel_volume()

add_molecules()

Overloaded function.

1. add_molecules(self: ecell4_base.spatiocyte.SpatiocyteWorld, arg0: ecell4_base.core.Species, arg1: int) -> bool

2. add_molecules(self: ecell4_base.spatiocyte.SpatiocyteWorld, arg0: ecell4_base.core.Species, arg1: int, arg2: ecell4_base.core.Shape) -> bool

add_structure()

bind_to()

calculate_hcp_lengths()

calculate_shape()

calculate_volume()

calculate_voxel_volume()

get_volume()

get_voxel()

get_voxel_at()

get_voxel_near_by()

list_non_structure_particles()

list_structure_particles()

new_particle()

Overloaded function.

1. new_particle(self: ecell4_base.spatiocyte.SpatiocyteWorld, arg0: ecell4_base.core.Particle) -> Optional[ecell4_base.core.ParticleID]

2. new_particle(self: ecell4_base.spatiocyte.SpatiocyteWorld, arg0: ecell4_base.core.Species, arg1: ecell4_base.core.Real3) -> Optional[ecell4_base.core.ParticleID]

new_voxel()

new_voxel_structure()

remove_molecules()

remove_particle()

rng()

set_value()

shape()

size()

update_particle()

voxel_radius()

voxel_volume()

class ecell4_base.spatiocyte.Voxel

Bases: pybind11_builtins.pybind11_object

Methods

list_neighbors()
position()

list_neighbors()

position()

ecell4_base.spatiocyte.World

alias of ecell4_base.spatiocyte.SpatiocyteWorld

ecell4_base.spatiocyte.create_spatiocyte_world_cell_list_impl()

ecell4_base.spatiocyte.create_spatiocyte_world_square_offlattice_impl()

ecell4_base.spatiocyte.create_spatiocyte_world_vector_impl()

E-Cell4 bd API

A submodule of ecell4_base

class ecell4_base.bd.BDFactory

Bases: pybind11_builtins.pybind11_object

Methods

rng()
simulator()	Overloaded function.
world()	Overloaded function.

rng()

simulator()

Overloaded function.

1. simulator(self: ecell4_base.bd.BDFactory, world: ecell4::bd::BDWorld) -> ecell4::bd::BDSimulator

2. simulator(self: ecell4_base.bd.BDFactory, world: ecell4::bd::BDWorld, model: ecell4_base.core.Model) -> ecell4::bd::BDSimulator

world()

Overloaded function.

1. world(self: ecell4_base.bd.BDFactory, edge_lengths: ecell4_base.core.Real3 = <ecell4_base.core.Real3 object at 0x7fad072ee998>) -> ecell4::bd::BDWorld

2. world(self: ecell4_base.bd.BDFactory, volume: float) -> ecell4::bd::BDWorld

3. world(self: ecell4_base.bd.BDFactory, filename: str) -> ecell4::bd::BDWorld

4. world(self: ecell4_base.bd.BDFactory, model: ecell4_base.core.Model) -> ecell4::bd::BDWorld

class ecell4_base.bd.BDSimulator

Bases: ecell4_base.core.Simulator

Methods

check_reaction()
dt()
initialize()
last_reactions()
model()
next_time()
num_steps()
run()	Overloaded function.
set_dt()
set_t()
step()	Overloaded function.
t()
world()

last_reactions()

model()

run()

Overloaded function.

1. run(self: ecell4_base.bd.BDSimulator, duration: float, is_dirty: bool = True) -> None

2. run(self: ecell4_base.bd.BDSimulator, duration: float, observer: ecell4_base.core.Observer, is_dirty: bool = True) -> None

3. run(self: ecell4_base.bd.BDSimulator, duration: float, observers: List[ecell4_base.core.Observer], is_dirty: bool = True) -> None

set_t()

world()

class ecell4_base.bd.BDWorld

Bases: ecell4_base.core.WorldInterface

Methods

add_molecules()	Overloaded function.
apply_boundary()
bind_to()
distance()
distance_sq()
edge_lengths()
get_particle()
get_value()
get_value_exact()
has_particle()
has_species()
list_particles()	Overloaded function.
list_particles_exact()
list_particles_within_radius()	Overloaded function.
list_species()
load()
new_particle()	Overloaded function.
num_molecules()
num_molecules_exact()
num_particles()	Overloaded function.
num_particles_exact()
periodic_transpose()
remove_molecules()
remove_particle()
rng()
save()
set_t()
t()
update_particle()
volume()

add_molecules()

Overloaded function.

1. add_molecules(self: ecell4_base.bd.BDWorld, arg0: ecell4_base.core.Species, arg1: int) -> None

2. add_molecules(self: ecell4_base.bd.BDWorld, arg0: ecell4_base.core.Species, arg1: int, arg2: ecell4_base.core.Shape) -> None

apply_boundary()

bind_to()

distance()

distance_sq()

list_particles_within_radius()

Overloaded function.

1. list_particles_within_radius(self: ecell4_base.bd.BDWorld, arg0: ecell4_base.core.Real3, arg1: float) -> List[Tuple[Tuple[ecell4_base.core.ParticleID, ecell4_base.core.Particle], float]]

2. list_particles_within_radius(self: ecell4_base.bd.BDWorld, arg0: ecell4_base.core.Real3, arg1: float, arg2: ecell4_base.core.ParticleID) -> List[Tuple[Tuple[ecell4_base.core.ParticleID, ecell4_base.core.Particle], float]]

3. list_particles_within_radius(self: ecell4_base.bd.BDWorld, arg0: ecell4_base.core.Real3, arg1: float, arg2: ecell4_base.core.ParticleID, arg3: ecell4_base.core.ParticleID) -> List[Tuple[Tuple[ecell4_base.core.ParticleID, ecell4_base.core.Particle], float]]

new_particle()

Overloaded function.

1. new_particle(self: ecell4_base.bd.BDWorld, arg0: ecell4_base.core.Particle) -> Tuple[Tuple[ecell4_base.core.ParticleID, ecell4_base.core.Particle], bool]

2. new_particle(self: ecell4_base.bd.BDWorld, arg0: ecell4_base.core.Species, arg1: ecell4_base.core.Real3) -> Tuple[Tuple[ecell4_base.core.ParticleID, ecell4_base.core.Particle], bool]

periodic_transpose()

remove_molecules()

remove_particle()

rng()

update_particle()

ecell4_base.bd.Factory

alias of ecell4_base.bd.BDFactory

class ecell4_base.bd.ReactionInfo

Bases: pybind11_builtins.pybind11_object

Methods

products()
reactants()
t()

products()

reactants()

t()

ecell4_base.bd.Simulator

alias of ecell4_base.bd.BDSimulator

ecell4_base.bd.World

alias of ecell4_base.bd.BDWorld

E-Cell4 egfrd API

A submodule of ecell4_base

class ecell4_base.egfrd.BDFactory

Bases: pybind11_builtins.pybind11_object

Methods

rng()
simulator()	Overloaded function.
world()	Overloaded function.

rng()

simulator()

Overloaded function.

1. simulator(self: ecell4_base.egfrd.BDFactory, world: World<CyclicWorldTraits<double> >) -> ecell4_base.egfrd.BDSimulator

2. simulator(self: ecell4_base.egfrd.BDFactory, world: World<CyclicWorldTraits<double> >, model: ecell4_base.core.Model) -> ecell4_base.egfrd.BDSimulator

world()

Overloaded function.

1. world(self: ecell4_base.egfrd.BDFactory, edge_lengths: ecell4_base.core.Real3 = <ecell4_base.core.Real3 object at 0x7fad072ee650>) -> World<CyclicWorldTraits<double> >

2. world(self: ecell4_base.egfrd.BDFactory, volume: float) -> World<CyclicWorldTraits<double> >

3. world(self: ecell4_base.egfrd.BDFactory, filename: str) -> World<CyclicWorldTraits<double> >

4. world(self: ecell4_base.egfrd.BDFactory, model: ecell4_base.core.Model) -> World<CyclicWorldTraits<double> >

class ecell4_base.egfrd.BDSimulator

Bases: ecell4_base.core.Simulator

Methods

add_potential()	Overloaded function.
check_reaction()
dt()
dt_factor()
initialize()
last_reactions()
model()
next_time()
num_steps()
run()	Overloaded function.
set_dt()
set_t()
step()	Overloaded function.
t()
world()

add_potential()

Overloaded function.

1. add_potential(self: ecell4_base.egfrd.BDSimulator, arg0: ecell4_base.core.Species, arg1: float) -> None

2. add_potential(self: ecell4_base.egfrd.BDSimulator, arg0: ecell4_base.core.Species, arg1: ecell4_base.core.Shape) -> None

3. add_potential(self: ecell4_base.egfrd.BDSimulator, arg0: ecell4_base.core.Species, arg1: ecell4_base.core.Shape, arg2: float) -> None

dt_factor()

last_reactions()

model()

run()

Overloaded function.

1. run(self: ecell4_base.egfrd.BDSimulator, duration: float, is_dirty: bool = True) -> None

2. run(self: ecell4_base.egfrd.BDSimulator, duration: float, observer: ecell4_base.core.Observer, is_dirty: bool = True) -> None

3. run(self: ecell4_base.egfrd.BDSimulator, duration: float, observers: List[ecell4_base.core.Observer], is_dirty: bool = True) -> None

set_t()

world()

class ecell4_base.egfrd.EGFRDFactory

Bases: pybind11_builtins.pybind11_object

Methods

rng()
simulator()	Overloaded function.
world()	Overloaded function.

rng()

simulator()

Overloaded function.

1. simulator(self: ecell4_base.egfrd.EGFRDFactory, world: World<CyclicWorldTraits<double> >) -> EGFRDSimulator<EGFRDSimulatorTraitsBase<World<CyclicWorldTraits<double> > > >

2. simulator(self: ecell4_base.egfrd.EGFRDFactory, world: World<CyclicWorldTraits<double> >, model: ecell4_base.core.Model) -> EGFRDSimulator<EGFRDSimulatorTraitsBase<World<CyclicWorldTraits<double> > > >

world()

Overloaded function.

1. world(self: ecell4_base.egfrd.EGFRDFactory, edge_lengths: ecell4_base.core.Real3 = <ecell4_base.core.Real3 object at 0x7fad072ee3b0>) -> World<CyclicWorldTraits<double> >

2. world(self: ecell4_base.egfrd.EGFRDFactory, volume: float) -> World<CyclicWorldTraits<double> >

3. world(self: ecell4_base.egfrd.EGFRDFactory, filename: str) -> World<CyclicWorldTraits<double> >

4. world(self: ecell4_base.egfrd.EGFRDFactory, model: ecell4_base.core.Model) -> World<CyclicWorldTraits<double> >

class ecell4_base.egfrd.EGFRDSimulator

Bases: ecell4_base.core.Simulator

Methods

check_reaction()
dt()
initialize()
last_reactions()
model()
next_time()
num_steps()
run()	Overloaded function.
set_dt()
set_paranoiac()
set_t()
step()	Overloaded function.
t()
world()

last_reactions()

model()

run()

Overloaded function.

1. run(self: ecell4_base.egfrd.EGFRDSimulator, duration: float, is_dirty: bool = True) -> None

2. run(self: ecell4_base.egfrd.EGFRDSimulator, duration: float, observer: ecell4_base.core.Observer, is_dirty: bool = True) -> None

3. run(self: ecell4_base.egfrd.EGFRDSimulator, duration: float, observers: List[ecell4_base.core.Observer], is_dirty: bool = True) -> None

set_paranoiac()

set_t()

world()

class ecell4_base.egfrd.EGFRDWorld

Bases: ecell4_base.core.WorldInterface

Methods

add_molecules()	Overloaded function.
apply_boundary()
bind_to()
distance()
edge_lengths()
get_particle()
get_value()
get_value_exact()
has_particle()
has_species()
list_particles()	Overloaded function.
list_particles_exact()
list_particles_within_radius()	Overloaded function.
list_species()
load()
matrix_sizes()
new_particle()	Overloaded function.
num_molecules()
num_molecules_exact()
num_particles()	Overloaded function.
num_particles_exact()
remove_molecules()
remove_particle()
rng()
save()
set_t()
set_value()
t()
update_particle()
volume()

add_molecules()

Overloaded function.

1. add_molecules(self: ecell4_base.egfrd.EGFRDWorld, arg0: ecell4_base.core.Species, arg1: int) -> None

2. add_molecules(self: ecell4_base.egfrd.EGFRDWorld, arg0: ecell4_base.core.Species, arg1: int, arg2: ecell4_base.core.Shape) -> None

apply_boundary()

bind_to()

distance()

list_particles_within_radius()

Overloaded function.

1. list_particles_within_radius(self: ecell4_base.egfrd.EGFRDWorld, arg0: ecell4_base.core.Real3, arg1: float) -> List[Tuple[Tuple[ecell4_base.core.ParticleID, ecell4_base.core.Particle], float]]

2. list_particles_within_radius(self: ecell4_base.egfrd.EGFRDWorld, arg0: ecell4_base.core.Real3, arg1: float, arg2: ecell4_base.core.ParticleID) -> List[Tuple[Tuple[ecell4_base.core.ParticleID, ecell4_base.core.Particle], float]]

3. list_particles_within_radius(self: ecell4_base.egfrd.EGFRDWorld, arg0: ecell4_base.core.Real3, arg1: float, arg2: ecell4_base.core.ParticleID, arg3: ecell4_base.core.ParticleID) -> List[Tuple[Tuple[ecell4_base.core.ParticleID, ecell4_base.core.Particle], float]]

matrix_sizes()

new_particle()

Overloaded function.

1. new_particle(self: ecell4_base.egfrd.EGFRDWorld, arg0: ecell4_base.core.Particle) -> Tuple[Tuple[ecell4_base.core.ParticleID, ecell4_base.core.Particle], bool]

2. new_particle(self: ecell4_base.egfrd.EGFRDWorld, arg0: ecell4_base.core.Species, arg1: ecell4_base.core.Real3) -> Tuple[Tuple[ecell4_base.core.ParticleID, ecell4_base.core.Particle], bool]

remove_molecules()

remove_particle()

rng()

set_value()

update_particle()

ecell4_base.egfrd.Factory

alias of ecell4_base.egfrd.EGFRDFactory

class ecell4_base.egfrd.ReactionInfo

Bases: pybind11_builtins.pybind11_object

Methods

products()
reactants()
t()

products()

reactants()

t()

ecell4_base.egfrd.Simulator

alias of ecell4_base.egfrd.EGFRDSimulator

ecell4_base.egfrd.World

alias of ecell4_base.egfrd.EGFRDWorld